Been busy today engraving stones from our beach with 'reserved' and 'wedi'i gadw'. Ready to use over the busy Easter period. Bit of a dirty job but the Dremel powered through them.
Hi Trina, The rocks we used were from the beach in front of one of our restaurants. I tried to pick the smoothest surface not necessarily the softest. Just avoid the stones that are like gritstone as it doesn't give a clean finish.
Hello sorry for slow reply, I bought on Amazon it's a Dremel they have many multi tool models and used this tip www.amazon.co.uk/Dremel-2x4-4mm-Diamond-Wheel-Point/dp/9733341657/ref=sr_1_7?s=diy&ie=UTF8&qid=1512394656&sr=1-7&keywords=dremel+multi+tool+diamond+cutting+tool
Why does this look like you are cutting butter? I use a dremel too but my bits dont really cut into the stone and are used up pretty quickly, what bits do you use?
my English is not very well cause i'm dutch and 12 years old but I found out that you got two parts you got a sort of motor thing the thing that is the source and like a thing on top of it but how do i know if the thing on top of it fits on the source
Je kunt bij een dremel de kop aandraaien daardoor kun je allerlei maten gebruiken en dat stukje voorop is met diamant erin... Daardoor kun je de stenen slijpen;) denk na een jaar werd t toch tijd dat iemand er antwoord op geeft he hahhaha see ya greeetsz!! Wes uit NL
I just wanted someone to cut an 6X8 inch rectangle into a rock to embed a plaque for my grandson Tommy Burket who was killed by a criminal. Professionals claim they cannot do it but my husband was able to do it on a piece of granite/ marble???? I wanted the rectangular 1/4 inch cut made into a rock (NOT marble or granite).I CANNOT FIND ANYONE OR ANYPLACE ON THE INTERNET THAT EVEN SHOWS IT CAN BE DONE..and the counter top people say they don't have equipment to do this...REALLY??? I DON'T GET IT!!!!!
Neren tedarik edilir Ca oyma taşlama Yumurta oyma makinası ve uçları devri kaç olmalı böyle bir şey yok sadece abone ol var sen faydalı olaksınki bende sana abone olayım . Çizgi filim gibi seyret ?
This is what I do when god is watching me. Great hobby
Awesome work. So how do we "color" the words like in blue or black etc ? Do we just paint em. Stain em? Would that last ?
They were using a Dremel wand and a diamond cutting bit.
Thank you!
What diamond bit are you using?
Is the drill bit that good or are the stones = Soapstones?
can you tell what the name of the tool engraver you using?thnk u
Hello MAy I use hard beach rocks? Or do you have a soft rock? thankyou!! Great video thankyou
Hi Trina, The rocks we used were from the beach in front of one of our restaurants. I tried to pick the smoothest surface not necessarily the softest. Just avoid the stones that are like gritstone as it doesn't give a clean finish.
Ardderchog Dylan. What tools do you use and from where can I obtain it. Diolch yn fawr!
Hello sorry for slow reply, I bought on Amazon it's a Dremel they have many multi tool models and used this tip www.amazon.co.uk/Dremel-2x4-4mm-Diamond-Wheel-Point/dp/9733341657/ref=sr_1_7?s=diy&ie=UTF8&qid=1512394656&sr=1-7&keywords=dremel+multi+tool+diamond+cutting+tool
What speed setting are you using
Is that a diamond tip you're using? Did you tried to use water for cooling?
+Eugen Popa HI, Yes it was a diamond tip I used but it didn't get too hot so I didn't use water. Thanks for watching. :)
water is where its at.
What kind of tool is that?
Which tool do you use?
Wow
I want to buy this sculpting machine, what is its name?
Plz tell me the name of carving tools
Can I use on marble
Can i use a drill for this?
can i use any rock or this specific type
I used pebbles as smooth as I could find
Why does this look like you are cutting butter? I use a dremel too but my bits dont really cut into the stone and are used up pretty quickly, what bits do you use?
EpicSchizophrenium think it depends on the composition of the stone? Just a standard diamond wheel point 4.4
@@dylansrestaurant489 hmm guess i need to try with diffrent stones. Anyway thank you for your answer
How many price of this machine
ye machine kahan per milti hai aur price kitni hai
What exact bit is that? and where can i get it. That works nice! Great work. Thanks for showing!
Hi Thomas here's a link to the bit I used. www.amazon.co.uk/gp/product/B0035PVVKU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 hope this helps :)
Thomas McCusker - Any place that sells Dremel tools should have or can get a selection of bits that will do the job. Diamond of Carbide...your choice.
@@dylansrestaurant489 price
@@thehunter3386 hi
@@Akashjackk hi right back atcha!
my English is not very well cause i'm dutch and 12 years old but I found out that you got two parts you got a sort of motor thing the thing that is the source and like a thing on top of it but how do i know if the thing on top of it fits on the source
Your english is great. Yes there is a a tool with a motor called a Dremel Multitool and then you fit a tool in it called a Diamond Wheel Point. thanks
Je kunt bij een dremel de kop aandraaien daardoor kun je allerlei maten gebruiken en dat stukje voorop is met diamant erin... Daardoor kun je de stenen slijpen;) denk na een jaar werd t toch tijd dat iemand er antwoord op geeft he hahhaha see ya greeetsz!! Wes uit NL
@@dylansrestaurant489 may i have your email address plz
Please I need the this machine and the bit. What is the name and the make of the machine and the drill bit
How much price?And where gate this machin
Whats tge name of that tool
How?
What is the name of the engraver you used?
Hi Ryan I used a Dremel
Reciprocating or rotary? I got the Dremel Engraver 290-1 and it doesn't seem to work as well as yours.
what is that tool :)
What is the name of tool
Where did you buy this, Amazon? And what is it called. I want to buy one just like this
It's called a rock you can find them on the beach
It’s called a dremel :)
@@samuelwilson753but I don’t live near a beach I’m surrounded by lakes but no beaches 🤣
bhaya yaha masin kaha milega my India se hu
Of course he's a lefty!
where can I found these stones? ty
We have a beach in front of one of our restaurants so are stones came from there.
Price plzz
I'd love to do this
Tools name and make model please??
Brand name please
मुझे यह मशीन खरीदनी है कहां मिलेगी
Price
Use water
can i use any drill for this
The drill bit I used was for specifically for engraving.
+Dylan's Restaurant i know about the drill bit im saying can i use a normal drill with the bit
I couldn't tell you sorry.
Mr toast u have to use diamond drill bits for rocks hardness 6 and above
I just wanted someone to cut an 6X8 inch rectangle into a rock to embed a plaque for my grandson Tommy Burket who was killed by a criminal. Professionals claim they cannot do it but my husband was able to do it on a piece of granite/ marble???? I wanted the rectangular 1/4 inch cut made into a rock (NOT marble or granite).I CANNOT FIND ANYONE OR ANYPLACE ON THE INTERNET THAT EVEN SHOWS IT CAN BE DONE..and the counter top people say they don't have equipment to do this...REALLY??? I DON'T GET IT!!!!!
Nephrite?
Geoff Lotton - ie. Jade...
Neren tedarik edilir
Ca oyma taşlama
Yumurta oyma makinası ve uçları devri kaç olmalı böyle bir şey yok sadece abone ol var sen faydalı olaksınki bende sana abone olayım .
Çizgi filim gibi seyret ?
finger nails