The world needs more dad's like you. I spent every winter(he had winters off) in the garage wrenching with my dad until he passed away when I was 14. He taught me everything I know that I now use to put food on the table and smiles on my kids faces. Now I do the same with my son and daughter as much as possible. Would give anything to spend 5 more minutes working away with him. The hell with anyone who says anything negative about your videos. I guarantee they ignore there kids and buys them thing just to keep them out of their hair.
Thank you Jason for sharing your thoughts and supporting our builds. I'm trying to teach my kid new skills while spending quality time with him. Hopefully it will keep him busy and out of trouble. Have a blessed day and best of luck to you and your family.
Yes sir, we try to build stuff together so that he gets to learn new skills and i get to spend quality time with him. Its a junky go kart but a whole lot of fun to do doughnuts.
The engine is heavily restricted aswell as it had a governor, to get the best out of it they need 2 open the crankcase and remove the governor. Then obvs they could go down the route of tuning, but a free increase in power is to remove the governor
This is an awesome little Kart that you and your boy built TOGETHER! I’ll never forget the time when my dad and I built my go kart together 18 years ago. I still have it and will never sell it just remembering all the great memories I had with him every time I look at it. And it will also teach your son to appreciate it much more than just buying a new kart and giving it to him. Good Work!
I have the same kart it is a jaguar racing kart with a raptor briggs and stratton engine im 50 years old and 3 kids well they are young men now they are in early 20 s over the years i have build and kept their toys a have 4 mini bikes and two karts not for sale i look at them and it reminds me of the good times we had building them good luck and hope you enjoy your toy for years to come good job oh yea put pvc on the back tires and it will drift great have lots of fun
Nice interesting project. The lad is very fortunate to have a Dad like that! We would need get away with driving in the stress in UK. Someone would grass is up to police!
Thanks Ricko for kind words of support. Its sucks that you guys can't ride them on the streets in UK. In our neighborhood nobody cares as long as its not too loud.
+balabay77 Thanks. We run a kart with Honda GX200 with Big bore exhaust and bored out carburetor. We run it on grass so have larger tyres from a quad bike. Great fun as it slides well on grass. Check out Honda GX200 grass kart on CZcams and there are a couple of videos of our kart running. Have fun with your kart and future projects.
Race track sounds fun. We have several tracks in our neck of the woods but i think they want us to rent their karts. We need to find a parking lot to test it out and see how slow it can go.
I am not hating I actually wish I could weld or learn how to so I could do cool stuff like this but me personally would change the steering wheel, again not hating just saying what I would do
your correct, he just flings it into corners.... also did you notice what a waste to put such a slow motor on such a nice chassis like they could of easily put a nice two stroke into it
+DANKIEONPCIN1080P also I think it's a somewhat dangerous setup with the motor on the side where you can easily hit and get burned if it gets hot enough
Torque converter not necessary you just need a heavy duty centrifugal clutch this will make the kart much faster or if you have the width then a 2:1 reduction gearbox
Nice project but it has no safety equipment. Like bars and stuff... But those bars would probably slow the car down. Perhaps you could use rubber instead of iron bars
cool kart,after seeing your son rip it around and his smile,i would say its money well spent. i just posted a video of a manco dingo i picked up cheap and am installing a 16 horse v twin
Hello Roger. its a sweet deal (a steal) for your Dingo. Previous owner probably painted it orange (from a safety standpoint) so that is would stand out and can be seen from far away? Once you finish your kart, it will be a beast. don't forget to buckle up and like others mentioned, maybe do a wheelie bar. Cheers.
Extreme Burnout If the motor is properly kept, it wont. Topped off fluids, clean gas, etc. As long as theirs no knock, and the motor wasnt made in china, the likely hood of an internal failure is highly unlikely.
+RizoProduction most of these motors are made in China, but even the Honda and Briggs motors will still throw rods and break flywheels if you rev them too high without a governor
Very nice good!Cool!Im like!Дорогой брат Евгений приветствую вас снова!Наконец дождался вашего шедевра!Как всегда на высоте!Очень крутой карт!Наверное много времени потребовалось,много средств,И терпения!Но зато результат фееричная:)Очень хочу к вам!Хотя бы на недельку!Я тоже тут мучу кое что!Интересно до какой скорости вваливает этот аппарат?Очень круто,Евгений вы супер!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:)
Спасибо за поддержку и за вдохновительные слова. В этот раз решил схалтурить и даже не красил ни чего. Карт будет использоваться и в хвост и в гриву. Собрал из очередного хлама. Мотор дёшево купил за $100. Мужик который продал его мне, он покупал чтобы тоже собрать карт с сыном но так и не получилось. Вся фигня обошлась в 600 долларов. Может быть тебе удастся приехать к нам, только в нашем колхозе скучно и нечем заняться так вот и собираем всякую хрень. Можно было бы смотаться в сан Франциско по близости а так для развлечения это надо ехать в лос анджелос. Хотел бы посмотреть на твой байк когда собираешь. Сколько у него будет кубиков?
Салам Евгений!Я сам вдохновился как всегда вашими самоделками:)Я сегодня наконец то,завел мой мотор,поменял цилиндр,поршень,кольца:)))Сейчас планирую сварить раму и купить заднюю ось,от квадроцикла 150кубового!Так вот я Цилиндр поставил от 150куб!Все подготовлю и сниму видео сборки,лично для вас!:)))Ну на счет приезда,мечтаю вас поведать.Город Сакроменто посмотреть,почувствовать вашу атмосферу.С вами Евгений пообщаться,пожать вам руку,обнять как родного брата:)Ну привезти сувенирчики от нас подарки! Пока соберу свой байк,к этому времени думаю куплю GO PRO!
+Талгат Урбанов Если бы ты к нам приехал, мы бы тебя прокатили по нашей сельской местности. Было бы интересно посмотреть на твой трайк. Успехов тебе с установкой мотора и со сборкой байка. Будем ждать ролика.
Luis Cruz This rolling chassis already had MCP master cylinder and caliper on it. We just installed new nylon 3/16 tubing and bleed the brakes. These brakes are readily available on eBay and Amazon. Good luck buddy.
Its all good. School is out and many kids are trolling my videos. No hard feelings. Bottom line is my videos are being watched and thats all that matters.
Project DIY Any chain will stretch over time and will need to be replaced. I usually buy a box of 10ft roller chain under $20 and that should be plenty, enough for 3 replacements. As far as I know go kart racing teams use #35 chain and many of their clutches are set up for that chain. I do prefer #40/41 chain because it got higher tensile strength but I guess to each its own. Thanks for watching.
just a suggestion and I am not at all trying to be "that one guy" but you use a file and go back and forth it dulls the teeth on the file so go forward pull up go back and push down then forward and repeat
+Matt Dimaline any engine will blow up if you push it too hard same thing with that engine if you take the governor off and you don't beat on it you'll be fine
+Hunt 1229 well it pretty much is a cold air intake because the go-kart does not have an engine bay where Heat can gather up and the best you can do is mod the carburetor and put a different filter on it
do i need to use a torque converter cant i use just a clutch? and everyone says use a 10 tooth clutch with a 60 tooth sprocket? is that more torques then a 14 tooth ?
you need to teach him don't let off of the gas in the middle of a semi donut because you just stop. and also tell him when he Initiates the donut don't jerk the wheel and floor it teach him how to use the weight to initiate a donut also :) other than that he's great.
+balabay77 sorry I didn't realize I was being so demanding, teach him this, teach him that. I didn't wanna make it seem that way I'm so sorry. and he is great with power tools
Pine Films Это сцепление можно купить на EBay rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263233888551 Приблизительно они все одинаковые только нужно знать точный размер моторного вала. Они могут быть 3/4 дюйма или 1’ дюйм. Эти вариаторы ещё продают на Амазоне и на многих других сайтах. Набор называется 30 series torque converter. Удачи и спасибо за просмотр нашего ролика.
a little trick i like to do when i race street is when im in my go kart and i really like to drift so i put long lasting tape around the wheels and it causes it so i can drift and take off faster
Total cost was 600 dollars and as you can see, the rolling chassis was purchased from another person who didn't want it anymore. To build a frame from scratch its just too much hassle. You can find many parts on Ebay or Amazon for your project. Good luck
Make a offroad go kart and put a predator 420cc on it btw it has electric start and it's a good engine my cousin has the same honda engine for his post pounder and the pull start wrecked and it is currently replaced with a shoe lace lol but you probaly take better care of stuff then he does
Hello Kade We used to have a Yerf Dog go kart before. It was a two seater and it was too bulky to fit in our van so we sold it. It was a heavy kart as well so for now we like to goof off on our mini bikes tearing up the trails. Thanks bud. 👍
No sir, we haven't tweaked the motor yet. I bet if we remove the governor, re-jet the carb and get a different air filter then it might add couple of horses to this kart.
+balabay77 you have to be careful with the governor, with the high rpms it can crack the rod in half and if your flywheel is plastic it will destroy itself from the high rpms. If you do end up removing the governor I recommend a Billet flywheel and rod so your engine won't end up breaking. oh and you should make a exhaust pipe (straight pipe) from steel tubing. Nice job on the go kart by the way, I like it very much. Keep up the good work.
Hola, soy de ECUADOR me puede ayudar con un contacto para ubicar y realizar la compra de piezas para el karting como es, aros, llantas, asiento y el convertidor de torsión, desde ya mis agradecimiento...GRACIAS
I was thinking about that LOL. Many people also recommend taking out the governor and rejeting the carb as well. As soon as i finish my current project that I'm working on, then i will mess with this kart. Cheers
There's another dipstick at the front of the engine. This engine had 2 of them which serve the same purpose but the one in the back of the engine usually rarely used.
not for slinging it around jackass thats more of a high end power advantage so you get going faster a little and hes not going fast enough to make differece
Dude there's a reason why they put the governor on the engine. If you run it to hard, you will bend the engine's vowels and possibly blow the engine and replacing the engine.
I have a go cart and it was basically just a chassis wheel steering wheel and all that regular stuff on a chassis. me my dad threw a motor on it spray-painted it into the top so at about 40 and I think it has like 12 hp and the motor is a racing motor
I found used engine on Craigslist For $100. Person who sold it to me was going to use it for his project but never got around to it. Thanks for commenting and watching. Cheers
+Angel “DelOroProductions” Gutierrez You know, I'm not sure because it doesn't say how many cc's. If it's identical to harbor freight motor then it's probably anywhere between 301 to 346cc.
thats a nice lookin kart, but dont u sometimes catch yourself on that exuast ? i have the same 9hp engine in my kart/buggy and im thinkin of takin the governer out...have you took it out this engine ? you can also get kits for these engines and put proper exuasts and and decent air filters on which i may get for mine.
I tell my kid to keep both hands on the steering wheel to avoid burns. I will get another exhaust for it. So far we haven't done anything to it yet. We need to remove the governor, re-jet the carb and get another air filter for it. Racing kits are kind of pricey so for now we will do inexpensive stuff to it first. Maybe in the near future i'll look for better quality flywheel, rockers, springs and another carb. Cheers.
balabay77 hello I want to say that his invention are the best and his video is also from Colombia and almiro as you do that car and another invention I want to give me a car that can be so sir
Lucky kid for being able to build and play with such an awesome machine at a young age. Hope he brings his passion as he grows up.
The world needs more dad's like you. I spent every winter(he had winters off) in the garage wrenching with my dad until he passed away when I was 14. He taught me everything I know that I now use to put food on the table and smiles on my kids faces. Now I do the same with my son and daughter as much as possible. Would give anything to spend 5 more minutes working away with him. The hell with anyone who says anything negative about your videos. I guarantee they ignore there kids and buys them thing just to keep them out of their hair.
Thank you Jason for sharing your thoughts and supporting our builds. I'm trying to teach my kid new skills while spending quality time with him. Hopefully it will keep him busy and out of trouble. Have a blessed day and best of luck to you and your family.
It's awesome that your son is involved in these projects, way to go, nice go kart.
Yes sir, we try to build stuff together so that he gets to learn new skills and i get to spend quality time with him. Its a junky go kart but a whole lot of fun to do doughnuts.
balabay77 I wish my dad was like you. Your son is very lucky.
That engine looks like a monster compared to the frame
I just finished my 212cc go kart with a torque converter, tops out at around 40 so I can't imagine an 9hp
Tone Loc Baca This one does go 40... The rear sprocket is too big that's why.
The engine is heavily restricted aswell as it had a governor, to get the best out of it they need 2 open the crankcase and remove the governor. Then obvs they could go down the route of tuning, but a free increase in power is to remove the governor
This is an awesome little Kart that you and your boy built TOGETHER! I’ll never forget the time when my dad and I built my go kart together 18 years ago. I still have it and will never sell it just remembering all the great memories I had with him every time I look at it. And it will also teach your son to appreciate it much more than just buying a new kart and giving it to him. Good Work!
That's awesome! Nice job. You should try airing out the tires and putting PVC tubes over the rear tires like the drift trike guys do.
Removing the governor would make it hilariously fun! Great builds keep them up!
Thanks for your advice and support. We look forward to making new junk builds soon.
Moves pretty good! Great project and excellent job getting the kid involved...Thx for the vid!
rob lipiec
Sure thing Rob and thanks for watching our video. Cheers mate.
Very Nice! I'm putting a Hond gx240 on a kart right now, lots of fab work with frame and seat modifications to get it to work, almost done.
I have the same kart it is a jaguar racing kart with a raptor briggs and stratton engine im 50 years old and 3 kids well they are young men now they are in early 20 s over the years i have build and kept their toys a have 4 mini bikes and two karts not for sale i look at them and it reminds me of the good times we had building them good luck and hope you enjoy your toy for years to come good job oh yea put pvc on the back tires and it will drift great have lots of fun
Thanks for sharing your thoughts and memories of the good old times. Appreciate your advice on PVC pipe. As soon as i find some, i will try it. Cheers
Nice build, the only time I've ever touched a go cart i flipped it. Looks like yours is much lower to the ground, much harder to flip.
AHHH!! SO JEALOUS!!!!!!!!!
Nice interesting project. The lad is very fortunate to have a Dad like that! We would need get away with driving in the stress in UK. Someone would grass is up to police!
Thanks Ricko for kind words of support. Its sucks that you guys can't ride them on the streets in UK. In our neighborhood nobody cares as long as its not too loud.
+balabay77
Thanks. We run a kart with Honda GX200 with Big bore exhaust and bored out carburetor. We run it on grass so have larger tyres from a quad bike. Great fun as it slides well on grass. Check out Honda GX200 grass kart on CZcams and there are a couple of videos of our kart running. Have fun with your kart and future projects.
6:00 watching cvt wind up, mesmerizing.
You know it be more fill efficient and a little faster if you put an aftermarket racing air filter right?
Yea that looks like a lot of fun , I have one like this but I race them on an asphalt track.
Race track sounds fun. We have several tracks in our neck of the woods but i think they want us to rent their karts. We need to find a parking lot to test it out and see how slow it can go.
+balabay77 I'm on CZcams my channel is Rcmaster199 if you want to see the track and my kart
I am not hating I actually wish I could weld or learn how to so I could do cool stuff like this but me personally would change the steering wheel, again not hating just saying what I would do
This machine has more HP than my chinese scooter for real now.
I might be wrong but I don't think that's really drifting cuz he's just using the weight of the engine to whip him around
your correct, he just flings it into corners.... also did you notice what a waste to put such a slow motor on such a nice chassis like they could of easily put a nice two stroke into it
Yeah its not
+DANKIEONPCIN1080P also I think it's a somewhat dangerous setup with the motor on the side where you can easily hit and get burned if it gets hot enough
+Brad thats the point of go karts...
That's where the motor is supposed to go on race kart frames.
Torque converter not necessary you just need a heavy duty centrifugal clutch this will make the kart much faster or if you have the width then a 2:1 reduction gearbox
Nice project but it has no safety equipment. Like bars and stuff... But those bars would probably slow the car down. Perhaps you could use rubber instead of iron bars
These racing go karts are low to the ground therefore its much harder to flip it. Although I'm sure its possible.
Amazing but don't forget to remove the governor from the motor or find some way to disable it so you can get max speed and power out of the engine!
We will do that soon. Cheers
I love watching cvts in motion.
This is fantastic! Great Job! Great Dad!
Thanks Marcos for your support.
cool kart,after seeing your son rip it around and his smile,i would say its money well spent. i just posted a video of a manco dingo i picked up cheap and am installing a 16 horse v twin
Hello Roger.
its a sweet deal (a steal) for your Dingo. Previous owner probably painted it orange (from a safety standpoint) so that is would stand out and can be seen from far away? Once you finish your kart, it will be a beast. don't forget to buckle up and like others mentioned, maybe do a wheelie bar. Cheers.
Did you take the governor out of the engine? Removing it will allow the motor to go up to full throttle and a much higher RPM producing more power.
also giving it a higher chance of blowing up.
Extreme Burnout If the motor is properly kept, it wont. Topped off fluids, clean gas, etc. As long as theirs no knock, and the motor wasnt made in china, the likely hood of an internal failure is highly unlikely.
+RizoProduction also ruins the warranty.
+RizoProduction most of these motors are made in China, but even the Honda and Briggs motors will still throw rods and break flywheels if you rev them too high without a governor
+Barns Noble is there a way to modify the governor?
to get more top rpm but with a limit?
It’s a nice kart for a project but doesn’t compete with Leopards or Rotaxs. Effectively you’ve made a lightened hire kart
Very nice good!Cool!Im like!Дорогой брат Евгений приветствую вас снова!Наконец дождался вашего шедевра!Как всегда на высоте!Очень крутой карт!Наверное много времени потребовалось,много средств,И терпения!Но зато результат фееричная:)Очень хочу к вам!Хотя бы на недельку!Я тоже тут мучу кое что!Интересно до какой скорости вваливает этот аппарат?Очень круто,Евгений вы супер!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:)
Спасибо за поддержку и за вдохновительные слова. В этот раз решил схалтурить и даже не красил ни чего. Карт будет использоваться и в хвост и в гриву. Собрал из очередного хлама. Мотор дёшево купил за $100. Мужик который продал его мне, он покупал чтобы тоже собрать карт с сыном но так и не получилось. Вся фигня обошлась в 600 долларов. Может быть тебе удастся приехать к нам, только в нашем колхозе скучно и нечем заняться так вот и собираем всякую хрень. Можно было бы смотаться в сан Франциско по близости а так для развлечения это надо ехать в лос анджелос. Хотел бы посмотреть на твой байк когда собираешь. Сколько у него будет кубиков?
Мы ещё не пробовали его раскочегарить на всю скорость но я думаю карт поедет в приделах 70-75 км в час.
Салам Евгений!Я сам вдохновился как всегда вашими самоделками:)Я сегодня наконец то,завел мой мотор,поменял цилиндр,поршень,кольца:)))Сейчас планирую сварить раму и купить заднюю ось,от квадроцикла 150кубового!Так вот я Цилиндр поставил от 150куб!Все подготовлю и сниму видео сборки,лично для вас!:)))Ну на счет приезда,мечтаю вас поведать.Город Сакроменто посмотреть,почувствовать вашу атмосферу.С вами Евгений пообщаться,пожать вам руку,обнять как родного брата:)Ну привезти сувенирчики от нас подарки!
Пока соберу свой байк,к этому времени думаю куплю GO PRO!
+Талгат Урбанов
Если бы ты к нам приехал, мы бы тебя прокатили по нашей сельской местности. Было бы интересно посмотреть на твой трайк. Успехов тебе с установкой мотора и со сборкой байка. Будем ждать ролика.
Omg epic a cvt gokart
Mine is a 14:1 to keep the engine from stalling, max rpm 11000, so I get a high speed from that still
Great project guys, awesome Kart too, nice one.......
this go-kart looks good
Glad you liked it. Thanks for watching.
Nice work on the kart sir. I bet the young fella loves it.👍
Yes sir he likes it. thanks for checking out my video.
+balabay77 no worries.
AWESOMENESS
Nice driving Cody
very good video but my question is this what kinda hydraulic brakes did u put on?
Luis Cruz
This rolling chassis already had MCP master cylinder and caliper on it. We just installed new nylon 3/16 tubing and bleed the brakes. These brakes are readily available on eBay and Amazon. Good luck buddy.
Really cool go-kart to drive
This is a really cool video. I liked it, I just posted a go kart video too. 40 mph!. I wish that I had these types of projects when I was a kid.
Pretty Cool!Cant believe how many people wanna talk Crap.Alot of Haters out there.
Its all good. School is out and many kids are trolling my videos. No hard feelings. Bottom line is my videos are being watched and thats all that matters.
+balabay77 thats cool people gonna hate just dont let anyone's comments discourage you
+Jason Phillips
I can't please everyone in this world so I'm not even going to try. Thanks for your support Jason. Have a blessed day.
How has 35 Chain held up? I heard it can't last long with the power of a 9hp engine.
Project DIY
Any chain will stretch over time and will need to be replaced. I usually buy a box of 10ft roller chain under $20 and that should be plenty, enough for 3 replacements. As far as I know go kart racing teams use #35 chain and many of their clutches are set up for that chain. I do prefer #40/41 chain because it got higher tensile strength but I guess to each its own. Thanks for watching.
nice one.. I like the work...
Idubbbz content cop song is the intro lol
Love it
money shot
Thank you for sharing the video.. Nice work.. :-)
I'm glad you liked it. Thanks for viewing our video. Cheers
Parag Pudke Gh
9HP… 270cc… V-belt CVT… I think that this Go-Kart is so fast.
瓢六堂 hyourokudou lmao that ain’t fast have you seen the 230 hp go kart
Yoickson yeah cause it has a whole damn streetbike motor in it haha get a clue
that thing has got some speed
Awesome build
Glad you liked it. 👍
just a suggestion and I am not at all trying to be "that one guy" but you use a file and go back and forth it dulls the teeth on the file so go forward pull up go back and push down then forward and repeat
you should take the governor off that thing it'd be even more fun LOL
Fun until it blows up🔥🔥🔥
+Matt Dimaline any engine will blow up if you push it too hard same thing with that engine if you take the governor off and you don't beat on it you'll be fine
Add a cold air intake
+Hunt 1229 well it pretty much is a cold air intake because the go-kart does not have an engine bay where Heat can gather up and the best you can do is mod the carburetor and put a different filter on it
Dude, put a chain guard on that. I knew a guy that had his jaw ripped off by a flying chain on one of these carts.
Thanks Brian for your suggestion. i will make a chain guard. Cheers
nagyon jo volt gratulálok
do i need to use a torque converter cant i use just a clutch? and everyone says use a 10 tooth clutch with a 60 tooth sprocket? is that more torques then a 14 tooth ?
That kid drives like a pro.
you need to teach him don't let off of the gas in the middle of a semi donut because you just stop. and also tell him when he Initiates the donut don't jerk the wheel and floor it teach him how to use the weight to initiate a donut also :) other than that he's great.
Thanks for your advice Cj. He will try your technique tonight. Cheers
+balabay77 sorry I didn't realize I was being so demanding, teach him this, teach him that. I didn't wanna make it seem that way I'm so sorry. and he is great with power tools
+Cj Perlotto
It's all good buddy, no worries. Thanks for your support and thumbs up for watching our video.
Good job blabby77! Can I get a complete plan for this cart together with list of parts and specs? Thanks.
There is a vin tag behind the seat on the frame
Really cool I wish my dad did this
Maybe its still not too late to build something with your dad.
+balabay77 True the thing I only builded with my dad was a robot but nice video have a great day
+Brandon Pineda
You too buddy. Take care.
Где приобретали комплект дискового сцепления (с ремнем)? Поделитесь ссылкой? Where did you get the disk clutch? (with belt). Give a link.
Pine Films
Это сцепление можно купить на EBay rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263233888551
Приблизительно они все одинаковые только нужно знать точный размер моторного вала. Они могут быть 3/4 дюйма или 1’ дюйм. Эти вариаторы ещё продают на Амазоне и на многих других сайтах. Набор называется 30 series torque converter. Удачи и спасибо за просмотр нашего ролика.
did u cut oil cover ? how will u gonna put in oil ? i think u blocked to oil cover.
a little trick i like to do when i race street is when im in my go kart and i really like to drift so i put long lasting tape around the wheels and it causes it so i can drift and take off faster
Thanks for the tip. we need to try that sometimes.
I do that all the time
I got pvc on my wheels now I can drift better
how much was the total cost? and if possible could you list the parts used, or is there a plan?
Total cost was 600 dollars and as you can see, the rolling chassis was purchased from another person who didn't want it anymore. To build a frame from scratch its just too much hassle. You can find many parts on Ebay or Amazon for your project. Good luck
A lot off mods to fit the torque converter cut and drill and the frame might be a invader
nice! its cool having a go kart huh?
nice video, is the governor still in the motor?
Yes, we need to remove it. Here's a video of us trying to get top speed. czcams.com/video/JddSC7qaK2U/video.html
Make a offroad go kart and put a predator 420cc on it btw it has electric start and it's a good engine my cousin has the same honda engine for his post pounder and the pull start wrecked and it is currently replaced with a shoe lace lol but you probaly take better care of stuff then he does
Hello Kade
We used to have a Yerf Dog go kart before. It was a two seater and it was too bulky to fit in our van so we sold it. It was a heavy kart as well so for now we like to goof off on our mini bikes tearing up the trails. Thanks bud. 👍
+Kade Spade
Ask him if you can make a video about his rhino and upload it to your channel. I would love to check it out. Cheers.
Ill try my best with it
+Kade Spade
Ok cool.
ytuff GJ jdlfdiir the first to 5 the
That thig halls down the street pretty good, has the governor been removed?
No sir, we haven't tweaked the motor yet. I bet if we remove the governor, re-jet the carb and get a different air filter then it might add couple of horses to this kart.
balabay77 Now that is what i'm wanting to see.!
+balabay77 you have to be careful with the governor, with the high rpms it can crack the rod in half and if your flywheel is plastic it will destroy itself from the high rpms. If you do end up removing the governor I recommend a Billet flywheel and rod so your engine won't end up breaking. oh and you should make a exhaust pipe (straight pipe) from steel tubing. Nice job on the go kart by the way, I like it very much. Keep up the good work.
Thanks Anthony for the info. i will keep that in mind when we decide to make it faster.
It looks like a EMMICK frame!
Trell Atkins
Thanks buddy for the info. Appreciate it.
Also for drifting make the gear ratio less top speed but more torque
OK buddy i will.
very nice video i have a mini bike myself
Thanks David. Upload your mini bike video, I'm sure other people would like to check it out.
Good build best on
nice project man
Hola, soy de ECUADOR me puede ayudar con un contacto para ubicar y realizar la compra de piezas para el karting como es, aros, llantas, asiento y el convertidor de torsión, desde ya mis agradecimiento...GRACIAS
I feel like it needs a protective plate of like plastic to protect your kid from the motors heat
Thanks for the tip. I will make something to protect him from exhaust. Cheers
great cart champ.
Thank you buddy and thanks for checking out my videos. Viewers like you inspire us to make more build projects. Cheers
yea..
You should put on a air intake & exhaust kit.
I was thinking about that LOL. Many people also recommend taking out the governor and rejeting the carb as well. As soon as i finish my current project that I'm working on, then i will mess with this kart. Cheers
I took that engine apart and rebuilt it its a decent engine for a project like this
Its good enough to goof off on empty parking lots. Cheers
aha right said
good job , very good ! ☺
Thank you sir. Cheers
Gonna have to rejet carbs new intake exhaust and remove governor but apart from that nice kart
Thanks for the info. Cheers
Como se cambiará el aceite si le contaste el tapón arras del Carter
How are you going to change the oil now that you grinded the cap screw to a flat piece of plastic
There's another dipstick at the front of the engine.
This engine had 2 of them which serve the same purpose but the one in the back of the engine usually rarely used.
Where do you get your brake pads from ?
I like the go kart
cool project i like it
Nice job man!
Thank you sir. Glad you liked it.
To make it faster remove the governor from the engine.
not for slinging it around jackass thats more of a high end power advantage so you get going faster a little and hes not going fast enough to make differece
dude chill the fuck out its just a suggestion, u don't have to be a bitch about it..
+Alpha smurf dumbass
Dude there's a reason why they put the governor on the engine. If you run it to hard, you will bend the engine's vowels and possibly blow the engine and replacing the engine.
+Major Luck thx
I believe that’s a phantom racing chassis
Where did you buy that seat for 80$ at?
Very nice work ! Keep it up i like your projects :)
eros20V
Thank you sir. Glad you like our projects and appreciate your support.
"Craigslist" the shadiest website on the planet
i bought my home on craigs list, and i got a good deal.
+Carl myers sr nice box house. great steal .
I have a go cart and it was basically just a chassis wheel steering wheel and all that regular stuff on a chassis. me my dad threw a motor on it spray-painted it into the top so at about 40 and I think it has like 12 hp and the motor is a racing motor
Sweet kart
Where did you get that engine man I love the way the project turned out and props to you guys
I found used engine on Craigslist For $100. Person who sold it to me was going to use it for his project but never got around to it. Thanks for commenting and watching. Cheers
+balabay77 and how many cc is it because it looks like it can pull and drift
+Angel “DelOroProductions” Gutierrez
You know, I'm not sure because it doesn't say how many cc's. If it's identical to harbor freight motor then it's probably anywhere between 301 to 346cc.
thats a nice lookin kart, but dont u sometimes catch yourself on that exuast ? i have the same 9hp engine in my kart/buggy and im thinkin of takin the governer out...have you took it out this engine ? you can also get kits for these engines and put proper exuasts and and decent air filters on which i may get for mine.
I do on my and it freaking hurts lmao sucks
I tell my kid to keep both hands on the steering wheel to avoid burns. I will get another exhaust for it. So far we haven't done anything to it yet. We need to remove the governor, re-jet the carb and get another air filter for it. Racing kits are kind of pricey so for now we will do inexpensive stuff to it first. Maybe in the near future i'll look for better quality flywheel, rockers, springs and another carb. Cheers.
+balabay77 still happens when your sliding around lol I had hot branded on me for like a week
Beset Chanel ever !
Nice Job
Thanks buddy, glad you liked it.
balabay77
hello I want to say that his invention are the best and his video is also from Colombia and almiro as you do that car and another invention I want to give me a car that can be so sir
Your a cool dad!!
Thanks for your support. Cheers
buy some PVC pipe and put over the back tires help it drift a lot better
Thanks for the tip. I'll have to try that.
+balabay77 make sure u measure the tires on with and height
+Nick Breen and question what's ur plan to get the oil plug out when u need to change the oil
+Nick Breen
I've cut the rear plug but the front dipstick plug is still there to do the oil change. At 1:37 you can see both.
Ah
Where did you find the set of the hydraulic brakes
Ighhh Weyyy
You can find brakes on eBay
наши люди в Голливуде 10:00 "попа зажарилась" haha :)
How did you mount the sprocket on the outside of the torque converter
I used C clips or also known as retaining rings to hold the sprocket in place. They work just as good.
+balabay77 I would love to see a close up of that set up