Can you direct how to set up a counter post" This is exactly what I have been trying to figure out. How to get both sides to be exact meet, if i eyeball it im always off. This is perfect. Also PLEASE give direction on how to set up your water system for the drill bit* I LOVE IT.
The best way to align the counter part is by touch. With the machine off, lower the drill bit so that it touches the counter part and then run you fingers up and down the junction between them. Tap the magnetic base that holds the counter part with a mallet until you don't feel an overhanging edges on the drill bit or counter part. The water supply can be configured in many different ways. Give us a call to discuss options that might work best for you. Thank you!
I have natural black agate (onyx) I know how to drill my rocks now nice and slow and gentle I have to use a dremel and have the agate under a bit of water thank you I have a piece picked out just the way it is I just needed to know how drill to make it a pendant
Hi Jordan, the white cleaning stone (or sharpening stone) is aluminum oxide. It removes a small amount of the metal to expose more diamonds and improve drilling function. Here is a link to to them on our site: guntherdiamondtools.com/collections/accessories/products/sharpening-stone-for-diamond-core-drill-bits-gunther-diamond-tools
Good video - but I can drill 1mm, 2mm ,3 mm holes in stone all day but I'm trying to drill 3/4" hole in stones that are like 2" in diameter , 5/16" thick and the stones keep breaking - any ideas or instructions - anyone - thx!
You will feel the the drill bit go through the stone and touch the counter part. Its ok if the two parts touch while you're drilling as long as you stop and back off. If you continue to drill the counter part will grind down, but you can file it down to make it flat again. You can also set your drill stop to zero at the point where the two parts touch so that you
Hello, here is a link to our website: guntherdiamondtools.com. You can learn more about our drilling systems and diamond drill bits and prices. You can also send me an email will specifically questions anytime. Thank you
The machine in this video is the Gunther Hobby System. Here is a link guntherdiamondtools.com/collections/bench-drilling-machines/products/lapidary-bench-drill-press-the-gunther-hobby-drilling-system
Our Multidrill Startup Kit is a great option for the DIY crafter. This water spindle will modify a drill press that you already own and allow you to drill stone, glass, an ceramic with the water feed and sintered diamond core drill bits. Here is a link: guntherdiamondtools.com/products/lapidary-water-cooled-multidrill-system-startup-kit-gunther-diamond-tools
hey! where can i buy a "starter hole" from? i just bought the dremmel workstation and i plan on using it for the same purpose to drill into quartz
Can you direct how to set up a counter post" This is exactly what I have been trying to figure out. How to get both sides to be exact meet, if i eyeball it im always off. This is perfect. Also PLEASE give direction on how to set up your water system for the drill bit* I LOVE IT.
The best way to align the counter part is by touch. With the machine off, lower the drill bit so that it touches the counter part and then run you fingers up and down the junction between them. Tap the magnetic base that holds the counter part with a mallet until you don't feel an overhanging edges on the drill bit or counter part.
The water supply can be configured in many different ways. Give us a call to discuss options that might work best for you.
Thank you!
I have natural black agate (onyx) I know how to drill my rocks now nice and slow and gentle I have to use a dremel and have the agate under a bit of water thank you I have a piece picked out just the way it is I just needed to know how drill to make it a pendant
Thank you so much, awesome, what kind of drilling system is this?
Hello, we are Gunther Diamond Tools - guntherdiamondtools.com. Let me know if you have any questions.
Hi!
Can you please write what is for Drill maschin you use and where can I buy the sam maschin?
Thankyou in advance
Hello, the drilling system is from Gunther Diamond Tools. Here is a link: guntherdiamondtools.com
Hi, what is the white cleaning brick for bit made from? Would pumice or a brick work? Thank you.
Hi Jordan, the white cleaning stone (or sharpening stone) is aluminum oxide. It removes a small amount of the metal to expose more diamonds and improve drilling function. Here is a link to to them on our site:
guntherdiamondtools.com/collections/accessories/products/sharpening-stone-for-diamond-core-drill-bits-gunther-diamond-tools
Good video - but I can drill 1mm, 2mm ,3 mm holes in stone all day but I'm trying to drill 3/4" hole in stones that are like 2" in diameter , 5/16" thick and the stones keep breaking - any ideas or instructions - anyone - thx!
Hie do you know when the drill bit meets the counterpart below?
You will feel the the drill bit go through the stone and touch the counter part. Its ok if the two parts touch while you're drilling as long as you stop and back off. If you continue to drill the counter part will grind down, but you can file it down to make it flat again. You can also set your drill stop to zero at the point where the two parts touch so that you
Cómo puedo comprar esta piesa
I just need to know your website so I can purchase this product please.
Thanks
Hi Jorge, thank you for your interest. Here is a link to our site: guntherdiamondtools.com Feel free to reach out anytime if you have questions.
what the fuck is a hobby system. that's a fucking drill press
brand name of diamond drill pls tnx
Gunther Diamond Tools - guntherdiamondtools.com
Hi sir I am from India 🇮🇳 kindly send me the details of the products
Hello, here is a link to our website: guntherdiamondtools.com. You can learn more about our drilling systems and diamond drill bits and prices. You can also send me an email will specifically questions anytime. Thank you
Hello what is the Price of theis machine
The machine in this video is the Gunther Hobby System. Here is a link guntherdiamondtools.com/collections/bench-drilling-machines/products/lapidary-bench-drill-press-the-gunther-hobby-drilling-system
What is the RPM of this machine?
The machine in this video is operating at 2400 rpm. Our hobby and Pro systems are belt driven and can be adjusted from 1080, 2400, 4500 rpms.
What is price please tell me
We have a few options to choose from. Check them out here: guntherdiamondtools.com
Price please
We have three different system at different prices. You can check them out here -
guntherdiamondtools.com
How can I by one
Can I have your email
You can buy them here: guntherdiamondtools.com
ANYONE can drill with an expensive set up loke you have there....What about the DIY crafter that desn;t want to spend thousands on a rig????????
Our Multidrill Startup Kit is a great option for the DIY crafter. This water spindle will modify a drill press that you already own and allow you to drill stone, glass, an ceramic with the water feed and sintered diamond core drill bits.
Here is a link: guntherdiamondtools.com/products/lapidary-water-cooled-multidrill-system-startup-kit-gunther-diamond-tools