Master The Art Of Brake Bleeding With These Easy Steps!

Master The Art Of Brake Bleeding: A How-to Guide! We bleed the brakes on our Ford using a hack from Chris Fix. Does it work? Revitalize Your Ride: The Ultimate Guide To Bleeding Brakes!
Episode 248 Manic Mechanic
Parts:
DYNAMIC FRICTION 35554027 Ford Maverick MANAUL Disc Brake Master Cylinder
PV2 combination valve
www.amazon.com...
Get the Correct Master Cylinder for Your Car
• Get the Correct Master...
Manual Master Cylinder Push Rod Kit Replacement for Ford 1964-1973
www.amazon.com...
Prevent Toxic Exhaust Fumes In Your Cab With This Brake Booster Push Rod Hack!
• Prevent Toxic Exhaust ...
[e-mail]
Insta: @autorestomod
www.patreon.com/gasolinemedia
Sponsors:
www.autokrafters.com

[@ronbelldvm]

Nice tip. thanks for sharing.

[@hermesrios5341]

I have found that if you set the bottle higher than the bleeder it works even better. ( the air traped in the hose can't make it back into the cilinder/caliper)

[@GeekGinger]

I'm old so I was taught to use that method with a Coke bottle. The narrow neck kept the hose in place and the glass meant it was heavier and less likely to fall over since the cap obviously couldn't be reused. Later I went to Gatorade glass bottles, since the bigger, wider bottle meant that it had no chance of tipping over.

[@roberteast4160]

I still use a coke bottle today works great.

[@user-jm9qw5wx4s]

Thank you!

[@johnbarker5009]

That's a great tip with the grease around the bleed screws. Sure, go ahead and show us the RSS stuff. They make really nice products and deserve the exposure. If I were in the market for an aftermarket suspension I'd MUCH rather use RSS than put in an MII system, even though that's the go to for the street rod world.

[@yurishnirman3847]

dont actually need to fill the bottle if you put the bottle higher than the nipple so that fluid is pushed up. There is also neat auto bleed nipples you can use or one way valve.

[@domfer2540]

Good points.. I like the vacuum gun. I use a water bottle with the vacuum gun. I do not open and close the fitting. I just pump the fluid out and I can do all 4 wheels in about 1/2 hour.

[@Meche697]

The harbor freight compressed air gizmo works a treat and is worth the $. I did 4 over the weekend so it saved me a lot of headache. 2nd year of use for my vehicles.

[@brunojuarez8140]

Cool, 1972 Continental Mark IV used for an example on where to start bleeding. Where'd you get that little graphic?

[@slick-px4pq]

Sometimes if don't have a helper, I'll use this method except for the pumping and just let it gravity bleed while I do something else