Bending Section, common problems, endoscope repair
Vložit
- čas přidán 7. 09. 2024
- This video shows you what happened to a damaged bending section, why we need to replace it, how to select a good bending section, and common problems we could encounter during installation. LASC supports our clients with replacement parts, scope repair training &technical support, and difficult repairs.
For further information visit our website at
www.lascParts.com
or
www.lascinc.com
Thank you very much. Your Video will improved my knowledge about repairing endoscopes.
Great to know that. Shauni. We are here to help with the scope repairing technicians with the daily questions they have. Please feel free to let us know if you have any other questions.
Shauni Weerasinghe can I have ur what’s app I need some information about repairing
nice thanks. rare and helpfull video!
Pleasure. Please feel free to email us if you have any other questions.
Thank You
Wow nice Details, 🔝🎩!
Thank for the educative video.
I have a pentax colonoscope ec-EC3870fk, when connected to video processor the screen shows a messege:
'scope is not connected'
could it be the ccd or the internal PCBs of endoscope
thank you for advicing
thanks
what causes flexible endoscope to buckle on the umbilical cable on a 190 colonoscope?
The umbilical cord is made of a mono coil covered by a wire braid and has an adhered outer plastic cover. When the minimum bend radius is exceeded, or bent too sharply then on the inside curve, then the wire mesh will bend past the recovery point, and be permanently deform the wire mesh leaving a little pocket where the adhesive is torn away from the mono coil.
The strain relief boot is designed to help prevent this from happening. You will usually see this just off the end of the boot and if gone unchecked can crack the plastic and fluid can enter the scope through there.
A well engineered umbilical can increase the life expectancy. Although to educate the handlers that the best cure is not to let the tube be bent past the point of no recovery.
Why dont they use coil springs?
I want endoscope repairing center
can it be stuk bent in a patient as an accident ?
It can happen although it is rare for a control cable, a collar or a rivet to break in a patient during a procedure due to stress. In most cases, the cable breaks and you lose control in that direction and the doctor will let the scope go loose and safely extract it. The smaller the space the more likely the problem.
vocês oferecem curso de reparo ?
Please email us at lasc.sales@gmail.com for more details