dude, you're the best. by far, the best tutorial I have found. I just subscribed to your channel. very well explained, step by step. not like others that wont even show nothing. thanks again for the efforts. your tutorial is very informative, and very well explained Chris.
This is a great step by step without getting to in depth with balancing. Love this video. Exactly what I needed to know because I have the same set up except I use a different camera and lens
Chris, you have created the best video I could see (and I've seen a lot of them) on how to properly set up the new Zhiyun gimbal. I really appreciate you sharing your knowledge so much. Congratulations !
@@ChrisSpiegl Yes, I will buy a Pro+ soon. My experience with DJI and their use of mobile apps, which after a few years are not updated or stop working on new smartphone models, is not (in my opinion) the right way to sell a 1000€ product. On the other hand, Zhiyun's solution and its MasterEye Visual Controller seems to me the best way to have a product ready for audiovisual production in a package. The only 'downside' I can put to the Weebill 2 are its non-replaceable batteries. Sooner or later the batteries fail. The truth is that this is the weak point of this gimbal, which I hope the technical service can overcome when that situation arrives.
@@albertoacosta1531 good arguments. The whole battery thing though: yes, they’ll die at some point. But all things considered, do you really think there will not be something better you’ll buy in 2 or 4 years? I think so. The main downside is that you can’t replace them mid shoot. But you can charge them while you use it. So that’s always an option.
Hello, excellent video, I speak little English but I understood most of it, I would like to know with a 24 70 sigma to use all the zoom how would I do it to calibrate it, if in the middle of the zoom travel? And to know if from the cell phone I could manage focus to the camera with the app of my sony a7iv camera and if this camera is compatible with the gimbal? Thanks
Před rokem
Hey first of all thank you for this amazing video. I have an important question about video transmission system. If I use external recorder like ninja V to directly to camera, can I get the reference video from ninja V’s hdmi output and control the gimbal in same time? 1 cable for gimbal, 1 cable for camera and hdmi for ninja V.
@@ChrisSpiegl hey I got everything set up but I’m having issues with the camera and the monitor. Once I put it on video mode the monitor goes dark, I have a A6600. Trying to figure it out but with no success.
@@agentjtravel_walkthru4205 You mean the monitor of your camera goes dark? That's usually when you have setup the output of the camer to include the menues (or you are in photo mode). When you setup the HDMI port to output the "clean video" you should get the menues & video in camera + the clean video on the Weebill monitor.
@@ChrisSpiegl thank you Chris It’s the monitor on the Weebill is the one that goes dark, I might need to do a video about it. I’ll keep messing with the HDMI setting and see if that is it.
@@agentjtravel_walkthru4205 Ok, maybe also try around with the cables. The Weebill is pretty specific about which cable needs to be used for what. There are special cables for certain connections. And also which port you use on the Weebill matters. And ofcourse, the video connection only works when you also have the Transmission module.
Thank you, I do have this on my list but I am not sure how much I should go into detail and how important it is to be on location to film this properly. But I am fairly positive I will talk about these different modes in the next 6-12 weeks.
Hello, thank you for the installation wizard, I am thinking of using this gimbal with Canon EOS R6 Mark 2 and EF 16.35 F4 lens, there is an 'EF converter' in between. What I'm wondering and not sure about is whether the length of the converter hits any motors when using different modes. I'm worried that the camera will hit the gimbal or work at full limits.
I find that with the 15-35mm f/2.8 lens (huge and heavy) the whole gimbal struggles a bit and only works when I use the front weight backed on the lens. Otherwise, stuff is vibrating like crazy. This may work with your setup as well.
Video excepcional, recebi ontem o weebill 2 pro com o Monitor VC100, vou procurar configurar com os seus ensinamentos. Parabêns pelo video, mensagem do Brasil.
Hello Chris! I would like to know where I bought the 04:54 quick release (Andoer Arca Swiss) I looked for it and could not find it anywhere. Thanks. Excuse my English. I am using google translator haha. Greetings from Bolivia!
Seems I forgot to link to that specific product; I'll change that. However, I sadly was not able to find the product on the US amazon, but at least here are two alternatives: crsp.li/ArcaSwissQuickRelease
Hi Chris! .. i use this gimbal with the sony a7iii. When i connecting the cable between the gimbal and the camera (without a transmitter) allows me to focus and record from the gimbal's record button. But when I connect it to the transmitter, with everything connected, it no longer allows me to continue using that button from the gimbal to start recording. In general does that happen? or is it just me? (sorry my english, is not very well yet but i try haha)
Hi Gaby, for me it works with the Transmitter and also without the Transmitter in between. It is very important that you use the correct cable between the Transmitter and the Gimbal (and also the right USB-C port on the Gimbal to connect the Transmitter). So maybe check those and make sure you use the cable with the Yellow Tab to connect between the Transmitter and Gimbal. Then it should work for you too.
I don't have one, but surely there are ones. I personally found that it did not really work all that well. But it may be different now (possibly firmware updates).
Thanks for your thorough video on the Weebil 2. So I've updated the firmware for both my Sony FX3 and the Weebil 2 (v1.84). I've tried connecting the camera to the gimbal many times to no avail. It keeps saying "check connected device" and I'm using the USB-C to USB-C cable. What's weird is that on the Weebil Lab and the Weebil 2s there is an option to choose which camera you'll be connecting to (Canon, Sony, Panasonic, etc) but on the Weebil 2 menu screen there is nothing that I can find of that sort. If you have a solution, that would be greatly appreciated because I would love to control my camera from the gimbal handle itself the way you have mentioned it here. Thank you in advance! Best, Julius
Hi, I may not be the right person to chat with here. I do not own the FX3 and my Canon EOS R as well as a Sony a6400 I tested both worked more or less out of the box. The one thing I can think of is if you chose the right USB-C able. Apparently the Weebil 2 is pretty particular about which cable goes where. Like there is a special cable which can only be used for the connection between gimbal and transmission system and nothing else (and you also can not use a standard USB-C to C cable for said connection). Maybe the same is true for the USB-C connection? Have you used the original cables? Other point, did you choose the right USB-C port on the Weebill? There are two above each other and one on the opposite side which is for the camera. Hope any of this can help, if not, maybe the Zhiyun team can?
Did you ever get this to work? I'm hesitant to consider this gimbal as my Weebill S never connected correctly and then they stopped selling parts and updating the software prior to this model coming out. I have a basically useless transmount module that just stays in the box.
Yes, when using the TransMount AI you do have the ability to see the video on your smartphone (and control the gimbal/camera settings from there as well to a certain extend).
Great video Chris! I’m about to purchase a Weebill 2 and my question is: Can I buy the Combo package and then separately buy the CMF-06 transmount servo follow focus/zoom controller for focus/zoom control without buying the video transmount? I use a Sony A7S3 with a 24-105mm zoom.
I think you may need to reach out to Zhiyun for this. I remember I asked them about a specific piece of gear and they would be able to provide this individually. But they may have to shop directly from China which can incur different kinds of costs. Alternatively, sometimes you find these things individually on sites like eBay and special online shops.
@@IzharAshdot It depends what you are looking to achieve. If it's just for zooming (via the wheel on the Zhiyun) then it would work. But not to control with the app I don't think that works. But I also have not tested this myself.
@@IzharAshdot With focus (depending on the camera) you may not need the motor if the focus can be done electronically (some lenses / cameras are supported right out of the box). With Zoom it's a bit different and you most likely would need the motor.
hello, I bought the weebill 2 and when I turned it on for the first time I turned on the stabilizer but the screen stayed off, I got very stressed and what I did was update it and now I turn on the computer and it lasts only seconds and then it turns off. Does anyone know what can I do?? please Thank you so much
@@ChrisSpiegl Hi Chris, Sorry I didn't make myself very clear, I purchased a Andoer CL-50LS Quick Release Plate as you suggested for the Weebill 2 Pro. It doesn't fit the base plate that came with my Weebill 2 Pro.
@@johnharper5696 Ah I understand now. You put the Weebill 2 Pro baseplate on the camera. I actually never really used that and just left it in the box since I am using the Peak Design Arca Swiss base plates. Maybe I could have specified this a bit better. Was there a base plate in the package of the CL-50LS?
In Photo mode that is the default behaviour and there is no way around. In Video mode, you get to choose. However only between: Clean HDMI Out (in this case the Gimbal monitor shows the picture without any of the settings overlay, but when you go into the menu it will show the menu on the external screen) - and in the other mode you only see everything on the external monitor. So best would be to go into the "HDMI Output" (or something like that) menu point and see what you can switch around there.
Question: I have the Canon R6. How to I set up image transmission? I have it connected to the camera and the iso, Aperature works but the display for image says image transmission device is not connected. Any help would be greatly appreciated - thanks!!
Do you have the Image Transmission module? The one I have put under the camera with the two antennas? If not, than that's most likely it. If you do have this module, then I would suggest checking the cables. There are specific cables to connect the Transmission Module with the Gimbal (and it is also important to use the USB-C port which is on the back of the Gimbal arm to the right of the camera when the camera is pointed away from you, this port has a little Transmission module next to it printed). If all that fails, let me know again and I will try to help you furhter.
@@ChrisSpiegl Extremely helpful all around my friend! I do not have the transmitter although I did watch you portion on that. So - you need the transmitter for image few but you don't for Setting adjustment? Last question (as I see you have a canon) - is there touch focus on pull out screen given the transmitter was hooked up correct and if so is it solid? For a lot of my video work I do touch focus on gimbal work via auto servo. Thanks so much!!
@@matthewotis4333 Hi, you are correct, without the transmission module the built in display does not show the cameras video feed but the controls do work via USB. In terms of touch focus: i have not found it to be `solid` but it does work if used and setup properly. I still find the cameras built in touch focus more accurate though (if it's only focus you worry about).
Hi there. I just bought weebill 2..it came with 3 usb cable but I'm not sure how to charge my gimbal. Can you please advise? It's my first time buying a gimbal for my Mirrorless camera. Thank you!
I checked the manual (linked below). On page 290, you find the setting to choose between the Clean 4k/HD output or if you want the output with info. But upon reading this info it seems (though I can't test this) that maybe in those modes the camera can not record to card? Not sure. But worth checking out if you may: gdlp01.c-wss.com/gds/3/0300034173/01/EOS_RP_Advanced_User_Guide_EN.pdf
Hello Chris ... thanks for your support. The camera cannot record in this modes. However, when I put the camera on HDR, it records it, that's interesting. I will try another camera ... maybe I have the live picture on gimbal and camera. (Which camera do you use? I think EOS R, the live image works on gimbal and camera?)
@@j_filmz_6130 I understand, but I do not have a V-Mount and can't test it out. But V-Mount can provide all kinds of power from what I know, so you could run USB-C to the Gimbal for powering that and then a Dummy battery for the camera.
You'll need to use the appropriate cable. The instructions are probably on the Zhiyun Tech website. They provide a bunch of cables and there should be one USB-C to USB-C to fit with the A7IV.
when I cut my weebill 2 on after like 5 sec it beeps really loud , the white lights turn red and then the whole things shuts off except for the blinking red light....and the only thing that shows on my screen of the weebill is just the logo?????????? can anyone help???
I have not had this happen. There are two thoughts: - The weight is not balanced and the motors are going crazy and shutting off. - Or there is something wrong with the weebill. Please try to balance the gimbal properly and see if that helps. If not, please reach out to Zhiyun Tech support.
A few ideas: - Is the transmitter turned on? - Is the transmitter connected with the correct cable? - Is the HDMI port connected to your camera? - Is your camera outputting an HDMI signal? Maybe any of these can get you up and running?
Anyone having a vibration issue on underslung mode? Ive auto calibrated and set my mode settings to high using sony fx3 with lens 24-70 Zeiss. However, at times it starts to vibrate I'm not sure what am I doing wrong :/. I even updated the gimbal.
I've had this happen a couple of times. Restarted and calibrated again. When this happens it feels really weird since it's pretty random and erratic. I hope this gets fixed someday in firmware.
@@ChrisSpiegl ohhh wow thank you for responding I think I was going crazy because I keep on doing those check marks recalibrating, checking the balance etc and its getting annoying. I was thinking of repurchasing a new one. However, that may end up with the same issue lol
@@aodvisions I would recommend trying to get a really good balance doing it manually and then using the "digital balancing" just to confirm if it's all ok. If you do this a couple times it's actually quite impressive how balanced you can get the camera.
@@aodvisions I am talking about the balancing check you can do on the display of the Weebill 2 Pro where you see one bar for each motor and how stressed they are.
@@ChrisSpiegl hi dear thanks for your regard .i could fix it i used mistake cable , But i have another problem when i press record botton on gimbal, start to focous not recording , and control wheel it doesnt work for nothing , thanks if you could help me about it ,
@@mahbodkh3542 I do not use a Sony camera, so I can't really help you here. I just know that there are some things that work with my Canon EOS R and others do not (focus with RF lenses works, but zoom for example does not because zoom is not electronic). With the record button: I think there is a function in the camera where you can tell it that pressing the shutter button starts a recording, maybe when you activate that it does trigger recording via the record button on the gimbal.
Very confusing on how you actually placed the camera on the plate, especially when your camera recording is faced from the top, and you're using a completely different plate than the one provided in the actual kit.
dude, you're the best. by far, the best tutorial I have found. I just subscribed to your channel. very well explained, step by step. not like others that wont even show nothing. thanks again for the efforts. your tutorial is very informative, and very well explained Chris.
Awesome, thank you!
This is a great step by step without getting to in depth with balancing. Love this video. Exactly what I needed to know because I have the same set up except I use a different camera and lens
Thank you, I appreciate that 🌸.
Chris, you have created the best video I could see (and I've seen a lot of them) on how to properly set up the new Zhiyun gimbal.
I really appreciate you sharing your knowledge so much.
Congratulations !
Thank you, I truly appreciate that 🌸. I hope you'll find my other videos about this gimbal as helpful as this one 👍.
Are you considering buying one?
@@ChrisSpiegl Yes, I will buy a Pro+ soon.
My experience with DJI and their use of mobile apps, which after a few years are not updated or stop working on new smartphone models, is not (in my opinion) the right way to sell a 1000€ product.
On the other hand, Zhiyun's solution and its MasterEye Visual Controller seems to me the best way to have a product ready for audiovisual production in a package.
The only 'downside' I can put to the Weebill 2 are its non-replaceable batteries. Sooner or later the batteries fail. The truth is that this is the weak point of this gimbal, which I hope the technical service can overcome when that situation arrives.
@@albertoacosta1531 good arguments. The whole battery thing though: yes, they’ll die at some point. But all things considered, do you really think there will not be something better you’ll buy in 2 or 4 years? I think so. The main downside is that you can’t replace them mid shoot. But you can charge them while you use it. So that’s always an option.
Hi Chris,
Thank you for the great video, you have helped me order the Pro version today.
Well done.
Thank you for your comment and I am glad you found what you were looking for 👍. Happy gliding.
Thank YOU SO much !!! Very nice and understanding VIDEO !!! YOU`re Great !!!
Thank you, I appreciate that 🌸.
Oh my gosh thank you so much 💖
You're so welcome.
Thank You so much from TURKEY....... Teşekkürler
I bought this gimbal and i love it
That's awesome. It's an incredible gimbal.
Great video ! Which application do I have to download on my iPad to see the image transmission ??
Good setup guide!
Thank you 🙃
Thanks, great video
Glad you liked it!
Hello, excellent video, I speak little English but I understood most of it, I would like to know with a 24 70 sigma to use all the zoom how would I do it to calibrate it, if in the middle of the zoom travel? And to know if from the cell phone I could manage focus to the camera with the app of my sony a7iv camera and if this camera is compatible with the gimbal? Thanks
Hey first of all thank you for this amazing video. I have an important question about video transmission system. If I use external recorder like ninja V to directly to camera, can I get the reference video from ninja V’s hdmi output and control the gimbal in same time? 1 cable for gimbal, 1 cable for camera and hdmi for ninja V.
My Weebill 2 is arriving today!!! I can’t wait!!!! Thank you so much for this awesome video !!!
You'll most likely have a lot of fun with it! This is an incredible tool 🙌.
@@ChrisSpiegl hey I got everything set up but I’m having issues with the camera and the monitor. Once I put it on video mode the monitor goes dark, I have a A6600. Trying to figure it out but with no success.
@@agentjtravel_walkthru4205 You mean the monitor of your camera goes dark? That's usually when you have setup the output of the camer to include the menues (or you are in photo mode). When you setup the HDMI port to output the "clean video" you should get the menues & video in camera + the clean video on the Weebill monitor.
@@ChrisSpiegl thank you Chris It’s the monitor on the Weebill is the one that goes dark, I might need to do a video about it. I’ll keep messing with the HDMI setting and see if that is it.
@@agentjtravel_walkthru4205 Ok, maybe also try around with the cables. The Weebill is pretty specific about which cable needs to be used for what. There are special cables for certain connections. And also which port you use on the Weebill matters.
And ofcourse, the video connection only works when you also have the Transmission module.
awesome video, i wish moving forward you can explain the modes on the gimbal and useful situations on it
Thank you, I do have this on my list but I am not sure how much I should go into detail and how important it is to be on location to film this properly. But I am fairly positive I will talk about these different modes in the next 6-12 weeks.
Good job done
Thank you, I appreciate that 🌸.
Chris, did you make a Balancing video for weebill 2? i dont find it.
Hello, thank you for the installation wizard, I am thinking of using this gimbal with Canon EOS R6 Mark 2 and EF 16.35 F4 lens, there is an 'EF converter' in between. What I'm wondering and not sure about is whether the length of the converter hits any motors when using different modes. I'm worried that the camera will hit the gimbal or work at full limits.
I find that with the 15-35mm f/2.8 lens (huge and heavy) the whole gimbal struggles a bit and only works when I use the front weight backed on the lens. Otherwise, stuff is vibrating like crazy. This may work with your setup as well.
That arca mount comes in clutch. Been using it for couple years now since the crane 2 came out
Absolutely. It’s a must have on all my cameras and tripods.
Video excepcional, recebi ontem o weebill 2 pro com o Monitor VC100, vou procurar configurar com os seus ensinamentos. Parabêns pelo video, mensagem do Brasil.
Very nice, please inform that which charger & what is watt charger we can use to charge this gimbal ?
You can use 15V/1.6A(24W PD fast charger) to try.
What is the name of that device you're using to change camera angles
My Weebill 2 is staying in the mode “Stand by” while I’m using it, and soon after a beeping sound. Could you tell me why? Or maybe how to fix it?
Hello Chris! I would like to know where I bought the 04:54 quick release (Andoer Arca Swiss) I looked for it and could not find it anywhere. Thanks. Excuse my English. I am using google translator haha. Greetings from Bolivia!
Seems I forgot to link to that specific product; I'll change that. However, I sadly was not able to find the product on the US amazon, but at least here are two alternatives: crsp.li/ArcaSwissQuickRelease
Hi Chris! .. i use this gimbal with the sony a7iii. When i connecting the cable between the gimbal and the camera (without a transmitter) allows me to focus and record from the gimbal's record button. But when I connect it to the transmitter, with everything connected, it no longer allows me to continue using that button from the gimbal to start recording. In general does that happen? or is it just me? (sorry my english, is not very well yet but i try haha)
Hi Gaby, for me it works with the Transmitter and also without the Transmitter in between. It is very important that you use the correct cable between the Transmitter and the Gimbal (and also the right USB-C port on the Gimbal to connect the Transmitter). So maybe check those and make sure you use the cable with the Yellow Tab to connect between the Transmitter and Gimbal. Then it should work for you too.
Isn't there a tutorial on how to set up automatic tracking in the same webill?
I don't have one, but surely there are ones. I personally found that it did not really work all that well. But it may be different now (possibly firmware updates).
Thanks for your thorough video on the Weebil 2. So I've updated the firmware for both my Sony FX3 and the Weebil 2 (v1.84). I've tried connecting the camera to the gimbal many times to no avail. It keeps saying "check connected device" and I'm using the USB-C to USB-C cable. What's weird is that on the Weebil Lab and the Weebil 2s there is an option to choose which camera you'll be connecting to (Canon, Sony, Panasonic, etc) but on the Weebil 2 menu screen there is nothing that I can find of that sort. If you have a solution, that would be greatly appreciated because I would love to control my camera from the gimbal handle itself the way you have mentioned it here. Thank you in advance! Best, Julius
Hi, I may not be the right person to chat with here. I do not own the FX3 and my Canon EOS R as well as a Sony a6400 I tested both worked more or less out of the box. The one thing I can think of is if you chose the right USB-C able. Apparently the Weebil 2 is pretty particular about which cable goes where. Like there is a special cable which can only be used for the connection between gimbal and transmission system and nothing else (and you also can not use a standard USB-C to C cable for said connection). Maybe the same is true for the USB-C connection? Have you used the original cables?
Other point, did you choose the right USB-C port on the Weebill? There are two above each other and one on the opposite side which is for the camera.
Hope any of this can help, if not, maybe the Zhiyun team can?
Did you ever get this to work? I'm hesitant to consider this gimbal as my Weebill S never connected correctly and then they stopped selling parts and updating the software prior to this model coming out. I have a basically useless transmount module that just stays in the box.
Thanks you !
Is it possible to get a video feedback on his smartphone with the Zhiyun TransMount AI Transmetteur vidéo ?
Yes, when using the TransMount AI you do have the ability to see the video on your smartphone (and control the gimbal/camera settings from there as well to a certain extend).
Great video Chris!
I’m about to purchase a Weebill 2 and my question is:
Can I buy the Combo package and then separately buy the CMF-06 transmount servo follow focus/zoom controller for focus/zoom control without buying the video transmount?
I use a Sony A7S3 with a 24-105mm zoom.
I think you may need to reach out to Zhiyun for this. I remember I asked them about a specific piece of gear and they would be able to provide this individually. But they may have to shop directly from China which can incur different kinds of costs.
Alternatively, sometimes you find these things individually on sites like eBay and special online shops.
@@ChrisSpiegl Thank you Chris.
I can find the CMF-06 online, but my question is technical. Would it work without the transmitter?
@@IzharAshdot It depends what you are looking to achieve. If it's just for zooming (via the wheel on the Zhiyun) then it would work. But not to control with the app I don't think that works. But I also have not tested this myself.
@@ChrisSpiegl exactly. I would like to control either zoom or focus with wheel. Not the app.
@@IzharAshdot With focus (depending on the camera) you may not need the motor if the focus can be done electronically (some lenses / cameras are supported right out of the box). With Zoom it's a bit different and you most likely would need the motor.
Does the follow focus motor need to be charged first?
yes it needs to be fully charged.
hello,
I bought the weebill 2 and when I turned it on for the first time I turned on the stabilizer but the screen stayed off, I got very stressed and what I did was update it and now I turn on the computer and it lasts only seconds and then it turns off. Does anyone know what can I do?? please
Thank you so much
plz guide me . when i attach transmeter to gimbal . i cant balance tilt axis on gimbal very well . finish the way for going upper the tilt axis.
It's just a matter of trying it out and seeing how it balances best. No magic…
Hi Chris,
There was no base plate or screw on the box with the CL-50LS.
Would be nice if it would come with one. But luckily there are some you can get relatively in expensive on Amazon.
@@ChrisSpiegl
Hi Chris,
I have ordered a Falcam F38 Quick Release Plate, the camera comes out from the side.
John
Hi Chris,
Just letting you known I ordered a Quick Release Plate CL-50LS advertised from Andoer, it doesn't fit the base plate.
Hi John, it does not fit which base plate? The PeakDesign one? The one which comes with the Weebill 2? I am not sure what you mean.
@@ChrisSpiegl
Hi Chris,
Sorry I didn't make myself very clear,
I purchased a Andoer CL-50LS Quick Release Plate as you suggested for the Weebill 2 Pro. It doesn't fit the base plate that came with my Weebill 2 Pro.
@@johnharper5696 Ah I understand now. You put the Weebill 2 Pro baseplate on the camera. I actually never really used that and just left it in the box since I am using the Peak Design Arca Swiss base plates. Maybe I could have specified this a bit better. Was there a base plate in the package of the CL-50LS?
Zhiyun Weebill 2- The camera (EOS RP) monitor switches off when connected to the Gimbalmonitor. Do you have a solution for me?
In Photo mode that is the default behaviour and there is no way around.
In Video mode, you get to choose. However only between: Clean HDMI Out (in this case the Gimbal monitor shows the picture without any of the settings overlay, but when you go into the menu it will show the menu on the external screen) - and in the other mode you only see everything on the external monitor.
So best would be to go into the "HDMI Output" (or something like that) menu point and see what you can switch around there.
Question: I have the Canon R6. How to I set up image transmission? I have it connected to the camera and the iso, Aperature works but the display for image says image transmission device is not connected. Any help would be greatly appreciated - thanks!!
Do you have the Image Transmission module? The one I have put under the camera with the two antennas? If not, than that's most likely it.
If you do have this module, then I would suggest checking the cables. There are specific cables to connect the Transmission Module with the Gimbal (and it is also important to use the USB-C port which is on the back of the Gimbal arm to the right of the camera when the camera is pointed away from you, this port has a little Transmission module next to it printed).
If all that fails, let me know again and I will try to help you furhter.
@@ChrisSpiegl Extremely helpful all around my friend! I do not have the transmitter although I did watch you portion on that. So - you need the transmitter for image few but you don't for Setting adjustment? Last question (as I see you have a canon) - is there touch focus on pull out screen given the transmitter was hooked up correct and if so is it solid? For a lot of my video work I do touch focus on gimbal work via auto servo. Thanks so much!!
@@matthewotis4333 Hi, you are correct, without the transmission module the built in display does not show the cameras video feed but the controls do work via USB.
In terms of touch focus: i have not found it to be `solid` but it does work if used and setup properly.
I still find the cameras built in touch focus more accurate though (if it's only focus you worry about).
Hi there. I just bought weebill 2..it came with 3 usb cable but I'm not sure how to charge my gimbal. Can you please advise? It's my first time buying a gimbal for my Mirrorless camera. Thank you!
Probably the longest one. But I guess you figured that out already. 😅
@@ChrisSpiegl thanks so much...I was actually able to figure it out. I still appreciate your response!
Thanks for the info ... The EOS RP has only HDMI HDR edition on or off ... unfortunately I have not yet found a solution ...
I checked the manual (linked below). On page 290, you find the setting to choose between the Clean 4k/HD output or if you want the output with info.
But upon reading this info it seems (though I can't test this) that maybe in those modes the camera can not record to card? Not sure. But worth checking out if you may:
gdlp01.c-wss.com/gds/3/0300034173/01/EOS_RP_Advanced_User_Guide_EN.pdf
Hello Chris ... thanks for your support. The camera cannot record in this modes. However, when I put the camera on HDR, it records it, that's interesting. I will try another camera ... maybe I have the live picture on gimbal and camera. (Which camera do you use? I think EOS R, the live image works on gimbal and camera?)
Can you put a external v mount to charge while using?
Probably - if you really wanted to. But that makes the whole set unnecessarily heavy.
@@ChrisSpiegl it’s for a car rig setup, if you have one can you test it out?
@@j_filmz_6130 I understand, but I do not have a V-Mount and can't test it out. But V-Mount can provide all kinds of power from what I know, so you could run USB-C to the Gimbal for powering that and then a Dummy battery for the camera.
@@ChrisSpiegl sweet that’s all I needed to know
I have canon r6 and the s2 gimal
I can not control the record button
I connect the type c to type c cable already
Hi Wei, sorry to hear that, pleas contact the support by the company. They may be able to help you.
@@ChrisSpiegl thanks
problem solved
Need to press the record button harder on the gimbal haha:)
@@WeiK0 Oh that was easy. Great.
@@ChrisSpiegl haha:)
How to connect the camera to the gimbal, to use the gimbal's video button?
sony a7iv vs weebill 2
You'll need to use the appropriate cable. The instructions are probably on the Zhiyun Tech website. They provide a bunch of cables and there should be one USB-C to USB-C to fit with the A7IV.
when I cut my weebill 2 on after like 5 sec it beeps really loud , the white lights turn red and then the whole things shuts off except for the blinking red light....and the only thing that shows on my screen of the weebill is just the logo?????????? can anyone help???
I have not had this happen. There are two thoughts:
- The weight is not balanced and the motors are going crazy and shutting off.
- Or there is something wrong with the weebill.
Please try to balance the gimbal properly and see if that helps. If not, please reach out to Zhiyun Tech support.
when i swipe up it still says image transmitter not found but i have the transmitter, i have the d850.
A few ideas:
- Is the transmitter turned on?
- Is the transmitter connected with the correct cable?
- Is the HDMI port connected to your camera?
- Is your camera outputting an HDMI signal?
Maybe any of these can get you up and running?
CLYDE BROOKS THANK YOU CHRIS SPIEG YOUR CLASS WAS VERY EDUCATIONAL IN HELPING ME
BROCLY MUSIC /D'ETROIT/ New York PRODUCTION
@@clydebrooks3189/videos I appreciate that, thank you Clyde.
Anyone having a vibration issue on underslung mode? Ive auto calibrated and set my mode settings to high using sony fx3 with lens 24-70 Zeiss. However, at times it starts to vibrate I'm not sure what am I doing wrong :/. I even updated the gimbal.
I've had this happen a couple of times. Restarted and calibrated again. When this happens it feels really weird since it's pretty random and erratic. I hope this gets fixed someday in firmware.
@@ChrisSpiegl ohhh wow thank you for responding I think I was going crazy because I keep on doing those check marks recalibrating, checking the balance etc and its getting annoying. I was thinking of repurchasing a new one. However, that may end up with the same issue lol
@@aodvisions I would recommend trying to get a really good balance doing it manually and then using the "digital balancing" just to confirm if it's all ok. If you do this a couple times it's actually quite impressive how balanced you can get the camera.
@@ChrisSpiegl youre referring to the digital balance on the zhiyun app correct?
@@aodvisions I am talking about the balancing check you can do on the display of the Weebill 2 Pro where you see one bar for each motor and how stressed they are.
hi plz help me . attach all cables but gimbal just writed conecting... and did not come video on my gimbal / my camera is a7iii
Do you have the Video Transmission module?
Otherwise, maybe write to the Zhiyun support team?
@@ChrisSpiegl hi dear thanks for your regard .i could fix it i used mistake cable ,
But i have another problem when i press record botton on gimbal, start to focous not recording , and control wheel it doesnt work for nothing , thanks if you could help me about it ,
@@mahbodkh3542 I do not use a Sony camera, so I can't really help you here. I just know that there are some things that work with my Canon EOS R and others do not (focus with RF lenses works, but zoom for example does not because zoom is not electronic).
With the record button: I think there is a function in the camera where you can tell it that pressing the shutter button starts a recording, maybe when you activate that it does trigger recording via the record button on the gimbal.
@@ChrisSpiegl thanks a lot
You got a thumbs up and a sub from me
Thank you, I appreciate that 🌸.
Mine doesn't lock in place to balance. It's so frustrating. I feel so dumb
It does not lock in "all positions". The locking is only in dedicated spots. Maybe that's what was happening for you?
Very confusing on how you actually placed the camera on the plate, especially when your camera recording is faced from the top, and you're using a completely different plate than the one provided in the actual kit.
Why doesn’t it turn on
If you fully charge the gimbal battery but still can't power on, you may need reach out to Zhiyun after-sales service team.
this video was shot on the gimbal: czcams.com/video/CY2wkxN8yIw/video.html
Thank you ... the zhiyun manual is terrible
Thank you, I am glad you found mine informative.