Vamoose Elevating Roof Installation

Sdílet
Vložit

Komentáře • 144

  • @mrstrong5695
    @mrstrong5695 Před 4 lety +4

    I am seriously impressed with this pop top and the obvious expertise the fitters have. What a product!

  • @eduardocastellanos9197
    @eduardocastellanos9197 Před 2 lety +2

    Had this exact same idea for my VW Vanagon. Hope my DIY fits like a glove like yours.

  • @peakpanther5136
    @peakpanther5136 Před 7 měsíci

    I have had my Vamoose pop top now for 15 months and couldn't be happier. It is not the flashiest with no panoramic zips or multi windows and one colour fabric choice. What it is though is belts 'n' braces and bombproof ! They have been making them for years, it is tried and trusted. It laughs at bad weather and rain!
    I love the neatness of the internal gas struts and the simple st-steel hinges to the rear ( no stupid bungee needed here to stop catching in the scissor hinges ). I have extended the bed board and now have 2.1 metres bed length in a swb T5.1.
    They had my van for 2 days and fitted the colour matched pop top, deluxe bed board, diesel heater, Vamoose awning rail and new rear window. I also bought their bespoke internal thermal liner for winter use. And my van had furniture and a RIB bed already installed. Others didn't want to know. Vamoose just got on with it. Decent price too. Highly recommended!

  • @strictlystreet1517
    @strictlystreet1517 Před 7 lety +17

    That was cool 😎. Always wondered how the process went

    • @team3383
      @team3383 Před 7 lety +3

      Absolutely perfect. I can now make one myself and fit it to my van.
      Just have to make an aluminium frame with corner reinforcements and strengenthing bars at front and rear for it.
      Thats just saved me a pretty penny.

  • @mysteriousbigboy6744
    @mysteriousbigboy6744 Před rokem

    These guys are so efficient and experienced; making it seem so simple.
    Would definitely consider them for any project relating to van space utilisation and customisations.
    I am very curious about a rough estimate on how much does this process cost ?

  • @jimmyscudder3978
    @jimmyscudder3978 Před 7 lety

    very nice video fellas, you made it look so easy

    • @peymimor
      @peymimor Před 6 lety

      *Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r

  • @maharishi9111
    @maharishi9111 Před 4 lety

    Nicely done.
    Now I 'm Liking and Subscribing and Belling.

  • @mikesimmonds1916
    @mikesimmonds1916 Před 8 lety +5

    What prices do you charge for the install? We have a solid T4 which could benefit from more height.

  • @Frida-K.6986
    @Frida-K.6986 Před rokem +1

    look like easy, but its so difficult to do ! great ! good and incredible job!

  • @juanantonio674
    @juanantonio674 Před 4 lety

    Genial saludos cordiales desde Patagonia Chile

  • @eclipseks
    @eclipseks Před 7 lety +2

    I would love to install on my fj60 here in the US!

  • @sharonlieding7048
    @sharonlieding7048 Před 2 lety

    Just wondering what tool you used to remove that roof because I have to do that on a vintage camper I have.

  • @uber2tuber
    @uber2tuber Před 2 lety +3

    What tool did you use to make the initial cuts in the roof? Thank you.... this is freaking awesome!

  • @sergioperezr
    @sergioperezr Před 6 lety +1

    That was a nice installation, good job.

    • @nicotristan6119
      @nicotristan6119 Před 2 lety

      I dont mean to be offtopic but does someone know a tool to log back into an Instagram account..?
      I stupidly lost my login password. I love any tricks you can offer me!

    • @graysonstetson7784
      @graysonstetson7784 Před 2 lety

      @Nico Tristan instablaster ;)

    • @nicotristan6119
      @nicotristan6119 Před 2 lety

      @Grayson Stetson I really appreciate your reply. I got to the site on google and Im in the hacking process atm.
      Seems to take quite some time so I will get back to you later with my results.

    • @nicotristan6119
      @nicotristan6119 Před 2 lety

      @Grayson Stetson It worked and I actually got access to my account again. Im so happy!
      Thank you so much you saved my ass :D

    • @graysonstetson7784
      @graysonstetson7784 Před 2 lety

      @Nico Tristan no problem :D

  • @vamoosecamperconversionltd5598

    Hi Lucas
    Just like to clarify something with you , this video was taken by one of our customers around 7 years ago , it has obviously been edited as the part where we TRIPLE seal all the frames and paintwork is not shown , I have been building camper vans for almost 30 years and fitting our Vamoose roofs for nearly 12 years , we have installed 1000’s of these and guess what , no rust !
    I’d suggest you get your facts in order before you comment on things you have never seen and no nothing about .

    • @hacistein
      @hacistein Před 4 lety +2

      u shows everything but not the paint? this is not Lucas fault. this is big mistake to not showing it in this video, cuz u are amazing to do hard works like this. Well made 😁

  • @MarkosHaas
    @MarkosHaas Před 10 lety +4

    I'm looking to do exactly this to another van, and I have a question. After cutting out the roof, sheet and frame, what was that white frame made from that you set on top?

    • @peymimor
      @peymimor Před 6 lety

      *Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r

    • @livelongandprosper70
      @livelongandprosper70 Před 5 lety +7

      it was made from cheese

  • @miguelvalenzuela
    @miguelvalenzuela Před 8 měsíci

    amazing!! great work!

  • @awaiskhan-fe9xl
    @awaiskhan-fe9xl Před 5 lety

    Hi the roof you cut as same roof you used back to put on I want to know can you use same or buy another one

  • @j.a.b.9976
    @j.a.b.9976 Před 4 lety +2

    Do you ship the roof kit to the USA?

  • @saksak7491
    @saksak7491 Před 3 lety

    สุดยอดที่จะเอาเป็นแนวทาง ทำหลังคา

  • @GaryTaylorvw
    @GaryTaylorvw Před rokem +1

    Hi, if van was originally lwb panel van, is it legal to cut the roof and install a pop top? Does it have to be checked by an engineer and inform dvla ?
    I’d love to do this but really don’t want to cut the roof just to have issues with police etc since all these stupid regulations have come in

  • @savannahwhitman2095
    @savannahwhitman2095 Před 5 lety

    Wow that was amazing, great work

  • @hunter17hmr
    @hunter17hmr Před 3 lety +9

    Do you guys not protect the bare metal edges, and holes that were drilled?

  • @francosubi1528
    @francosubi1528 Před 4 lety +3

    Is the structure very weakened after the process? i mean, for the road. Great job! Regards

    • @vamoosecamperconversionltd5598
      @vamoosecamperconversionltd5598  Před 4 lety +5

      No the van is as strong with our frame in as it was with the original roof , it has been structurally tested by the RDW in the Netherlands and fully certified for type approval.
      ( no such test is available in the U.K. hence it was tested in Europe )

    • @FunkMasterTex
      @FunkMasterTex Před 2 lety

      @@vamoosecamperconversionltd5598 is it possible to have one that opens the other way? Opening perpendicular to the length of the van rather than parallel?

  • @davidpribul6685
    @davidpribul6685 Před 3 lety +1

    werden die schnittkanten nicht gegen rost versiegelt? es wurde ledig kleber aufgetragen

  • @lorenzomiluso6474
    @lorenzomiluso6474 Před 2 lety

    What kind glue did you using ?

  • @obese1konobe
    @obese1konobe Před 7 lety +2

    Is the overall structure weakened by removing the roof cross beams. It's Difficult to imagine the aluminium frame providing any roll over strength compared to the original ?

    • @emmesessantotto
      @emmesessantotto Před 7 lety +1

      obese1konobe That's what I was thinking about too. I assume however, they have done some tests and have qc of that.

    • @junkname9983
      @junkname9983 Před 7 měsíci

      @@kristianszabo3817 held to sheet metal with rivnuts? are you kidding me? the frame might be strong but it'll get sheared right off if there's an accident and the vehicle ends up on its sides.

  • @andrewnuttall333
    @andrewnuttall333 Před 3 lety +9

    So what replaces the bracing from the roof for strength ie for stiffness of vehicle and if the vehicle turned over in an accident?

  • @lilikoctasetyawan
    @lilikoctasetyawan Před 4 lety +1

    Good job.. how much for nissan nv200 pop top roof

  • @diegocoiffeur1136
    @diegocoiffeur1136 Před 2 lety +1

    This is possible in renault kangoo or citroen berlingo?.

  • @ashleechan22
    @ashleechan22 Před 3 lety +1

    I GOTTA HAVE ONE. How much and where is this???

  • @antn8387
    @antn8387 Před 3 lety +2

    looks great, but IMO, y'all should still use the section of the roof you cut off to convert into a removable roof bed.

    • @br4d101
      @br4d101 Před rokem

      Pretty sure they installed the roof bed!

  • @danstaszko6930
    @danstaszko6930 Před 7 lety +7

    how is the roof re enforced sence you took some of the supporters out?

    • @badams9854
      @badams9854 Před 5 lety

      Dan Staszko 💪💪
      If a high strength LEXAN, Kevlar, & Carbon Fibers were properly constructed, that portion of the vehicle should be much Much lighter weight & stronger then the original sheet metal. Similar to an air craft canopy. Strong & visible

  • @mjelkin89
    @mjelkin89 Před 2 lety

    Hi I’m thinking of getting this done to my lwbT5, there are so many manufacturers of the pop tops, out there, what is the name of this one just reviewing all of them before I go ahead
    Many that

  • @ashokmnagaral1133
    @ashokmnagaral1133 Před 4 lety

    In 4 minute 36 seconds The VamOOSE let LOOSE their trade secrets ;but they GAIN APPLAUDS from those who can afford only DIY in all other parts of world ! Great DECODED VIDEO on making pop top!

  • @jeremiahresurreccion2350

    What kind or brand of sealant did you use to glue that pop top frame to the steel roof?

  • @leektid4624
    @leektid4624 Před 10 měsíci

    What is that you use to cut the roof first ?

  • @christianbutcher828
    @christianbutcher828 Před 7 lety

    I noticed it's a ridged roof. How do you fill in the valleys to prevent water leakage? I saw you squeeze some kind of material in there, what was that? And was any other step to the process of making the valley's water tight?

  • @tronalddump2428
    @tronalddump2428 Před 4 lety

    Would it be possible to install a roof like this onto a larger van like a VW Crafter, so that only a part of the roof lifts?

    • @SergeyPRKL
      @SergeyPRKL Před 4 lety

      There is... just not on Vamooses list. I need one on a Sprinter.

  • @livinglifemyway7349
    @livinglifemyway7349 Před 4 lety

    Can you do that to a 2008 toyota sienna minivan?

  • @rosyortega3512
    @rosyortega3512 Před 9 dny

    i wish you were in mexico, so you make my van elevating roof, here in mexico there is nobody that makes those jobs

  • @lookexclusivo
    @lookexclusivo Před 4 lety

    Brasil 🤩

  • @timknox7943
    @timknox7943 Před 4 lety +1

    👍👍👍

  • @davidbarnett4483
    @davidbarnett4483 Před 3 lety

    Thats the way it should be a reinforcement frame when the roof braces are cut

  • @handymanjeff1
    @handymanjeff1 Před 9 lety

    Great video. These guys know what there doing!
    Let us know please where we can pick up a unit in the U.S.
    I bet there would be keen interest in installing your units on our vans here you know.

  • @user-starkot
    @user-starkot Před 7 lety

    SUPER!

    • @peymimor
      @peymimor Před 6 lety

      *Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r

  • @eriyasu2471
    @eriyasu2471 Před rokem

    Is it possible to do this on a T2 bay window from 1973 ?

  • @dianneharris2870
    @dianneharris2870 Před rokem

    I have a Rav4 Hybrid. Is it possible to raise the roof on it?

  • @tomcollins5377
    @tomcollins5377 Před 3 lety

    Can this conversion be used on any full size van?

  • @youtubecommentpolice2043
    @youtubecommentpolice2043 Před 6 lety +7

    The music is deafening

  • @michaelcunningham5907

    I'd love one for the ford transit. But I'd like it to pop up the opposite way

  • @peachtea3686
    @peachtea3686 Před 3 lety +2

    This is fast as hell, so why I gotta wait a year for mine??

  • @Outta12
    @Outta12 Před 2 lety

    How much does this cost?

  • @jrhamp
    @jrhamp Před 2 lety +1

    Is there anyone in the States that can do this. Thanks in advance. RH

  • @kalmus23
    @kalmus23 Před 7 lety

    very cool

    • @peymimor
      @peymimor Před 6 lety

      *Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r

  • @uzis4life
    @uzis4life Před rokem

    So sad to see that website in the end that they are located in the UK :(

  • @CosgroveNotts
    @CosgroveNotts Před 3 lety

    You can never have too much decent sealer

  • @CosgroveNotts
    @CosgroveNotts Před 4 lety +1

    Roof and body supports removed. Paint work not masked off. Metal not treated. Looks like it's done at my place with splash and dash fast fitter boys.

  • @idhamihdawala4750
    @idhamihdawala4750 Před 2 lety

    I need to raise my Suburban GMC roof
    Can it done

  • @waylonmartin9613
    @waylonmartin9613 Před 2 lety

    I need this done to my suburban.

  • @user-so8ne8hj1e
    @user-so8ne8hj1e Před 4 lety

    красиво конечно, ну а рамку крыши ,усиливать не надо что ли?

  • @zaidizubir2634
    @zaidizubir2634 Před 6 lety

    Can i install at my van ? Nissan vannette

  • @deanie557
    @deanie557 Před rokem

    But what about a design for a hardtop version? 🤔

  • @irakmarin4911
    @irakmarin4911 Před 2 lety

    On minute 1:59, what is the name for this part?

  • @mauricediggs8040
    @mauricediggs8040 Před 3 lety

    Name of the kit

  • @davidbernard7256
    @davidbernard7256 Před 6 lety +5

    Great Video but do something with the music!

  • @mi16t
    @mi16t Před 5 lety +5

    Didn't seal the edges of the cuts with paint! Rusty rusts!

    • @ed29011
      @ed29011 Před 4 lety

      There is a purpose made channel in the strengthening frame which is filled with bonding sealant. When the frame is fitted it seals the bare metal edges. After this the frame is sealed from the inside and then again from the outside. No chance whatsoever of any rust anywhere.

    • @SergeyPRKL
      @SergeyPRKL Před 4 lety

      @@ed29011 steel rusts even in air... this is why you paint even in dry conditions.

  • @mimi.w667
    @mimi.w667 Před rokem

    I like it but I would want it to go all the way up and I don't want the netting or anything just it to open all the way

  • @Kushal-xs3qo
    @Kushal-xs3qo Před 6 lety +1

    Awesome

  • @G4NoChallenge
    @G4NoChallenge Před 9 lety +1

    you guys should slow down a bit - you are going to have a heart attack! seriously though, excellent video and well made.

    • @peymimor
      @peymimor Před 6 lety

      *Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r

    • @youtubecommentpolice2043
      @youtubecommentpolice2043 Před 6 lety

      NoChallenge it's in fast forward lol

  • @reyjackson6941
    @reyjackson6941 Před 7 lety

    I been looking for a place here in the US so I can convert my 2008 scion xb . anyone?

    • @056561022
      @056561022 Před 6 lety

      OMG SAME. I don't have a van yet, but I wanted something like this, or something. Is there a company or branch in America that does this same thing?

    • @milk2percent416
      @milk2percent416 Před 6 lety

      Dude yes. My mom has this old mini van I'm gonna put a pop top on

    • @dolfoh6659
      @dolfoh6659 Před 6 lety

      Sportsmobile based in california and texas.

    • @livelongandprosper70
      @livelongandprosper70 Před 5 lety

      @@milk2percent416 of course you are ..looooooooooool

  • @monicacocchiaro6514
    @monicacocchiaro6514 Před rokem

    😮

  • @mikemcgln5049
    @mikemcgln5049 Před 5 lety +4

    music is not necessary

  • @champion007l4
    @champion007l4 Před 6 lety

    มืออาชืพสุดๆ บ้านเราพี่ไทย ทำได้เหมือนกัน แต่สภาพรถภายในนี้ เลอะกระจาย

  • @octaviaandrews7807
    @octaviaandrews7807 Před 3 lety

    I need someone to help me do this

  • @gavinfisher8049
    @gavinfisher8049 Před 6 lety

    Aluminium frame in replace of steel cross members . I would not trust it in aside crash.. crash tested??
    I think it's reimo that put in a STEEL sub frame when the original tin roof and cross members are removed.

  • @ZBwing
    @ZBwing Před 9 lety +1

    You didn't even attempt at masking or protecting any other part of the bodywork before you started cutting.

    • @Edge_Effect
      @Edge_Effect Před 7 lety +1

      That's the first thing I noticed, if they are not bothered about protecting the outer & internals of the van before cutting , makes you wonder if other corners are being cut when fitting. It doesn't take long to sheet up the outer bodywork and inners of the van to protect it from metal swarf\filings, a little extra care speaks volumes when a customer is looking for a converter to cut a big hole in their pride and joy. Come on Vamoose surely you are better than this?

    • @kristianszabo3817
      @kristianszabo3817 Před 7 lety +2

      Covering the panel for a simple cut is for people who intend on making a mistake.

    • @peymimor
      @peymimor Před 6 lety

      *Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r

    • @GyspyDave
      @GyspyDave Před 6 lety +1

      The trim ring covers any imperfections, and they did cover the seats ,so they are mindful of what they are doing , professionals, all the way ..

  • @Felix-bh3fu
    @Felix-bh3fu Před 5 lety +20

    Did not show in detail the most important: sealing between roof and frame ! The roof is not flat, the frame seems flat. Looked like they put silicone in the gaps, but just in there. Seeing only this, I bet it will leak :-(

    • @houseslosttribe1351
      @houseslosttribe1351 Před 5 lety +1

      I'd use Windshield adhesive or possibly a form fitting silicone seal w double sided 3m tape

    • @livelongandprosper70
      @livelongandprosper70 Před 5 lety +1

      yeah.. im pretty sure they know what they are doing you Bellend.

    • @kcajmortsnnew1488
      @kcajmortsnnew1488 Před 5 lety

      @@livelongandprosper70 pot calls kettle , rtc. it'll leak

    • @arenalife
      @arenalife Před 3 lety +2

      @@kcajmortsnnew1488 If you look later in the film they seal around the frame

  • @johnsondrapery
    @johnsondrapery Před 5 lety

    Kill the noise (music)

  • @humphry35
    @humphry35 Před 4 lety

    yep music was horrible,but the job is okay

  • @LMPlmp1
    @LMPlmp1 Před 4 lety

    In a few years - rust, rust, rust - with your installation

  • @yonihales9133
    @yonihales9133 Před 6 lety +7

    oh come on there is far more annoying music you could have used for a video

  • @demenagementspeedy
    @demenagementspeedy Před 6 lety +4

    music is so noisy...

    • @loudnessjr
      @loudnessjr Před 6 lety +3

      Medi Alexander turn your volume down you idiot

  • @outoftime788
    @outoftime788 Před 2 lety

    not gona show the finished product wtf

  • @joeboudreault4351
    @joeboudreault4351 Před rokem

    I am not impressed because I thought this would be a full roof pop-up rather than a half roof hinge job

  • @johanbehrens5923
    @johanbehrens5923 Před rokem

    l ml ml

  • @s-om6962
    @s-om6962 Před 5 lety +1

    Dumb music

  • @andrewmoon9576
    @andrewmoon9576 Před 9 lety

    you made a big mistake that will in years to come cost your customer dearly

    • @ZBwing
      @ZBwing Před 9 lety

      What was it?

    • @ekoms108
      @ekoms108 Před 8 lety

      +Zac Wingfield its a vw van lol

    • @ed29011
      @ed29011 Před 8 lety

      +andrew moon Hundreds of roofs over many years and no rust yet pal.

    • @ed29011
      @ed29011 Před 8 lety +7

      +andrew moon The profiled frame has a groove in the underside which is filled with sealant before it is dropped in. This coats any bare metal. The frame is then double sealed from the inside. Then triple sealed from the outside. Absolutely no way any metal will ever rust. Sometimes best not to talk about things you know nothing about.

    • @garrl007
      @garrl007 Před 7 lety +1

      I think they know what they are doing, rather that some 13 year old kid who can't even drive yet.

  • @markcole8436
    @markcole8436 Před rokem

    It's almost like a pick up truck tonneau cover backwards