WEATHER MONITORING SYSTEM Tutorial | Nodemcu ESP8266 with WEATHER MONITORING SYSTEM [Full Guide]
Vložit
- čas přidán 12. 09. 2024
- Hello guys,
This video includes how to make a Weather Monitoring System with Nodemcu. It uses the ESP8266 (Nodemcu) board and the Blynk application. Also, this Weather monitoring system project is presented step by step so that everyone can understand.
OK enjoy it now.
Short and sweet tutorial.Only from SriTu tech. If you think this video is good, don't forget to like and comment.
WEATHER MONITORING SYSTEM Tutorial | Nodemcu ESP8266 with WEATHER MONITORING SYSTEM [Full Guide]
• WEATHER MONITORING SYS...
Weather Monitoring System
***Names of components.
***step by step.
***With code.
Subscribe to more videos --- / sritutech_sritu_hobby
Website for more tutorial --- www.srituhobby...
Android app for more tutorial --- bit.ly/3GWcmmD
Our store with the best prices
========================================
srituhobby.com...
========================================
Previous Nodemcu ESP8266 tutorials
1.Nodemcu with blink LED bulb | NODEMCU LED BLINK tutorial [ESP8266]
bit.ly/3pedgAO
Nodemcu with blink LED
2.NODEMCU BLYNK tutorial | NODEMCU BLYNK with LED blink [Code and libraries]
bit.ly/3aSMyIK
NODEMCU BLYNK
3.Nodemcu with Firebase | Nodemcu with Firebase full tutorial [Code and libraries]
bit.ly/3aZCoGe
Nodemcu with Firebase
4.SERVO MOTOR NODEMCU Tutorial | Blynk app with SERVO MOTOR NODEMCU Project [Code & Libraries]
bit.ly/3cZudMS
SERVO MOTOR NODEMCU
5.ESP8266 NODEMCU WEB SERVER | ESP8266 NODEMCU WEB SERVER Tutorial using Relay Module [Full Guide]
bit.ly/378yz0l
ESP8266 NODEMCU WEB SERVER
6.How to make a PIR SECURITY SYSTEM with ESP8266 | Blynk application with PIR SECURITY SYSTEM[Nodemcu]
bit.ly/3rNJKng
PIR SECURITY SYSTEM
7.RGB LED NODEMCU Project | How to use RGB LED NODEMCU with Blynk app [Full guide]
bit.ly/37928ie
RGB LED NODEMCU
8.Water tank level monitoring system with Nodemcu and Blynk application - [ESP8266 Project]
bit.ly/3qqxbO4
Water tank level monitoring system
9.IRRIGATION MONITORING SYSTEM | How to make an IRRIGATION MONITORING SYSTEM using Nodemcu and Blynk
bit.ly/3b16h9h
IRRIGATION MONITORING SYSTEM
10.How to make a Fire alarm security system using Nodemcu | Fire alarm Nodemcu project [Code,Circuit]
• How to make a Fire ala...
Fire alarm security system
11.How does work Nodemcu with DHT11 sensor - ESP8266 Nodemcu with DHT11 and Blynk application
bit.ly/2LHw9hF
Nodemcu with DHT11 sensor
12.How to make a Nodemcu GAS LEVEL MONITORING system | Blynk with GAS LEVEL MONITORING [MQ2 sensor]
bit.ly/2LMOE4u
GAS LEVEL MONITORING
13.LDR WITH NODEMCU Tutorial using Blynk app | LDR WITH NODEMCU Light Monitoring System [Step by Step]
bit.ly/3d49Z4w
LDR WITH NODEMCU
14.GOOGLE ASSISTANT NODEMCU Tutorial | Home Automation using GOOGLE ASSISTANT NODEMCU project
bit.ly/3rQjPv7
GOOGLE ASSISTANT NODEMCU
( Source code and circuit diagram )
=========================================
Website -- bit.ly/3w1lYqe
Android app -- bit.ly/3GWcmmD
=========================================
Part's List (Our store -- SriTu Hobby)
==========================================
1.Nodemcu board x 1 -- bit.ly/4460nNI
2.Rain sensor x 1 -- bit.ly/42YrQAZ
3.DHT11 sensor x 1 --- bit.ly/3QCwAsW
4.LDR sensor x 1 --- bit.ly/3QwHhwY
5.Jumper wires. --- bit.ly/43V7gSR
6.Breadboard x 1 -- bit.ly/3V4QhK4
7.LCD display x 1 -- bit.ly/40u3pcO
8.I2C module x 1 -- bit.ly/3oDXtjV
==========================================
Part's List (Amazon)
==========================================
1.Nodemcu board x 1 -- amzn.to/3hwqG7v
2.Rain sensor x 1 -- amzn.to/2MdgE0W
3.DHT11 sensor x 1 --- amzn.to/2Xnbim0
4.LDR sensor x 1 --- amzn.to/3u36lz9
5.Jumper wires. -- amzn.to/3k9ZnkT
6.Breadboard x 1 --- amzn.to/35rdMVE
7.LCD display x 1 -- amzn.to/3isdBgz
8.I2C module x 1 -- amzn.to/3hqY5jC
==========================================
( Social media links )
==========================================
Facebook-------- / srituhobby
Twitter------------- / sritu_hobby
Instagram------- / sritu_hobby
Pinterest--------- / sritu_hobby
Tiktok------------- / sritu_hobby
Reddit------------- / sritu_tech
Linkedin----------- / sritu-hobby
Snapchat-------- / srituhobby
Threads---------www.threads.ne...
==========================================
Thanks for watching......................
If you learned something in this video,
**Like
**Share.
**Subscribe.
What do you think? please comment below.
#SriTu_Tech_Nodemcu #weather_station #weather
![IOT based home automation using Nodemcu | Step by step instructions [ESP8266 project]](http://i.ytimg.com/vi/bNB-XDBZT8I/mqdefault.jpg)
If I don't want show in blynk app can it possible?? In Blynk 2.0 i am unable to do it.
I'm taking reference of your thingspeak weather system I just want to add ldr sensor too in that system can u guide me what's code for that here?
සුපිරී ආ👍.
What software did u use for designing the CIRCUIT??
I think Fritzing
what software did u use for buildingt the circuit??
Can I use a power bank instead by connecting a micro usb port?
Please connect a external power supply.
can you use this without internet connection, like only display in LCD not in application?
For what purpose LDR sensor module is used sir?
Measure light value
4:43
Supiri bro
I am getting invalid conversation from int to t back light pol
External power supply ksacha through dyacha sir please reply to me
What is the last wire connected at 7:51 ?? Vcc -5v and GND +5v??.
External power supply
Sir how do I do that external power supply
@@sritu_hobby sir how do I setup the external power supply, it it possible that I skip only that part ?
Why we use Nodemcu in this project & why you are not Using Arduino
Tha nodemc board has WIFI.
@@sritu_hobby thanks
Can we use ESP32 instead of ESP8266?
You must change code lines.
If i added the bmp180, can i use only 1 esp or do have to add more esp ?
can we do these using Arduino uno board?
my rain drop sensor is showing 100 and not showing value after puting some drop of water...
what to do now there is a nobe i have set it max in the sensor...
You can change it through the program
I have uploaded the code to nodemcu, but blue colour inbuilt led is not working, please can anyone say what is the problem?
Same here you know about it
Sir system se hardware per code apload karne per lcd Mae sirf light aa rahi hai kuchh likh nahi raha hai kyu
same here did your problem resolved if it is can you help me
can we use wire without external power supply
We have to provide a external power
LCD SHOW LINE NOT TEXT
Is it possible to do the project using arduino ??
It's not possible
i couldnt find my device on the board menu. how to solve this?
edit: solved this. another question.
can this system work without the lcd display?
please reply as soon as you can. thank you in advance
@@sritu_hobby do i need to change anything in the coding?
what type of power supply is given ??
5v power supply
Sir when I execute the code it is showing LiquidCrystal_I2C h no such file or directory...please solve my problem sir
Please include the I2C library
Can I use an esp8285 ?
You can try. But you have to change the code
How to solve problem( no connection established on lap while connect to nodemcu for insert the code) sir pls tell me 🙏🙏
Pls answer me sir
What's your issue
what is your constraints on this project?
invalid conversion from 'int' to 't_backlighPol' [-fpermissive]
Error
Cloud's work has been done here.???
yes
can I use an arduino nano with this code
It's not possible
Can u make this same project on new blynk 2.0 app its very confusing
You can try it
what is measure here by ldr sensor
Light
DHT.h: No such file or directory
,i found this error plss help me to rectify it
@@sritu_hobby ok sir
Where is tamplet name and tamplet id????? Please sir tell me
Can I use esp32 ?
You have to change the code
I am facing an issue with libraries plz help me plzz
esp sensor and DHT11 sensor libraries
plz help
exit status 1
Error compiling for board NodeMCU 1.0 (ESP-12E Module).
Im having this error could you pls help
Include the library files
@@sritu_hobby Already done..But still showing this
@@sritu_hobby Problem solved sir.. A library file called adafruit unified sensor was needed to be installed..Spent almost 2 days in rectifying this error
bro could you help me to resolve this problem i am also facing same issues
@@anshulvinod5627
what is the power supply
5VDC power supply
Bhai tera Arduino kidhar chupa ke rkha h
i am not able to activate the port ...please help me
First you should install arduino drivers
@@sritu_hobby that issue got resolved.....
Not I am getting "selected serial port _ does not exist or your board is not connected"
can you send blynk app setup link
Check our website -- srituhobby.com
bro how to setup blynk from start
Please visit my pervious videos
How much amount is required to complete this project?
Check it on description
Auth code not received on my Gmail
Check it on spam folder
@@sritu_hobby and Sir my blynk app not showing option to create new project. It is showing add new device or template
Please use new blynk app
@@sritu_hobby can you please send me your email address or contact number I will send you screenshot
Check it on channel about tab
Where do i gete SsId and Password
Bro blynk app code
code is not working sir
Bro not working ha
Where is the code link?
Please visit the video description
the application name if you can
Blynk
Hello
gas alarm fire alarm dht11 sensor and relay manual switch open closed door open closed hall effect sensor warning bylink 2.0 compatible home alarm system
where do you find the program code to down load??
@@sritu_hobby Really???
@@sritu_hobby I see every thing but the code link??
where is the code sir
srituhobby.com
Pls provide code for this project
Please visit the video description
Plzz send me code are code link
Srituhobby.com
code..?
Link in the description
Where is the program for this project
srituhobby.com