I dont mean to be off topic but does any of you know a way to log back into an instagram account?? I somehow lost my password. I would appreciate any assistance you can offer me.
@Kenneth Vincenzo I really appreciate your reply. I got to the site on google and im waiting for the hacking stuff now. Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
So , if I want to used I Arduino then I can use it with esp32 and with the help of Arduino and esp 32 can i make voice control, with phone (blynk) and normally physical buttons, is it possible with esp32 and Arduino?
any of you guys know how to deal with the new blynk 2.0...i can do it with the old blynk app but the new blynk i cannot make a request to the webhook im not sure whats going on...
Hai Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program? Ie; I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk. Is it possible?
I have one question Why my node mcu esp8266mod is geeting very hot and spark when i connect it with my laptop through usb cable? Because of high voltage supply? If yes then what should i do? Plzz help me🙏
Hi Sir, Iam getting fatalerror: Failed to connect to ESP8266: Timed out waiting for packet hearder. I used this software and upload in the ESP8266. Could you please check and comments?
In this video you connects node mcu with mobile hotspot. But in case if we have to control these thing from so far, how you can connect the node mcu with internet? And also whether the mobile connect with home wi fi or node mcu.
Thanks for your exceptional good video, patience and the hard working behind all of these. Is it possible to make the AC Dimmer which runs both Blynk app by using slider button (or "+ve" & "-VE" buttons instead of slider ) and two physical touch sensor switches (say 4 pcs TTP223 or 1 PCS TTP 224 for controlling 4 steps ...etc. ) for manual Control (Increasing or decreasing the bulb intensity or fan speed ) , If so please make a video particularly in coding part, It is difficult to relating the physical two buttons with Blink slider in coding part. It is more better to add 2 more button for controlling 2 ac loads (Just on and off ). Thanks
Already done same process..able to control appliance through blynk app by tapping just on/off..but main issue is that when I say turn on relay one ..Google assistant says ok turning on relay one but there is no turning on relay one ..what's the issue .... awaiting ur response
Nice explain...but ifttt platform gives only 3 appletes for free.. if you want more access you need to upgrade the applets creation.. Is there any other possible way to control more appliances apart from ifttt platform
Hi sir. I would like to clarify how does ifttt connect to google voice command? Or it is automatically sense the voice from google and the ifttt automatic capture it and initiate the command?
Here, Google assitance is connected with IFTTT. So when you say, the google assistance send it to IFTTT server, then IFTTT send the respective trigger to Blynk server.
Hi,bro. In my arduino ide, when I went to tools to select NodeMCU board that board is not there. only arduino board is there and its types. No NodeMCU. Please help me bro. I have subscribed your channel..
Sir. I have an node mcu and it have an program but after watching your video I can upload your program for making wifi light so how to delete previous program(coding) in node mcu.
great project. everything is working except last part when i ask google assistant to turn on light, it says lights have not been set up yet. how can i solve this
excellent friend, very well explained, thank you very much. I want to ask you, I use blynk, would it be possible to use ifttt also with virtual blynk pins? or does it only work with the physical pins? thanks Greetings
I am really loving this stuff. I am also trying similar project on my own inspired from your video. But blynk app is not working for me. It says could not connect to server. Do you also face this issue and how do you resolve it. Thank you 😊
Pinging blynk-cloud.com [188.166.206.43] with 32 bytes of data: General failure. General failure. General failure. General failure. Ping statistics for 188.166.206.43: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), help me??
Excellent Video Sir..I really appreciate your efforts. I also want to do this project as my final year project. and I want to add a new feature like "Monitoring the home".i.e if i ask the google assistant about the condition of my appliances , then it can monitor the home and reply me if the appliances are turned on or off. Can i implement this feature in google assistant? If yes, then please let me know sir. Any help will be greatly appreciated!!. Thank you!!
@@TechStudyCell it worked for me only when i say switch on LED but when i use the comman Google Turn off LED it says it is not set up that means i can only control one LED to turn on and not even enable to turn it of advice in this issues
Very good explained, But still My project is not working with the voice command. it is working well with the Blynk button. I have tried it so many times, but failed to operate with voice command. Please help.
hello sir, Iam able to do 3 applets in IFTTT web. Do we have any other options to create more applets? IFTTT Says that You've created 3 of your 3 Applets limit. Upgrade now to create unlimited Applets and access powerful Pro tools.
Hey bro,it's a awesome video,easy to understand.. but i faced a little problem,i enable to control relay by google assistant and blynk switch,but when i command the google assistant to turn on/off the relay,the feedback switch status on blynk app is not following actual relay status. So please i need your help.. thanks..
@@TechStudyCell Thank your for your reply. When the relay turned on or turned off by google assistant,the switch button on blynk is not changing ( real time ). The switch button is not following actual relay status,when i command by google assistant only. Currently i used regular IFTTT with limited 3 applets. Is that affecting?
@@TechStudyCell i only want max of 6 but if i upgrade to pro it is unlimited but i have to pay monthly. Hmm. Any other option on this? How about alexa is it free?
@@TechStudyCell also i notice when i use voice activation sometimes it doesn't function. Maybe my internet is slow. But in blynk app it is more reliable
Excellent documentation, clear instruction, no annoying music loops, extensive video list - subscribed!
Thanks for your feedback..
I dont mean to be off topic but does any of you know a way to log back into an instagram account??
I somehow lost my password. I would appreciate any assistance you can offer me.
@Samuel Jack instablaster ;)
@Kenneth Vincenzo I really appreciate your reply. I got to the site on google and im waiting for the hacking stuff now.
Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@Kenneth Vincenzo it worked and I actually got access to my account again. Im so happy:D
Thanks so much you saved my ass :D
i am glad to watch this content because i can know how take over with the internet of things and learned more about them .
Crystal clear!!! thank you... subscribed!!!
Thanks
Thanks man! very clear presentation.
You are welcome
Thanks for the video, I enjoyed the info.
You are welcome
Excellent home automation project...
Thank for sharing 👍
You are welcome
It was the best explained video I have seen! Do a video of using Google with out ifttt
My google assistant is saying turning on, but it does not turn it on or off
So , if I want to used I Arduino then I can use it with esp32 and with the help of Arduino and esp 32 can i make voice control, with phone (blynk) and normally physical buttons, is it possible with esp32 and Arduino?
This video activates my adrenaline rush
Thanks for the information.
You are welcome
Very good tutorial thanks
any of you guys know how to deal with the new blynk 2.0...i can do it with the old blynk app but the new blynk i cannot make a request to the webhook im not sure whats going on...
Excellent project 👍
Thanks
Hai
Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program?
Ie;
I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk.
Is it possible?
I have one question
Why my node mcu esp8266mod is geeting very hot and spark when i connect it with my laptop through usb cable?
Because of high voltage supply?
If yes then what should i do?
Plzz help me🙏
The arduino ide says xtensa-lx106-elf-g++ file does not exist i am not able to upload the code please help me out
can we use 4 channel relay module instead of 2 channel relay module
How to make iot system with all these things combined like manual switch ,google assistant and blynk
Hi Sir, Iam getting fatalerror: Failed to connect to ESP8266: Timed out waiting for packet hearder. I used this software and upload in the ESP8266. Could you please check and comments?
Great video 👍👍👍👍
Thanks
thanks bro. very clear instructions but i have one question. the response of esp and relay in slow. why is that?
In this video you connects node mcu with mobile hotspot. But in case if we have to control these thing from so far, how you can connect the node mcu with internet? And also whether the mobile connect with home wi fi or node mcu.
how can I switch on both lights in a single command, what change I should make in the webhook URL to control 2 digital pins simultaneously
Hey bro, if you found that out, please tell me !!
You can use a 3rd pin on which both lights are connected with that pin
Thanks for your exceptional good video, patience and the hard working behind all of these. Is it possible to make the AC Dimmer which runs both Blynk app by using slider button (or "+ve" & "-VE" buttons instead of slider ) and two physical touch sensor switches (say 4 pcs TTP223 or 1 PCS TTP 224 for controlling 4 steps ...etc. ) for manual Control (Increasing or decreasing the bulb intensity or fan speed ) , If so please make a video particularly in coding part, It is difficult to relating the physical two buttons with Blink slider in coding part.
It is more better to add 2 more button for controlling 2 ac loads (Just on and off ). Thanks
Already done same process..able to control appliance through blynk app by tapping just on/off..but main issue is that when I say turn on relay one ..Google assistant says ok turning on relay one but there is no turning on relay one ..what's the issue .... awaiting ur response
Explained very clearly👌🏻
Thanks
How did you connect the wifi
Nice explain...but ifttt platform gives only 3 appletes for free.. if you want more access you need to upgrade the applets creation..
Is there any other possible way to control more appliances apart from ifttt platform
sir, I'm having a problem with the IP address all 4packets are lost, please help
for me google assistant did not work, what mistake i did can u plz tell me. thank u for shring this video
can you send me a CZcams link home automation by using ESP-12E model
Is it safe if i will use it permanent on our chandelier without using chord from charger?
Thanks bro
Welcome
Hi sir. I would like to clarify how does ifttt connect to google voice command? Or it is automatically sense the voice from google and the ifttt automatic capture it and initiate the command?
Here, Google assitance is connected with IFTTT. So when you say, the google assistance send it to IFTTT server, then IFTTT send the respective trigger to Blynk server.
The voice command is not working... But I have gone through accordingly can you tell me the possible mistakes that I can make
Hi,bro. In my arduino ide, when I went to tools to select NodeMCU board that board is not there. only arduino board is there and its types. No NodeMCU.
Please help me bro.
I have subscribed your channel..
ifttt now charging money /...... only 3 free applets which can control only 1 device ....any alternatives???
TTGO Tcall esp32 me gpio pin ka number kya he
for pin13
Sir. I have an node mcu and it have an program but after watching your video I can upload your program for making wifi light so how to delete previous program(coding) in node mcu.
REPROGRAM IT
great project. everything is working except last part when i ask google assistant to turn on light, it says lights have not been set up yet. how can i solve this
Thanks. You have to use same Google account in IFTTT. And also give the required permissions.
excellent friend, very well explained, thank you very much. I want to ask you, I use blynk, would it be possible to use ifttt also with virtual blynk pins? or does it only work with the physical pins? thanks Greetings
Yes, you can use virtual blynk pins
I am really loving this stuff. I am also trying similar project on my own inspired from your video. But blynk app is not working for me. It says could not connect to server. Do you also face this issue and how do you resolve it.
Thank you 😊
Hello, can you please guide me how can I add 4 nos. on off switch to control the appliance along with blynk and voice?
You need help?
Is it possible to read sensor value on Bylink with node MCU?
Yes. Already made video on that
How many relay control with google assistant
please help why google assistant says : go to google home she not accept my voice commande keys
Only 4 applets accepted in IFTTT which 1 pair 1,0 for relay 1 and same for relay 2
Where exactly are we using esp8266 wifi module?
Great 👍👍
Please make a project with online+manual+offline
Please refer to czcams.com/video/gpB4600keWA/video.html
nice
Thanks
Yea sir thanks 😊 thanks for the update on my new bill 💸 please let
Pinging blynk-cloud.com [188.166.206.43] with 32 bytes of data:
General failure.
General failure.
General failure.
General failure.
Ping statistics for 188.166.206.43:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
help me??
Sir
I have a problem. Please help.
My 'Nodemika' program does not take. Because 'Pout' does not show. What should I do? Please tell ...
Try other usb port and check whether the port is showing or not.
Sir can you attach code and library in the comment section again .I can't open the file.
Excellent Video Sir..I really appreciate your efforts. I also want to do this project as my final year project. and I want to add a new feature like "Monitoring the home".i.e if i ask the google assistant about the condition of my appliances , then it can monitor the home and reply me if the appliances are turned on or off. Can i implement this feature in google assistant? If yes, then please let me know sir. Any help will be greatly appreciated!!. Thank you!!
Nice bro go ahed
Can I use different wifi?
❤🎉
Excellent home automation project. Sir can add manual switchs?
Please refer to the following tutorial czcams.com/video/gpB4600keWA/video.html
The blynk.cloud IP ADDRESS will be same for all or different
No. Please refer to recent video on new Blynk IoT and IFTTT
they gave me only 3 Applets .... how to create 4th applet of 2nd relay ?
Now you can control only 1 relay for free account.
Will this method work with usb fan and lamp aswell?
you can turn on and off anything
Thanks for reply! I already figured it out btw
Can I use data connection, aside from WIFI?
The nodemcu can only connect to some wifi for data connection
Thanks for sharing great video, Can you make the schedule tutorial for week or month sir ? thx
Trying my best to do that.
Now the IFTTT is not more free, can we do that with other system openhab ?
did u get any alternates now
I need some help
when i reboot node mcu ..all relay on ..automatically ..this problem i am facing
Please refer this video....czcams.com/video/HFGP1YqUPy0/video.html
Not connect with iftt please help
Hi i try following the same method but it asking me to pay for the IFTTT in you video it was normal
As per the new rules, you can create max 3 Applets for free. So you can control only single relay from Google assistant.
@@TechStudyCell it worked for me only when i say switch on LED but when i use the comman Google Turn off LED it says it is not set up that means i can only control one LED to turn on and not even enable to turn it of advice in this issues
Very good explained, But still My project is not working with the voice command. it is working well with the Blynk button. I have tried it so many times, but failed to operate with voice command. Please help.
IFTTT is not free now. Have you purchased their services.
What the Google assistant says?
Have you signed up with the same google account on iftt in which ur using the assistant?
Can u give..all stuff amazon link?
given in description
Can l use wi fi hotspot's Password and name instead of wifi???
yes bro.
sir who we get ip address
Can you show the connections in brief
hello sir, Iam able to do 3 applets in IFTTT web. Do we have any other options to create more applets?
IFTTT Says that
You've created 3 of your 3 Applets limit. Upgrade now to create unlimited Applets and access powerful Pro tools.
Currently the IFTTT is not free.
@@TechStudyCell do we have any other options to do it freely?
Sir this connection block diagram send me
how to set more than 3 commands in ifttt?
Now IFTTT is not free. So you have to pay.
@@TechStudyCell is there any other way to access it for free?
Dada in want to control my 12volt led lights in car. Can you help me out
If you face any issues.. you can ask me here
Have you done it?
bro how can i contact you
it is showing time out error
Hey bro,it's a awesome video,easy to understand.. but i faced a little problem,i enable to control relay by google assistant and blynk switch,but when i command the google assistant to turn on/off the relay,the feedback switch status on blynk app is not following actual relay status. So please i need your help.. thanks..
In Blynk mode will be switch and to turn off relay it will send "1" and for turn on "0". please check the button configuration
@@TechStudyCell Thank your for your reply. When the relay turned on or turned off by google assistant,the switch button on blynk is not changing ( real time ). The switch button is not following actual relay status,when i command by google assistant only. Currently i used regular IFTTT with limited 3 applets. Is that affecting?
Esp32 or esp8266 board same
No
@@TechStudyCell sir mere pass expressif esp32 wroom 32 wala wifi, blutooth wala card hai uskay liya kon sa software install karna hoga pc per
Can I made this with Arduino also?
No. You have to use any WiFi module like ESP01 with Arduino.
I need some help. Do you use gmail?
Yes. I do.
Ifttt use only 7 days free ?
add push button to this video
Bro es ka liya wifi lga hona chiya ghar ma
Yes
sir can you tell me how to do this with one relay module??
Will make video on this soon
@@TechStudyCell thank you soo much!!!
Brooo...
Nice project, how much it cost to make this project
8 realy module Rs 600 & Rs 500 nodemcu on daraz & u r control 9 home appliances a nodeMCU 1 MCU board in 9 digital pin
bro what is
char ssid[] = "YourNetworkName";
char pass[] = "YourPassword";
You WiFi credentials. WiFi name and WiFi password
Bro wifi not showing in my phone
Esp not connect ing
What is the cost of this project ? I’ll pay you whatever the charges are.
will 1k be okay?
Is Blynk a free app?
Yes, it is free for. Small projects.
Only 3 free applet?
Yes... For free account
@@TechStudyCell i only want max of 6 but if i upgrade to pro it is unlimited but i have to pay monthly. Hmm. Any other option on this? How about alexa is it free?
If you have Alexa device like echo dot, then it is free. You can check this video. czcams.com/video/tIFEtHVLexw/video.html
@@TechStudyCell also i notice when i use voice activation sometimes it doesn't function. Maybe my internet is slow. But in blynk app it is more reliable
Ifttt free mai bas 3appelate de raha hai
Now we can create only 3 templates 😂😂
Yes. So you can only use a single relay.
@@TechStudyCell find some solution bro so that we can add 4 relay
Reply me as soon as possible
Webhooks is asking for money