I took a trailor tire down to a Mexican guys tire shop and he showed me a trick and ones that won't seal,take a racheting strap and put around the center of the tire and rachet it till it seals then air it up.
Good thing I’ve been preparing by going to the gym for a year. I’ll be strong enough to just stretch the like you did I think. I didn’t know why I wanted to go to the gym but now it all makes sense. It was to change this tire!
@@dirtfootracing8788are these the 145/70-6 size? Do you happen to know the outer diameter once they are pumped up on the wheel? Looking for something a little taller than the stock ones, was hoping these end up being taller than 13" with those heavy lugs. Thank you, love your videos!
I never 👎 knew that popping a tire 🛞 bead would be so easy. These rims are mass produced, and usually not painted in the middle. I also find this on aluminum bicycle 🚴 rims, too. Ya want to watch for corrosion, especially on your rims. The Rust-Oleum is a great 😊 idea 💡. Ya should do it, if you’re running 🏃♀️ the tires 🛞 tubeless, and especially, if you’re going to use inner tubes. There’s nothing worse than corroded, or rusted rims. This literally fuses the tire 🛞 bead to the rim. In this case, it leaves 🍁 ya not much choice, other than to cut the tire 🛞 bead, or burn 🔥 the tire 🛞 to get it off. Sorry 😞 with all the emoji’s, I like 👍 to have a little fun 🤩 with them. Your friend, Jeff.
@@overlandtoshore That works well with one caution... Once the bead seals, take the strap off. The air pressure can cause that strap to give way and it will be with A LOT of force.
I took a trailor tire down to a Mexican guys tire shop and he showed me a trick and ones that won't seal,take a racheting strap and put around the center of the tire and rachet it till it seals then air it up.
I can’t express how the vice really helped another project accomplished thanks, brother man
They really went on easy - stay tuned I have a set of SunF Power.II 18x9.5-8 tires on the way
I can’t get my sunf tires on at all
How do you stretch the tire so easily🤯
Stronk
Warm temps and new stretchy tires
Stump
Seriously. His tire is gummy stretchy and mine is made of mithril.
Good thing I’ve been preparing by going to the gym for a year. I’ll be strong enough to just stretch the like you did I think. I didn’t know why I wanted to go to the gym but now it all makes sense. It was to change this tire!
Yeah good luck jus tried and about popped a damn blood vessel 😂😂
Need to do this without scratching them . Just had them powder coated
Going to give this a shot tonight. Thanks for the video, gives me hope I can pull it off!
You can do it....
@@dirtfootracing8788are these the 145/70-6 size? Do you happen to know the outer diameter once they are pumped up on the wheel? Looking for something a little taller than the stock ones, was hoping these end up being taller than 13" with those heavy lugs. Thank you, love your videos!
Hey man I’m just a kid right now and I have a Baja warrior and I’m getting the same tire but for my back wheel was a pretty good bud keep it goign
Leave the valve core out to seat the bead, then put it back in and air it up.
man its a pain to get these stock tires off the rims theyre hella tight
I put mine on the ground and stand on it pops right on
That must be some soft rubber. Mine are like concrete the rubber is so stiff
Those beads were easy to break bud great information video brother heck ya
You the man thank you i just got mine done.
Glad it helped
Alright so basically you need to acquire dad strength in order to complete it
I never 👎 knew that popping a tire 🛞 bead would be so easy. These rims are mass produced, and usually not painted in the middle. I also find this on aluminum bicycle 🚴 rims, too. Ya want to watch for corrosion, especially on your rims. The Rust-Oleum is a great 😊 idea 💡. Ya should do it, if you’re running 🏃♀️ the tires 🛞 tubeless, and especially, if you’re going to use inner tubes. There’s nothing worse than corroded, or rusted rims. This literally fuses the tire 🛞 bead to the rim. In this case, it leaves 🍁 ya not much choice, other than to cut the tire 🛞 bead, or burn 🔥 the tire 🛞 to get it off. Sorry 😞 with all the emoji’s, I like 👍 to have a little fun 🤩 with them. Your friend, Jeff.
leaves 🍁 lmao
Wth. Is that a 1 ply or something. Mine are new and stiff as hell
Stand the tire up and bounce it around. That will seal it
145/7-60 tires fit on the stock monster Moto rim ?
What do you do when you dont have an air compressor how do you set the tire so you can pump it up
Get a big ratchet strap and crank the tire down. Should seat it on the wheel.
@@overlandtoshore wow it’s crazy how we all have the same knowledge. Dads did great 🙌🏽
@@overlandtoshore That works well with one caution... Once the bead seals, take the strap off. The air pressure can cause that strap to give way and it will be with A LOT of force.
Thanks you very good working 👍👍👍
Hey this is Elijah McGaugh i need a 145:70-6
I’m having a hard time breaking the bead you got any tips
Sweet
Do I need sealant around the tired to put the new tires on.?.
No sealant needed. Just as long as the rim is clean
Question, When you ordered those tires, did the pictures for them show a different size tire? Thats what i'm experiencing
Cool now I wish I could put air in it
Thx fam. Ur video helped
i broke my finger trying this:(
Sounds like a skill issue 😂
I feel so bad for those rims...
Nice video. Where did you buy the tiers from? I’m in Canada
I believe I bought the tires from SUNFs web site
Hell yah man
Are these tires tubeless I didn't see a tube but there is a valve?
Yes they are tubeless
Do you put a inner tube in it ?
Tubeless
How do those sunf tires hold up against goat heads ( sharp spikes thorns)?
We dont have much of that (spikes and thorns) here in FL. They excell in mud and loose soil.
@@dirtfootracing8788 thanks for the reply im gonna try some of these tires out
Do you prefer tube or tubeless
Tubeless
What size tires are those? And what website did you get them off of?
sun f tires
this is literally impossible
i’m am sweating so hard in my room because i have tried to get the other half on and made no progress i have sweat dripping on the floor
Might want to work on your Mounting technique a lil bit more ,Before you show others....c'mon
He did great, let’s see your technique clown
He did put the tire back on tho, wouldn’t say is technique is bad
He's not a fucking tire machine
Coming from the guy that prolly watches the tire tech change his