How to adjust uPVC front door hinges left to right

Watch as we show you how to adjust a uPVC door hinge from left to right to get a better fit in the frame.
Tools Needed: 4/5mm Allen Key
Read full instructions on how to adjust a uPVC door for a better fit and to stop draughts:
www.everest.co.uk/doors/upvc/...

[@brianhutchison1788]

Short & to the point. At last! A five minute job that actually took 5 minutes...& that included watching your video! Thank you!

[@russellthompson2507]

Straight to the point, so often the narrator describes the colour of the door, where he bought it from , how long it took him to save up etc

[@jadejones2488]

Straight to the point, sorted my dropped door, which prevented me from locking it, in 10 seconds. Thanks

[@EverestHomeImprovements]

Thank you, glad to help!

[@DanielTwigg]

Saved my life, I had been trying to move the door UP with the bottom screw but this is the video I needed, thanks so much.

[@1real11]

This is the same flag hinge as my b&q door, there's no need to remove the cover as with other doors, just remove the little cover for the allen key access

[@darinh1]

Thanks for the help. Great easy to follow instructions.

[@garethlloyd4716]

Avsoloute legend! My door was dragging along the bottom small problem I tried folding and made it a lot worse but didn’t even see those Alan key there that’s all it was! All sorted now massive thanks

[@verondelta2]

Saved me a lot of hassle, great video.

[@jeffjeffjeff2]

Brilliant video, thanks very much. My hinges were slightly different in that the left to right adjustment wasn't via the hidden Allen bolt, but on the top and underside of the hinge where it meets the frame. The Allen key shown in the video adjusted the vertical height of the door but you can figure this out by going slow and measuring the gaps. Thanks again

[@EverestHomeImprovements]

Glad it helped

[@alansutton2980]

Best explanation on how to adjust the hinges on CZcams, thank you.

[@EverestHomeImprovements]

Thanks for watching!

[@Techn1976]

Thank you so much!

[@philipleigh]

He didn't say remove cap first in order to loosen the screws. You can't make adjustments without first loosening them.

[@louiestone7862]

Thanks so much! Wish I'd soon this sooner 😂

[@andygoodlad8789]

Thankyou very much 👍

[@amrendrasharma6370]

Hi sir today i am fixed this hinges hope your looked video😆 from india delhi

[@EverestHomeImprovements]

Great 👍

[@harryboy3840]

U r awesome buddy!! Cheers

[@EverestHomeImprovements]

Thank you!

[@Faris0802]

Is it normal to keep adjusting every couple of weeks if not what would be the alternative besides buying a new door? Thanks

[@marklee519]

I have Nexus door hinges on my UPVC back door . I need to lift off the back door to get my new sofa in . Please can you tell me or show me how to lift off the door out completely disassemble in the hinges . I can't find any videos on fixing or fitting or Nexus flag hinges ?

[@droidtv2871]

Any way to change opening direction from left to right. I am okey to handle become upside down

[@TheTrueKailash]

thanks

[@EverestHomeImprovements]

No problem

[@Silentaudits7]

My main opening door has dropped a tad, catching on the bottom frame slightly on a hot day when it expands a tiny bit ,3 hinges ..T M and B. do I need to adjust all three to square it ? and to lift the bottom do I screw in or out ? I would appreciate any advice . Thanks .

[@Jimmynuts1]

Start from bottom, remove cap screw, take off cap - Adjust slightly the bottom with Allen key - you can see a difference. Then move onto middle and do the same. You may need to do all 3 (as maybe all three are dropping).

[@j1m909]

I can't get the cap out!

[@svaigagalja]

Hope he is not doing this for money. Cause very very light version of minimal adjustment

[@alidawatters2879]

Thank you so much!