MN82 LC79 Land Cruiser gets the Ascent 18 wheels and tires and a rear end lift
Vložit
- čas přidán 26. 08. 2024
- In this Video I do some Minor upgrades to the MN82 Land Cruiser with a rear lift and I use the Ascent 18 wheels and tires to give it better traction. Enjoy the Video and Dont forget to hit that Like Button and Subscribe.
If you want to get your own MN82 or anything that was used in this Video click on the Links below they are Affiliate Links and they do help the Channel
MN82 LandCruiser:
amzn.to/3y9qzfZ
5mm to 7mm Wheel Hex Adapters:
amzn.to/3y86RRT
Nice video and thanks for the tips to lift the rear. Just subbed.
👍. Am loving this truck, already modifying it. So far so good.
Thank you for the sub and no problem
Nice I was looking at this truck on Ali for 27 bucks. But I have to many projects going to start another one right now
Nice can't wait to see what ur working on
Tbh grab it and use the money you saved to get one of the 3dprinted rear beds, ill look the balls and work without much effort :)
Did you need hex adapters to mount the wheels?
@@kevincasey6876 yes I did and these are the ones that I got
amzn.to/3AOumQZ
Hi, when mouting the leaf springs on top of the axle, did you have issues with your driveshaft slowing the motor down due to it compressing all the way? I did the same mod on mine and it seems that it doesn't spin as freely when the rear axle is compressed.
Also, did you do any mods to the front springs to soften it?
I will double check the rear but I don't think I had any slowing down or binding the front shocks I did nothing to them
hi nice mode. Can you tell me the model of the wheel and tires that you use.
@dhecel544 the wheels and tires that I'm using on this model are from the Redcat Ascent18
@@rccargarage thanks
@dhecel544 your welcome