Hey Steve I Love all of your videos I don't know about where you live but here in the USA we have the small hand is the hour hand and the large is the minute just saying 🤗💁
I love the clock I did not know you could use the pens like that as well I will have to try that with mine....and you seem to be having a bit of hard time with letters in the bloopers I just loved it all!!! you are my Master of Resin!
ooooh, I LOVE that.... ill be popping in ANOTHER amazon order right after this haha I ignored the laughter at the blooper , closed my eyes and imagine your vocabulary. haha - awesome, as always Steve x
Ah Fantastic... I just spent hours trying to paint my Christmas mold with acrylic paint and it was fiddly to do. I'll definitely give these a go on my next pour :)
lol at the point where he had to flip that thing multiple times to see if the letters were good I'd probably have elevated the glass panel at the sides and slide my phone with the selfie setting underneath. I love the idea of the resin clock and I just happened to have bought some posca pens so it is good to see that they can be used for resin.
Great video, loved the bloopers 🤣. I’m going to try a pour on an LP record to make a clock, will have to do a clear pour on the top. Not sure if I should put the numbers on before or after the clear pour. Might make two and see which I prefer xx
@@SteveMcDonaldArtsandCrafts You're welcome Im ok and hope you are well the covid cases here is getting higher I wont be shocked if we have to shelter in place again.
@@SteveMcDonaldArtsandCrafts Yes its a scary thing my pastor and his wife caught it and my pastors father died from covid over a week ago and they all were at a family reunion and I guess someone outside the family infected some of those there. I keep practicing the guidelines
I have this mold so I’m glad I watched you first a podcast pen is a great idea cos those no’s are tricky. By the way love glitter everything I do is glittery unless I’m specifically asked not to haha
I have that exact mold. I've always had watches with Roman numerals since I was a teenager that was a loooooooong time ago 😳 I love the idea using the posca pen? Saves resin. Do they come in other colors? I've never heard of those. Instead of the tiles for the word " FOR " since it seems a bit cramped because of the middle piece obscuring the word a bit; what about painting an arrow from the center pointing it's way to the number IV (4) for / four 😁 ? Or easier still you could turn a tile upside-down and draw a 4 on it. Anyways many thanks again for a great video love your work hugs from Quebec Canada 🫂
Nice, next time to keep the swirls in the resin don’t swirl it. Wait until the resin starts to cure on ur project till it’s the consistency of peanut butter. Then when the piece is completely cured it will have the same swirls
Time for resin I can see, I will pass on the gin though. I was hoping those beautiful swirls you made with the purple at the end would come through, but they didn't seem to do so.
In the US I’ve found ClockParts.com to be a very good source for good prices and most selection of stem lengths and hands. Also only ones I’ve found with clear acrylic clocks in different stem sizes.
I’m struggling using the posca makers on one of my molds the ink dries up & disappears in seconds do I have the wrong kind or am I doing something wrong? it’s so frustrating. Thank you love your videos
To check the placement of the letters, I thought you were just going to lift up the Perspex and look at it from underneath, rather than trying to clamp it with a notebook and flip it over. Could have worked out easier!
A really nice project! I’m curious. I’m not very familiar with Posca markers. Why do you use them? Is it because you color the mold itself and then the color completely transfers to the resin and leaves the mold clean? Would sharpies react differently? Thanks in advance.
Hey I noticed you weren't wearing your gloves when you were putting the tiles in. not trying to be a smart arse but should you have been? Like seriously lol. Like when exactly is the resin potentially dangerous? I'm a noob and I'm just trying to figure everything out
Hey Steve I Love all of your videos I don't know about where you live but here in the USA we have the small hand is the hour hand and the large is the minute just saying 🤗💁
I love the clock I did not know you could use the pens like that as well I will have to try that with mine....and you seem to be having a bit of hard time with letters in the bloopers I just loved it all!!! you are my Master of Resin!
😃👏👏👏👏 beautiful clock! Great idea to paint the numbers in tne mold instead of painting them on the finished piece. Have a nice weekend!
Great tip for getting letters right. I’ve stuffed it a few times & wondered what to do. Thanks Steve
Thanks for showing the bloopers.
ooooh, I LOVE that.... ill be popping in ANOTHER amazon order right after this haha
I ignored the laughter at the blooper , closed my eyes and imagine your vocabulary. haha - awesome, as always Steve x
@@SteveMcDonaldArtsandCrafts lol, I do love you mr
🎉These markers would be great for the little mold that makes the celestial star charts. 😊
Love the bloopers,soo funny!! Clock is great,except hate gin. I wonder how hard Margaritas would be? Pretty large clock 🤣🤣💕
@@SteveMcDonaldArtsandCrafts ooh,yes to Jameson whiskey hahaha good job you always do!!💕
Awesome, thank you Steve.
Ah Fantastic... I just spent hours trying to paint my Christmas mold with acrylic paint and it was fiddly to do. I'll definitely give these a go on my next pour :)
Lovely purple looked darker after the pour! Love the blooper 😘😂
perfect glad to know posca markers work on the details thank you :) i think i would prefer this method more
I always do a thin pour first, especially with moulds that have a sharp point like crystal clusters or an indentation like this one.
lol at the point where he had to flip that thing multiple times to see if the letters were good I'd probably have elevated the glass panel at the sides and slide my phone with the selfie setting underneath. I love the idea of the resin clock and I just happened to have bought some posca pens so it is good to see that they can be used for resin.
Great video, loved the bloopers 🤣. I’m going to try a pour on an LP record to make a clock, will have to do a clear pour on the top. Not sure if I should put the numbers on before or after the clear pour. Might make two and see which I prefer xx
Steve McDonald Arts and Crafts Thanks Steve I didn’t know that, I’m very new to resin xx
love your videos i am a newbie to this and i have learnt a great deal thank you
This is so awesome and fun. Thank you Steve for all you do for us.
@@SteveMcDonaldArtsandCrafts thank you. Creative new ideas can be hard to come by and I appreciate the ideas you come up with.
I want the mold there are endless ideas for it. TFS Steve
@@SteveMcDonaldArtsandCrafts You're welcome Im ok and hope you are well the covid cases here is getting higher I wont be shocked if we have to shelter in place again.
@@SteveMcDonaldArtsandCrafts Yes its a scary thing my pastor and his wife caught it and my pastors father died from covid over a week ago and they all were at a family reunion and I guess someone outside the family infected some of those there. I keep practicing the guidelines
The perfect clock Steve, nothing like a Gordon's Gin and Tonic. Love it :)
Thanks for the laugh from the bloopers!
Another great video, Thank you Steve 😊
Thanks Steve, I've got one on my wish list now :D
I love this idea great one Steve
I have this mold so I’m glad I watched you first a podcast pen is a great idea cos those no’s are tricky. By the way love glitter everything I do is glittery unless I’m specifically asked not to haha
Thank you!
Brilliant. Great blooper.
Great tips, thanks you! ❤️🌵✌🏻
Hi steve, love it, do you have a video as to how you actually create the mold itself. I want to try to create one myself. Thank you.
Thanks!! Needed this video!! 🙌🏾💜
Great job. I love it!!!💖💖💖
I have that exact mold. I've always had watches with Roman numerals since I was a teenager that was a loooooooong time ago 😳 I love the idea using the posca pen? Saves resin. Do they come in other colors? I've never heard of those. Instead of the tiles for the word " FOR "
since it seems a bit cramped because of the middle piece obscuring the word a bit; what about painting an arrow from the center pointing it's way to the number IV (4) for / four 😁 ? Or easier still you could turn a tile upside-down and draw a 4 on it. Anyways many thanks again for a great video love your work hugs from Quebec Canada 🫂
Nice, next time to keep the swirls in the resin don’t swirl it. Wait until the resin starts to cure on ur project till it’s the consistency of peanut butter. Then when the piece is completely cured it will have the same swirls
Time for resin I can see, I will pass on the gin though. I was hoping those beautiful swirls you made with the purple at the end would come through, but they didn't seem to do so.
In the US I’ve found ClockParts.com to be a very good source for good prices and most selection of stem lengths and hands. Also only ones I’ve found with clear acrylic clocks in different stem sizes.
Steve, I have a question. Can I use Arteza pens instead? I hate to buy another kind of pen if these artezas would work.
I’m wondering too !!
Very Nice💯😁👍🏾❤
I’m struggling using the posca makers on one of my molds the ink dries up & disappears in seconds do I have the wrong kind or am I doing something wrong? it’s so frustrating. Thank you love your videos
How do you get them to work on new moulds
You totally should have drilled a hole in the O tile in FOR and had the clock stem go through it. Then you could center all of the words.
You should keep this look you have in this video, head hair and facial hair; quite attractive. 😁😜👍
I have this mould but it seems to have a "dip" in it so my front is uneven. Any way I can fix that? Its a new mould I've only used once too.
@@SteveMcDonaldArtsandCrafts thanks Steve I'll give it a go 😀
Love it!!!
I bought a podcast pen, but when you use it, it is really dry scratchy and flakey, nothing really comes out. I’m out of ideas x
To check the placement of the letters, I thought you were just going to lift up the Perspex and look at it from underneath, rather than trying to clamp it with a notebook and flip it over. Could have worked out easier!
I love it x
Are there other paint pens that would work? Is it only water based that works?
was this epoxy resin or polyurethane??
how long did you wait for the posca to dry?
@@SteveMcDonaldArtsandCrafts thank you for the quick reply!
A really nice project!
I’m curious. I’m not very familiar with Posca markers. Why do you use them? Is it because you color the mold itself and then the color completely transfers to the resin and leaves the mold clean? Would sharpies react differently? Thanks in advance.
@@SteveMcDonaldArtsandCrafts Thanks, i didn’t know that. So in theory it can damage the molds, right ? “Anxious look” 🤣
I meant it can’t ? 😂
@@SteveMcDonaldArtsandCrafts I've been looking at paint markers, but didn't think Water based ones would be good because resin doesn't like water 🤔
😁💯👍🏾❤
Great clock! I’d have to change “gin” to bourbon 🥃🤷♀️😉
Im volunteering rum 😉
This is great. I love a gin while i resin!
Hey I noticed you weren't wearing your gloves when you were putting the tiles in. not trying to be a smart arse but should you have been? Like seriously lol. Like when exactly is the resin potentially dangerous? I'm a noob and I'm just trying to figure everything out