Best video on CZcams on how to use and fix the Juki needle threader. Thank you for taking the time to share your knowledge. My threader now works like a lucky charm.
Thank you so much for posting this guide! I was on the verge of tears, banging my head against the table, trying to figure out this feature of my brand new Juki. Turns out the tiny metal piece in the middle of my threader was not centered... a tiny adjustment with my scissors and I was FINALLY in business! Thank you. Very clear and helpful.
Oh my gosh you are wonderful!!! I have been living without this threader working for so long! I even asked the guy at the sewing center if he could fix it and he said he didnt think so!.... thank you so much!!! Your video was so easy to understand and I fixed my threader! I was scared to pop off the hook because you didn't show how to do that part, but I just bit the bullet and did it and it works now!!!!
Thank you. I fixed my needle threader after watching this. I used a magnifying glass to see where the hook was landing and it was missing the needle. So glad to have it working again.
I have been looking for an explanation on how to get my threader to work, just viewed this video and immediately followed your directions, now my threader is working again, Thank You so much, can't tell you how much you've helped me
For the longest time I just thought the Juki didn't have a very good needle threader then I found it just needed to be adjusted. Really funny. Glad we could help you.
Thank you so very much. My threader stopped working suddenly and I have been searching around the internet for about a week trying to find a solution. You are the first to even mention that tiny stylus in between the two metal prongs, and the fact that you can pop off the threader to examine it. So I was finally able to fix it. Many many thanks.
My needle broke while sewing, an must have bent the needle threader. I had no idea I could pop off the threader. I put it under a magnifying glass and saw what you were explaining. THANK YOU!!! Very helpful. I was able to bend it back to the proper placement and works like a charm!
OMG thank you! Took off the threader and found that the metal piece in the middle was not centered. Gently pushed it into the center. I won't repeat what I was calling that part. lol It works! YA
I don't think that the thread is supposed to go behind that one guide right by the area that tells you what kind of needle it uses - I think it is supposed to go through it.
I found on my machine that the hook was never getting in the eye. Use a magnifying glass or something to check if that thread hook needs to be bent so it will travel through the eye. Usually I just thread it and don't use the threader but it should work if adjusted properly.
Serious question- how in the world is this easier than just threading the needle myself? Seems like I could either twist it around several teeny tiny things or pull it through one tiny hole- the one hole is much simpler. If I just skip this step altogether since it's maddeningly frustrating and simply thread the need myself, is it going to cause problems with the rest of the threading?
It has been a long time since we did this video but I don't think that this was ever easier. We just wondered how it it was supposed to work because it never seemed to work. I usually just thread the needle without the threader.
Thank you! I just purchased my machine brand new. COULD NOT get the threader to work and thought operator error. After watching your demo, I found the tiny hook that grabs the thread is bent. Any thoughts on how I can repair myself? OR I may start searching for replacement piece and may have to make the LONG drive back to the shop to see if they can fix it. =(
Threading a Juki is NOT easy! It’s a wonderful machine but their threader sucks. After 4 years of owning it, I gave up on the feature.The Bablock has an easy threader.
Best video on CZcams on how to use and fix the Juki needle threader. Thank you for taking the time to share your knowledge. My threader now works like a lucky charm.
Thank you very much! Planned call and send machine back!
Thanks for the video. So glad to have found this.
Thank you so much for posting this guide! I was on the verge of tears, banging my head against the table, trying to figure out this feature of my brand new Juki. Turns out the tiny metal piece in the middle of my threader was not centered... a tiny adjustment with my scissors and I was FINALLY in business! Thank you. Very clear and helpful.
Oh my gosh you are wonderful!!! I have been living without this threader working for so long! I even asked the guy at the sewing center if he could fix it and he said he didnt think so!.... thank you so much!!! Your video was so easy to understand and I fixed my threader! I was scared to pop off the hook because you didn't show how to do that part, but I just bit the bullet and did it and it works now!!!!
Thank you. I fixed my needle threader after watching this. I used a magnifying glass to see where the hook was landing and it was missing the needle. So glad to have it working again.
I have been looking for an explanation on how to get my threader to work, just viewed this video and immediately followed your directions, now my threader is working again, Thank You so much, can't tell you how much you've helped me
Glad to help. Sometimes I would think what am I doing wrong and all the time the little hook wasn't even close to the eye of the needle!
For the longest time I just thought the Juki didn't have a very good needle threader then I found it just needed to be adjusted. Really funny. Glad we could help you.
Was feeling very frustrated with my needle threader not working and I happened upon this video and it helped me so very much. Thank you for sharing!
Спасибо огромное! Я благодаря вашему видео исправила свой нитевдеватель! Я 😃
Thank you so very much. My threader stopped working suddenly and I have been searching around the internet for about a week trying to find a solution. You are the first to even mention that tiny stylus in between the two metal prongs, and the fact that you can pop off the threader to examine it. So I was finally able to fix it. Many many thanks.
My needle broke while sewing, an must have bent the needle threader. I had no idea I could pop off the threader. I put it under a magnifying glass and saw what you were explaining. THANK YOU!!! Very helpful. I was able to bend it back to the proper placement and works like a charm!
You are the best!!!! Mine was not working since I got it and I just kept thinking I was doing it wrong. Thank you!
Glad to help
Thank you! The diagram in the manual is confusing but thanks to you I got it to work on the second try.
You are a prince, thank you. I was so frustrated not realizing the center piece was simply bent.
Took the needle threader off and adjusted wire. Works now. Thankyou
OMG thank you! Took off the threader and found that the metal piece in the middle was not centered. Gently pushed it into the center. I won't repeat what I was calling that part. lol It works! YA
I don't think that the thread is supposed to go behind that one guide right by the area that tells you what kind of needle it uses - I think it is supposed to go through it.
Awesome, you are so patient. You did a great job explaining. It worked the first time for me. Thank you!!!
I have never been able to get this to work
I found on my machine that the hook was never getting in the eye. Use a magnifying glass or something to check if that thread hook needs to be bent so it will travel through the eye. Usually I just thread it and don't use the threader but it should work if adjusted properly.
Way to go! Weird how you have to use that threader but it is nice when it works.
It would have been nice to see the actual hardware before you popped it back on.
What hardware? Not sure what you want clarified. I can take a pic for you if you let me know what trouble you are having.
Serious question- how in the world is this easier than just threading the needle myself? Seems like I could either twist it around several teeny tiny things or pull it through one tiny hole- the one hole is much simpler. If I just skip this step altogether since it's maddeningly frustrating and simply thread the need myself, is it going to cause problems with the rest of the threading?
It has been a long time since we did this video but I don't think that this was ever easier. We just wondered how it it was supposed to work because it never seemed to work. I usually just thread the needle without the threader.
I'm old and find it impossible to manually thread a sewing machine needle these days.
It does take a little practice. When you aren't worrying about filming it, using the needle threader is a lot easier.
And finding bobbins is another problem
Thank you! I just purchased my machine brand new. COULD NOT get the threader to work and thought operator error. After watching your demo, I found the tiny hook that grabs the thread is bent. Any thoughts on how I can repair myself? OR I may start searching for replacement piece and may have to make the LONG drive back to the shop to see if they can fix it. =(
How do you get it adjusted?
It looks very complicated to wind the thread around the threader.
Threading a Juki is NOT easy! It’s a wonderful machine but their threader sucks. After 4 years of owning it, I gave up on the feature.The Bablock has an easy threader.