Is there a punch available to set the rivets? I have terrible aim with a hammer, and the bar would have peen dents all around the rivet by the time I was done, the barshop would be nice to flatten it also, or else if I did it, the rivet would be in the middle of an ash tray from where I missed with the BFH. Thanks for the video
Hello Friend. I'm from Poland. I work professionally in felling trees. I have a Stihl ms 461 R. I have a question: how can I increase the saw's power just like you do? I like your movies. Greetings.
Hey man, thanks for posting so many great videos, we really appreciate the time you out into them! Do you feel Tsumura bars are capable of handling a fair amount of bore cutting? I have been considering switching from Stihl Lights to Tsumuras, but have been hesitant because I do a lot of bore cutting and don't want to be blowing tips all the time. Thanks for any help you can give
@@bonscottforever Because it has 4 pins in 3/8 configuration as it comes from the factory. If you put a 404 nose sprocket as here it has 6 pins and far more sturdy.
I'm European, and I've used Tsumura for a long time. You can buy both Sugihara and Tsumura lightweight bars in Europe. Infact, I've found it quite difficult to get hold of Oregon lightweight bars in Europe, versus the Japanese brands.
no. schaeffer 7000 or 9000. I have a video of klotz super tech take down on a 661. Also did original techniplate but no video. Not as bad as super techniplate.
It's always best to put a small punch mark in the center of where you're going to drill to keep from drill bit drift.
IMO yum jd😅iz as no&9th.😮&’ I😅I🤔👏😃🧑🏿🏭😮🕵🏿♂️😮😮🧑🏻🌾😮👨🏻🏫👨🏾🏭😅ujg
Is there a punch available to set the rivets? I have terrible aim with a hammer, and the bar would have peen dents all around the rivet by the time I was done, the barshop would be nice to flatten it also, or else if I did it, the rivet would be in the middle of an ash tray from where I missed with the BFH. Thanks for the video
BFH will help almost any project.........happy gobbler day guys
What a very ignorant way to install a chainsaw bar tip by beating it and the bar to death, instead of using the proper crimp tool.
Happy Thanksgiving Jullian.
Same to you sir.
Hello Friend. I'm from Poland. I work professionally in felling trees. I have a Stihl ms 461 R. I have a question: how can I increase the saw's power just like you do? I like your movies. Greetings.
check my videos. Muffler mod goes a long way.
Hey man, thanks for posting so many great videos, we really appreciate the time you out into them! Do you feel Tsumura bars are capable of handling a fair amount of bore cutting? I have been considering switching from Stihl Lights to Tsumuras, but have been hesitant because I do a lot of bore cutting and don't want to be blowing tips all the time. Thanks for any help you can give
thank you sir. email me ammotesting@gmail.com
Julian, how is Scott doing??
still not smoking. so that is good. doing his rehab. we have been trying to get wood cut for winter. so no time to port.
What chain do you run ? Where can I get one ?
If you got to check if it's straight after the install then you ain't installing it right. LOL
Why did you change that?
What are those bars? Never heard of them, we only use
Stihl/husky factory bars here in europe. (Oregon sometimes too)
made in japan. very good. so is sugi hara but I like tsumura better.
@@Redbull661 This is a very good bar but the sprocket nose is too fragile.
@@bonscottforever Because it has 4 pins in 3/8 configuration as it comes from the factory. If you put a 404 nose sprocket as here it has 6 pins and far more sturdy.
I'm European, and I've used Tsumura for a long time. You can buy both Sugihara and Tsumura lightweight bars in Europe. Infact, I've found it quite difficult to get hold of Oregon lightweight bars in Europe, versus the Japanese brands.
Do you guys ever run klotz oil in your saws?
no. schaeffer 7000 or 9000. I have a video of klotz super tech take down on a 661. Also did original techniplate but no video. Not as bad as super techniplate.
Not sure how to break this to you so I will just spit it right out. Your drill press is on drugs. There I said it. :)
lol no doubt the thing is older than dirt!
@Maciej Jan Długosz
You are correct :)