Branson 2500 L with Kranman T1750 trailer
Vložit
- čas přidán 5. 09. 2024
- Branson 2500 L with a Kranman T1750 Gripper truck leads a flexible and easy-to-drive forest crew. This is because the tractor has a full 40 cm of ground clearance and the trailer has frame steering and drive.
More info can be found at: bransontractor...
The Branson 2500 L is a smooth and easy-to-drive tractor. It is also available as 2500hL, which means that it has hydrostatic drive.
Both of these models are delivered with a roll bar as standard, cab is not available. However, there is a windshield and roof as an accessory.
Two variants of transmission, manual transmission or hydrostat. The manual variant has 3 forward gears and a reverse gear. In addition, it has a high / low gearbox, so a total of 6 gears forward and 2 gears backwards. Ordinary traditional coupling.
The hydrostat version has an accelerator pedal for forward travel and a pedal for reverse travel. Clearly marked direction of travel is in the pedals. The tractor also has a high / low gearbox. The more you push the pedal down, the more speed and speed the engine increases, you do not need any base gas. Very comfortable and easy to drive. Cruise control is available to conveniently lock the speed when desired.
The four-wheel drive is engaged mechanically via a lever. All control levers are located on the right and left screen respectively. No levers on the flat floor which facilitates getting on and off. Power steering and good turning angle make the tractor easy to maneuver and handle in tight spaces. Another feature that the 00 series has is the excellent ground clearance, a full 40 cm. Quite unique for such a small tractor. This has made the tractor popular for forest driving. We also have forest packages that protect the tractor extra for driving in the forest. A popular forest trailer is the Branson 2500 together with the Kranman T1750 4WD grapple truck.
Front loaders are available as accessories, equipped with Euro tool holder, support legs and parallel guide. Lifts as a maximum of about 640 kg. To think about when it comes to lifting power. When, for example. uses pallet forks and moves the weight far in front of the front axle, reducing the lifting capacity. You should also use some type of counterweight or implement at the rear connected in the three-point linkage. This gives the tractor a much better balance and more pleasant to maneuver when working with the front loader.
Comprei um 2500l e tem uma boa qualidade de força 😂