this is easily the best review for this washer on youtube. there is so many people that don't know what they're doing or know how to maintain it that leave bad reviews on amazon. it's pretty simple... don't use garbage gas that's been sitting for months, use decent oil FOR the type of engine when you do an oil change every year, use a pump guard to prevent corrosion and to lubricate the insides between seasons and use a fuel additive for storage. that's about it. general rules for any gas pressure washer
After watching this video I ordered one of these a week ago,and it just arrived today!,and everything you mentioned was true and very well explained! 👍🏾
Just bought this unit and the recommended accessories from Amazon through your website. The extended warranty from Amazon has changed to $44 for 3 yrs.
Got my pressure washer you recommended and all the accessories. What a powerful machine. The surface cleaner does just the trick. Will never use to clean horizontal concrete surface without it. I am very impressed with the power. I have a 3500 psi with Honda engine that I have had for 10 or 15 years. It is too much of a hassle to use. Very heavy and cumbersome. Thanks for the recommendation.
It seems to me that Amazon has tripled the warranty coverage for 3 years as opposed to you getting the same coverage for 15. Having said that, my question is would you still purchase it from Amazon? Another great educational video sir. Keep em coming.
Hey Doc, great information. Thank you so much. I bought the same unit and had no idea how to get the soap pick up going. They didn’t put it in the manual/ wasn’t very clear. Tried the low pressure tip, and it worked. Thanks for calling Simpson for me haha.
I bought quick dis connects for all my water hoses. Makes life a bit easier. Just get two or three female ends for your hoses. Then get as many male ends for pressure washer, hose end sprayer and any other nozzles.i havnt had any issues .
After watching this video you finally got me to settle on a washer. I looked at Ryobi and Troy-Bilt, this one had really good reviews and you seem to like it so I went ahead and pulled the trigger on it yesterday. Should be here Sunday. Thanks for the videos and keep up the good work!
Thanks man, I just turned 16 and ice been looking into pressure washing for a job. Your channel has helped so dang much! I appreciate it a lot, I can tell you have experience, you cut the crap, and SHOW us how to do it. Thank you.
You could start with the one shown... then keep it as a back up unit. if you want to jump right into a bigger unit then this one. www.howtowithdoc.com/docs-product-links/commercial-grade-pressure-washers/
Great review! I do recommend you buying quick connect fittings for your hoses! You will have them on every hydrant and sprayer around the house as well!
Hi Doc. I was just looking at CZcams videos the other day because I was bored on a rainy day. I must have watched a half a dozen of your videos. Great job on presentation by the way. I didn't do my sidewalks or deck last year and the are looking filthy. So I just ordered from Amazon a new Simpson sprayer, the K Archer surface cleaner , longer wand, Zero G hose, & the other add ons. I can't wait for spring to get busy. I just had 250' of new cedar fence replaced and now have a better idea on how to maintain it. I'm 70 and hope this one will last the rest of my life.
Aloha Doc Awesome video on the Pressure Washer. Purchase on on about a year ago really love. It’s a GX 200 Honda engine pressure washer. Just bought a surface washer from Amazon.Just love this pressure washer
The ethanol issue is a issue with US gas only because regular octane pump gas has no stabilizers in it. The ethanol separates from the fuel in about a month and you're basically then trying to run your small engine on gasoline with no octane booster. So it basically knocks itself to death in short order. Most foreign countries import their gas so in order to ship it across the ocean they put stabilizers in it and the ethanol does not separate. It's basically the same as Premium pump gas in the USA. Of course my father had told me when I was young to always run premium in small engines to prevent knocking and damaging them so I never had any ethanol problems. I also add marvel's mystery oil to all my small engine gas to help de-carbon them and I don't remember the last time I had a plug go bad on a small engine, or a carb clog up.
Followed your advise got a 3000 psi 2.4 gpm with Honda motor mine came with the surface cleaner for sidewalks and used it the other day and was amazed love it for just over 400 bucks at lowes. Its a Simpson GCV 160. Thanks for the help. Also the green hose for the hook up I bought one also but got it at Walmart for like 5 bucks.
I use Tru Fuel in all my outdoor equipment. It’s sold at Lowe’s and Home Depot the premixed for edger, etc. has no ethanol in it so the shelf life is two years. For my mower and power washer I buy 5 gallons through a local outdoor equipment dealer. Since I have used it in my mower it starts on the first crank consistently. It’s a little pricey but worth it for me to save the headache of dealing with ethanol gas.
Mate, just call around some gas stations to see who carries non ethanol gas at the pump. You'd be surprised how many will have a single dedicated pump with non ethanol. I live east of Atlanta and pay $3.55 a gallon instead of buying Tru Fuel for around $20 a gallon. I run my mower and wood chipper on it.
Like all your videos, this one is just awesome! I ordered this machine and other items (off your Amazon link). The machine arrived today and I was able to get a little driveway washing done this evening. One thing I added to mine was quick disconnects (available at Lowes or probably just about anywhere and buy the paired male/female version). These make removing the hose a snap. Keep up the good work and I look forward to more videos!
If i want to run chemicals like bleach to clean sidings. Would i need to get a downstream injector? Please help me out. Just got this Pressure washer and don't want to mess it up
Hey Doc. Simpson MSH3125 (black Honda GC190)vs MS60921(Red Honda GC190).. other than a .1GPM and 100PSI difference between them what other differences set them apart? There is about a $50 difference in price but they're nearly identical.. what am I missing? I am considering the MSH3125 but for a 50 dollar save what am I not getting?
Great video. I watched this one plus your fence video and was hooked. Bought the Simpson from Amazon as recommended plus the gadgets that make cleaning more fun. Thank you!
Hi Doc, thanks for your great videos--they are VERY helpful. So at the 1:45 point you talk about "adding 3-4 year extended warranty" to the washer in your cart, but I don't see that option...?
Try some SeaFoam in the fuel before storage and also run some through a couple of times a year to keep the carb nice and clean. Have been using it in my 20 year old (South Florida) Honda push mower for years.
Hey doc question so I bought a pressure washer 3200 psi and I want to upgrade the hose but I can’t seem to find a good one and all I find is up to 3100 psi . Any suggestions please thanks .
We use our pressure washer as often in the winter as the summer since we live in the snow and get a lot of salt and sand, snow and ice, on the drive and in the garage. So it seems pointless to winterize. My $300 Excell was never cared for and it lasted 13 years before the pump went bad. Yes, I never even changed the oil. Since the pump seems to be the weak link then I didn't see much point taking care of the engine. Hopefully this unit will be as durable.
Hey man what to do ..I just bought one brand new .. And the thing wouldn't start with the choke pulled out ..it only would start with the pin pushed in.. Is this a problem.. Because it wouldn't do that semi start with the pin pulled out
I have a 4gpm pressure washer. The manual says to use a 50’ 3/4 water hose. I have a nice 75’ 5/8 hose. Do you think I’ll see a major difference in reaching 2nd story house with 3/4 50’ hose?
Hey Doc, I purchased the pressure washer you recommended on your website, from Amazon. Simpson MSH3125-S with Honda GC 190 Engine. When I got the unit I noticed that it does not have a fuel shut off valve. I called Simpson and they told me this model with the Honda engine has never had a fuel shut off valve. Not sure if you’ve ever ran into this before. Do you know if a fuel shut off valve can me installed without voiding any warranties. Or should I return this one and buy a different one… Any thoughts would be helpful.
Would painting the carb shield red with high heat resistant spray paint be advisable Doc? Expecting my SIMPSON PW tomorrow and your comments about this gave me pause since the ps3228 i purchased from Amazon is pictured as black painted like the engine and air filter.
Hello! I was wondering about the SIMPSON MegaShot 3000 PSI at 2.4 GPM HONDA GCV160 . Is that a good power washer to start a small business? Where I live I will be doing small bits of area not really full drive ways but it may come to that eventually.
What kind of fuel Is used ? Cause I heard normal gasoline is bad for these kind of engines and it also depending on the ethanol percentage or octane level . If someone could answer this for me
Doc, Great videos. But in your WHAT SIZE video, you said the ONE THING YOU REQUIRE is a fuel line shut off valve. Then in your SIMPSON REVIEW video, you reluctantly address that their unit doesn't include the fuel line shut off valve. I can see the pain in your endorsement as you search for a solution. Has Simpson fixed this deficiency? It's also notable that you address that Simpson's wand is too short, no attached reservoir for soap, the hose connector needs modifying and no surface cleaner. What pressure washer do you recommend that has the fuel shut off valve?
On engines with a gravity fed fuel tank a fuel shut off is desired. This is not a gravity fed tank on the GC190. This HONDA engine uses a fuel pump and the fuel doesn't flow without the engine turning over. There is no deficiency.
Hey Doc, I don't know if you're still monitoring this thread, but I'll take a shot at it. Based largely on your very informative and positive review, I bought this unit from Amazon about 18 months ago. Due to some remodeling and such, I didn't want to take it out of the box until I was going to be able to use it, so it got buried. About 3-4 weeks ago, I started it up for the first time and used it for about an hour in a trouble-free manner with great results. Today I got it out for a second time and was about 2 hours into a 3-hour project, when the motor just shut off as if I had used the kill switch, which I hadn't. My 24-year old son had been at the helm of a surface cleaner (Karcher 15-inch 3200 psi) and when I checked it out I noticed the main nut securing the spindle to the housing was loose. I wondered if that could've restricted flow enough to get the pump hot which in turn could've caused the engine to cut out. I asked my son if he noticed anything change that could've indicated reduced flow before it cut out and he said he didn't know for sure but he might have. I waited about 5 minutes and tried to start the engine again. It started and ran for at most 2 seconds and then cut out again. Successive cooler attempts have not gotten so much as a sputter, almost like there is no spark or no fuel. Being that I've only run it for 3 hours total on brand new gas and it never sputtered even once, I find it hard to believe that a clogged carburetor jet could be the culprit. Being a newbie at pressure washers - I don't know if I might've just gotten a lemon and I'm out the purchase price (I remember I was going to get the 3-year warranty, but I see no record of in the Amazon order details). Any thoughts?
Add more oil...... Hondas have a sensitive oil shut off and my guess is that it wants MORE oil. We always... OVERFILL our oil on the hondas. YES... oil pouring out of the fill cap. Try it first.
Doc getting ready to buy this or the upgrade . But have a question . In you're video the washer seems to be jumping around pretty good ( Moving ) when running. Is that the case and do both units ( Simpson) do so ?
Do you recommend any other pressure washer that has the idle down feature to make it quieter? I know gas pressure washers are loud but wondering if there is a good one that is quieter.
Love the video review. I have seen about 3 different of your videos thanks for all the info. One thing thought, the extended warranty is not $15 anymore hahaha is now $44.99. Still great video thanks
I have watched several of your video's and must say, they are very helpful and appreciated. I was hoping to see if you have had any luck with the Simpson Pressure washer with the turbo spray nozzle. When I went to order it, it says "up to 3,000 PSI" and as you know, the simpson is 3200. Not sure how I will get your reply, but hopefully you will see this and I'll figure out how to get the reply. Thanks again for the videos, all very helpful.
I have a older Generac, that when i first got it I never turn off the gas, and the next time i would go and used it, i would have to take the settling bowl off the barb and clean it out to get it started, but after a cpl times of that i turn the fuel off and run it out of gas, I been doing that for the past 8 or so years and it will start on the first or sec pull every time
Hi where did you buy the water outlet fittings to connect the waterhose to the pressure washer . i also purchased a simpson 3200 psi . thank you for the good review .
Swivel attachments I am getting a Simpson Pressure Washer based on your recommendation. I saw online that there are swivel hose attachments and guns available for pressure washers. Which of those units can I use? Like this one: "MTM Hydro Pressure Washer Gun with Built-In Stainless Steel Swivel Inlet and Nickel Plated Brass, High Pressure Spray Gun - 4,000 PSI" Also, I want a 50 ft hose length, can i get another 25ft. extension or have to get another 50ft. Hose?
2:22... my 3 year extended warranty was ~$200... (Simpson purchased from Home Depot)...I'm interested in seeing what they would honor or fix @ 3 years for $15 compared to 3 years for $200....
I bought this unit and like it, but beware, on the second time using it I was running it ,alone, and the wand hose got to close to the exhaust outlet and the hot gas melted the coating on the wand hose and a leak began to shoot out. I quickly shut off the unit! Keep the wand hose AWAY of the exhaust gasses which shoot straight out the side!
Thanks Doc, I purchased this power washer, good tip on the inlet hose extension. I purchased the Simpson surface washer and the 31" extension wand good products. I also bought a 50' 1/4" high pressure hose the 25' included hose just seemed too short. Thanks ? do you use the pump protector products?
Doc I purchased this unit and I am having issues with the 25 and 45 degree tips. They cut into the fence at the edges of the fan portion of the spray pattern. Do you recommend any tip brands? Could this just be the result of brand new tips? I see this issue even at 8-10" from the fence
Mike, when I back the wand off it does reduce the "cut in" into the fence... Issue with that is the fence does not get very clean. I'm thinking I should have followed my gut and purchased Doc's OLD Model... A Toro 2600 with the Honda Motor.
DOC I went to Lowes and purchased a new Surface MAXX Professional 40 degree tip $9.98...and problem solved. The orifice of the 40 Degree tip that came with the Simpson 3200 PSI washer is oval in shape and not round. Heck it wouldn't even remove dried bird droppings. I put the new tip in and I have ZERO cut in at the edges of the pattern. The difference in the 2 tips is night and day. Tomorrow I think I will go buy the 25 and 15 degree tips as replacements. I cannot express the difference between these tips and my wife suggested that I post a video to show the difference. I'll leave that business up to you...lol
Doc, just bought the 3200 PSI model, is it safe to use on vehicles? I'm afraid if I do it will strip the paint right off in the process! Anyone have experience with this?
Hey Doc, The image of the pressure washer appears to be broken and it won't take me to the link of the pressure washer. Im looking to purchase it but want to make sure im getting what you are recommending. Could you help me out please?
Amazon offers 2 - 3 year warranty on it. You have to select either one of them before purchasing it. I just got mine today with the 2 year warranty from amazon but 3 years is not $15 anymore.
Quick question: I noticed a few reviews discussing how this washer dances in a circle while running. Do you see this as a con? I saw your unit acting in the same manor.
Jokers Ride mp4l, OMG yes, this thing has serious balls. Just a heads up, with the “zero” tip on the gun you can actually cut into the cement if u hold it in on a spot for more than a few seconds. I sprayed an aluminum shed(ya know them flimsy-ish sheds they sell at Home Depot or Craftsman, ahh I mean Lowes😝) and dented it all up. It’s a ton of power all directed into ONE lil stream with the “0” tip. Be careful, I really think you will have NO complaints unless your one of them people that bitch about EVERYTHING!
Hey Doc, +UCtpdUcJ3jBHxbkgUzRHuReg I have had issues unscrewing the OEM hose from the unit. I even ruined the first hose and Simpson sent me a replacement. I am having the same issue. The brace threads seem stuck. Is it normal not to be able to unscrew the OEM hose from the pump?
That extention for that washer your recommending has terrible reviews. I went ahead and ordered 1 for my own judgment. If it fails its going back so no biggie. I didn't know if you were aware.
this is easily the best review for this washer on youtube. there is so many people that don't know what they're doing or know how to maintain it that leave bad reviews on amazon. it's pretty simple... don't use garbage gas that's been sitting for months, use decent oil FOR the type of engine when you do an oil change every year, use a pump guard to prevent corrosion and to lubricate the insides between seasons and use a fuel additive for storage. that's about it. general rules for any gas pressure washer
Your video was the only video on CZcams that helped me setup my Simpson, thank you sir!
After watching this video I ordered one of these a week ago,and it just arrived today!,and everything you mentioned was true and very well explained! 👍🏾
Just bought this unit and the recommended accessories from Amazon through your website. The extended warranty from Amazon has changed to $44 for 3 yrs.
Got my pressure washer you recommended and all the accessories. What a powerful machine. The surface cleaner does just the trick. Will never use to clean horizontal concrete surface without it. I am very impressed with the power. I have a 3500 psi with Honda engine that I have had for 10 or 15 years. It is too much of a hassle to use. Very heavy and cumbersome. Thanks for the recommendation.
It seems to me that Amazon has tripled the warranty coverage for 3 years as opposed to you getting the same coverage for 15.
Having said that, my question is would you still purchase it from Amazon? Another great educational video sir. Keep em coming.
Hey Doc, great information. Thank you so much. I bought the same unit and had no idea how to get the soap pick up going. They didn’t put it in the manual/ wasn’t very clear. Tried the low pressure tip, and it worked. Thanks for calling Simpson for me haha.
I bought quick dis connects for all my water hoses. Makes life a bit easier. Just get two or three female ends for your hoses. Then get as many male ends for pressure washer, hose end sprayer and any other nozzles.i havnt had any issues .
After watching this video you finally got me to settle on a washer. I looked at Ryobi and Troy-Bilt, this one had really good reviews and you seem to like it so I went ahead and pulled the trigger on it yesterday. Should be here Sunday. Thanks for the videos and keep up the good work!
Same
Super instructional video. I really appreciate you taking your time and going over everything.
Thanks man, I just turned 16 and ice been looking into pressure washing for a job. Your channel has helped so dang much! I appreciate it a lot, I can tell you have experience, you cut the crap, and SHOW us how to do it. Thank you.
Could you recommend a commercial washer?
You could start with the one shown... then keep it as a back up unit. if you want to jump right into a bigger unit then this one. www.howtowithdoc.com/docs-product-links/commercial-grade-pressure-washers/
Great review! I do recommend you buying quick connect fittings for your hoses! You will have them on every hydrant and sprayer around the house as well!
Quick connect for the hose? Need to research
Hi Doc. I was just looking at CZcams videos the other day because I was bored on a rainy day. I must have watched a half a dozen of your videos. Great job on presentation by the way. I didn't do my sidewalks or deck last year and the are looking filthy. So I just ordered from Amazon a new Simpson sprayer, the K Archer surface cleaner , longer wand, Zero G hose, & the other add ons. I can't wait for spring to get busy. I just had 250' of new cedar fence replaced and now have a better idea on how to maintain it. I'm 70 and hope this one will last the rest of my life.
Aloha Doc
Awesome video on the Pressure Washer. Purchase on on about a year ago really love. It’s a GX 200 Honda engine pressure washer. Just bought a surface washer from Amazon.Just love this pressure washer
The ethanol issue is a issue with US gas only because regular octane pump gas has no stabilizers in it. The ethanol separates from the fuel in about a month and you're basically then trying to run your small engine on gasoline with no octane booster. So it basically knocks itself to death in short order. Most foreign countries import their gas so in order to ship it across the ocean they put stabilizers in it and the ethanol does not separate.
It's basically the same as Premium pump gas in the USA. Of course my father had told me when I was young to always run premium in small engines to prevent knocking and damaging them so I never had any ethanol problems. I also add marvel's mystery oil to all my small engine gas to help de-carbon them and I don't remember the last time I had a plug go bad on a small engine, or a carb clog up.
Followed your advise got a 3000 psi 2.4 gpm with Honda motor mine came with the surface cleaner for sidewalks and used it the other day and was amazed love it for just over 400 bucks at lowes. Its a Simpson GCV 160. Thanks for the help.
Also the green hose for the hook up I bought one also but got it at Walmart for like 5 bucks.
Can that thing remove paint from my wood siding on my house.
Huge help. Answers a lot of questions I had.
I use Tru Fuel in all my outdoor equipment. It’s sold at Lowe’s and Home Depot the premixed for edger, etc. has no ethanol in it so the shelf life is two years. For my mower and power washer I buy 5 gallons through a local outdoor equipment dealer. Since I have used it in my mower it starts on the first crank consistently. It’s a little pricey but worth it for me to save the headache of dealing with ethanol gas.
Yep... not a bad idea. We have 26 small engines at the shop ranging from 2.5 hp up to 12 hp, so we just use the sta-bil.
Mate, just call around some gas stations to see who carries non ethanol gas at the pump. You'd be surprised how many will have a single dedicated pump with non ethanol. I live east of Atlanta and pay $3.55 a gallon instead of buying Tru Fuel for around $20 a gallon. I run my mower and wood chipper on it.
I had no idea that non ethanol fuel was still sold at the pump. Thanks
A lot of gas stations have it for the landscaping trade. Also anywhere near a lake will have it for peoples boat engines, especially outboards.
Like all your videos, this one is just awesome! I ordered this machine and other items (off your Amazon link). The machine arrived today and I was able to get a little driveway washing done this evening. One thing I added to mine was quick disconnects (available at Lowes or probably just about anywhere and buy the paired male/female version). These make removing the hose a snap. Keep up the good work and I look forward to more videos!
If i want to run chemicals like bleach to clean sidings. Would i need to get a downstream injector? Please help me out. Just got this Pressure washer and don't want to mess it up
I just bought this amazing little pressure washer I’m about to start my pressure washing business 👍💯
I have 3 gas chainsaw used stabil never w out fuel 4 years +. spend. The money on fuel stability it's worth it long term
will this take the soap through the pump or bypass the pump, thanx
Have a lot of generators if add some lithium grease on the choke lever and grommet it passes through. Nice and smooth for easy start and idle down
Hey Doc. Simpson MSH3125 (black Honda GC190)vs MS60921(Red Honda GC190).. other than a .1GPM and 100PSI difference between them what other differences set them apart? There is about a $50 difference in price but they're nearly identical.. what am I missing?
I am considering the MSH3125 but for a 50 dollar save what am I not getting?
does the machine move a lot due to vibration i see it moving alot in the video ?
Great video. I watched this one plus your fence video and was hooked. Bought the Simpson from Amazon as recommended plus the gadgets that make cleaning more fun. Thank you!
E0 gas is amazing for my small engines that still have carbs, id fulley reccomened running it if you have boat gas or gas stations that sell pure gas.
3:07 misspeak, which is corrected later. This is a GC Honda engine, not the GX series.
Hi Doc, thanks for your great videos--they are VERY helpful. So at the 1:45 point you talk about "adding 3-4 year extended warranty" to the washer in your cart, but I don't see that option...?
Try some SeaFoam in the fuel before storage and also run some through a couple of times a year to keep the carb nice and clean. Have been using it in my 20 year old (South Florida) Honda push mower for years.
Hey doc question so I bought a pressure washer 3200 psi and I want to upgrade the hose but I can’t seem to find a good one and all I find is up to 3100 psi . Any suggestions please thanks .
We use our pressure washer as often in the winter as the summer since we live in the snow and get a lot of salt and sand, snow and ice, on the drive and in the garage. So it seems pointless to winterize. My $300 Excell was never cared for and it lasted 13 years before the pump went bad. Yes, I never even changed the oil. Since the pump seems to be the weak link then I didn't see much point taking care of the engine. Hopefully this unit will be as durable.
Hey Doc, How well does the surface cleaner work on an aggregate driveway? I have only seen videos on flat concrete driveways.
How does the quality of that OEM pump compare to the high strength aluminum pump Ryobi uses on their Honda with Idle Down pressure washer?
Hey man what to do ..I just bought one brand new .. And the thing wouldn't start with the choke pulled out ..it only would start with the pin pushed in.. Is this a problem.. Because it wouldn't do that semi start with the pin pulled out
I have a 4gpm pressure washer. The manual says to use a 50’ 3/4 water hose. I have a nice 75’ 5/8 hose. Do you think I’ll see a major difference in reaching 2nd story house with 3/4 50’ hose?
Yep that’s what I have too !! Thanks doc ❣️❣️ I also use sta-bil 360 ! But what oil do I use when I need to add?
Hey Doc,
I purchased the pressure washer you recommended on your website, from Amazon. Simpson MSH3125-S with Honda GC 190 Engine. When I got the unit I noticed that it does not have a fuel shut off valve. I called Simpson and they told me this model with the Honda engine has never had a fuel shut off valve. Not sure if you’ve ever ran into this before. Do you know if a fuel shut off valve can me installed without voiding any warranties. Or should I return this one and buy a different one… Any thoughts would be helpful.
Would painting the carb shield red with high heat resistant spray paint be advisable Doc? Expecting my SIMPSON PW tomorrow and your comments about this gave me pause since the ps3228 i purchased from Amazon is pictured as black painted like the engine and air filter.
Hello! I was wondering about the SIMPSON MegaShot 3000 PSI at 2.4 GPM HONDA GCV160 . Is that a good power washer to start a small business? Where I live I will be doing small bits of area not really full drive ways but it may come to that eventually.
What kind of fuel Is used ? Cause I heard normal gasoline is bad for these kind of engines and it also depending on the ethanol percentage or octane level . If someone could answer this for me
Doc, Great videos. But in your WHAT SIZE video, you said the ONE THING YOU REQUIRE is a fuel line shut off valve. Then in your SIMPSON REVIEW video, you reluctantly address that their unit doesn't include the fuel line shut off valve. I can see the pain in your endorsement as you search for a solution. Has Simpson fixed this deficiency? It's also notable that you address that Simpson's wand is too short, no attached reservoir for soap, the hose connector needs modifying and no surface cleaner. What pressure washer do you recommend that has the fuel shut off valve?
On engines with a gravity fed fuel tank a fuel shut off is desired. This is not a gravity fed tank on the GC190. This HONDA engine uses a fuel pump and the fuel doesn't flow without the engine turning over. There is no deficiency.
Hey Doc, I don't know if you're still monitoring this thread, but I'll take a shot at it.
Based largely on your very informative and positive review, I bought this unit from Amazon about 18 months ago. Due to some remodeling and such, I didn't want to take it out of the box until I was going to be able to use it, so it got buried.
About 3-4 weeks ago, I started it up for the first time and used it for about an hour in a trouble-free manner with great results. Today I got it out for a second time and was about 2 hours into a 3-hour project, when the motor just shut off as if I had used the kill switch, which I hadn't. My 24-year old son had been at the helm of a surface cleaner (Karcher 15-inch 3200 psi) and when I checked it out I noticed the main nut securing the spindle to the housing was loose. I wondered if that could've restricted flow enough to get the pump hot which in turn could've caused the engine to cut out. I asked my son if he noticed anything change that could've indicated reduced flow before it cut out and he said he didn't know for sure but he might have.
I waited about 5 minutes and tried to start the engine again. It started and ran for at most 2 seconds and then cut out again. Successive cooler attempts have not gotten so much as a sputter, almost like there is no spark or no fuel. Being that I've only run it for 3 hours total on brand new gas and it never sputtered even once, I find it hard to believe that a clogged carburetor jet could be the culprit. Being a newbie at pressure washers - I don't know if I might've just gotten a lemon and I'm out the purchase price (I remember I was going to get the 3-year warranty, but I see no record of in the Amazon order details).
Any thoughts?
Add more oil...... Hondas have a sensitive oil shut off and my guess is that it wants MORE oil. We always... OVERFILL our oil on the hondas. YES... oil pouring out of the fill cap. Try it first.
Have you ever used at MS60921 3300 psi 2.4 gpm Simpson pressure washer? Or would you still use your MSH3125?
Hey Doc! Great video I will definitely be purchasing this pressure washer. Does that soap tip have enough reach to access siding on a two story house?
Doc getting ready to buy this or the upgrade . But have a question . In you're video the washer seems to be jumping around pretty good ( Moving ) when running. Is that the case and do both units ( Simpson) do so ?
I have a generac and FIGHT starting every year! Is this one easy to start? Female friendly?
would you recommend this machine for jetting
Do you recommend any other pressure washer that has the idle down feature to make it quieter? I know gas pressure washers are loud but wondering if there is a good one that is quieter.
Hello
Where can I find the swivel snap fitting for the wand to prevent kinks
What is the attachment part # you added to the machine for easier access to hook up the hose?
Love the video review. I have seen about 3 different of your videos thanks for all the info. One thing thought, the extended warranty is not $15 anymore hahaha is now $44.99. Still great video thanks
I have watched several of your video's and must say, they are very helpful and appreciated. I was hoping to see if you have had any luck with the Simpson Pressure washer with the turbo spray nozzle. When I went to order it, it says "up to 3,000 PSI" and as you know, the simpson is 3200. Not sure how I will get your reply, but hopefully you will see this and I'll figure out how to get the reply. Thanks again for the videos, all very helpful.
Still happy with the pressure washer? Did you replace the stock pressure hose? If so, what brand? Did you eventually buy the fuel shutoff line?
Thank you for the great tips.
I have a older Generac, that when i first got it I never turn off the gas, and the next time i would go and used it, i would have to take the settling bowl off the barb and clean it out to get it started, but after a cpl times of that i turn the fuel off and run it out of gas, I been doing that for the past 8 or so years and it will start on the first or sec pull every time
Hey Doc how is this comparison to the Westinghouse 3200 psi pressure washer which also received excellent ratings?
So no chemical injector is necessary for downstreaming with this pressure washer?
I bought it off amazon, I had to pay 3 times the amount you stated FOR THE EX WArraNTY
Hi where did you buy the water outlet fittings to connect the waterhose to the pressure washer . i also purchased a simpson 3200 psi . thank you for the good review .
Hey doc I’m looking at the kohler Simpson. What do you think of it? Model 60763
Swivel attachments
I am getting a Simpson Pressure Washer based on your recommendation. I saw online that there are swivel hose attachments and guns available for pressure washers. Which of those units can I use? Like this one: "MTM Hydro Pressure Washer Gun with Built-In Stainless Steel Swivel Inlet and Nickel Plated Brass, High Pressure Spray Gun - 4,000 PSI"
Also, I want a 50 ft hose length, can i get another 25ft. extension or have to get another 50ft. Hose?
What was connected to your garden hose that you have in the video, was that some sort of attachment?
Is there a break time on the engine? Thanks for sharing your video
honda always make great products
2:22... my 3 year extended warranty was ~$200... (Simpson purchased from Home Depot)...I'm interested in seeing what they would honor or fix @ 3 years for $15 compared to 3 years for $200....
I just bought 1 & it surprised me on how quiet it is
Hi Doc, we planing to start new business.can you please give some advise what good and bad?
Hey Doc, the 3-year warranty is up to $45 - still recommend getting the warranty? I'll be buying one through your link soon...
Great Video Doc! Have you done a video yet on tuning your power washer up yet? I have the next step up Simpson and it's been great. Thanks
Great review video, ty --
can you adjust the pressure levels on this unit easily?
Nice video, is there an exhaust cover for this Honda motor to prevent the hot surface?
Great video.👍🏾
looks like a nice unit...the only thing I noticed is it vibrates so much that the wheels move around....otherwise, not bad
Yah saw that too. What say you, Doc?
Vibrates a little I guess, but really doesn't "move". I'd rather have a little movement and the 40 lbs light weight I guess.
how do you apply the soap? Is there a tank on it?
I bought this unit and like it, but beware, on the second time using it I was running it ,alone, and the wand hose got to close to the exhaust outlet and the hot gas melted the coating on the wand hose and a leak began to shoot out. I quickly shut off the unit! Keep the wand hose AWAY of the exhaust gasses which shoot straight out the side!
Thanks Doc, I purchased this power washer, good tip on the inlet hose extension. I purchased the Simpson surface washer and the 31" extension wand good products. I also bought a 50' 1/4" high pressure hose the 25' included hose just seemed too short. Thanks ? do you use the pump protector products?
Yes. Just a small squirt after I'm done with the nozzle pressed. Then pull the cord a few times.
whats happens if you run it with the choke on?
Is this a downstream chemical Injection?
I agree on putting the hand on top of the engine. I learned real quick! Its no lawn mower. hahahah
Doc I purchased this unit and I am having issues with the 25 and 45 degree tips. They cut into the fence at the edges of the fan portion of the spray pattern. Do you recommend any tip brands? Could this just be the result of brand new tips? I see this issue even at 8-10" from the fence
Mike, when I back the wand off it does reduce the "cut in" into the fence... Issue with that is the fence does not get very clean. I'm thinking I should have followed my gut and purchased Doc's OLD Model... A Toro 2600 with the Honda Motor.
Treat it with 30 second cleaner full strength. Wait 5 minutes... then wash off. Some "cutting" is normal, but should not be noticeable really.
DOC I went to Lowes and purchased a new Surface MAXX Professional 40 degree tip $9.98...and problem solved. The orifice of the 40 Degree tip that came with the Simpson 3200 PSI washer is oval in shape and not round. Heck it wouldn't even remove dried bird droppings. I put the new tip in and I have ZERO cut in at the edges of the pattern. The difference in the 2 tips is night and day. Tomorrow I think I will go buy the 25 and 15 degree tips as replacements. I cannot express the difference between these tips and my wife suggested that I post a video to show the difference. I'll leave that business up to you...lol
Doc, just bought the 3200 PSI model, is it safe to use on vehicles? I'm afraid if I do it will strip the paint right off in the process!
Anyone have experience with this?
Hey Doc love your videos butI don’t see any links
how is the unit holding up?
Ok 👌 😎thanks 🙏
I’m buying one like this one
Where is the link to the hose extension?
Hey Doc, The image of the pressure washer appears to be broken and it won't take me to the link of the pressure washer. Im looking to purchase it but want to make sure im getting what you are recommending. Could you help me out please?
We put up a new search result page instead. I have contacted Simpson as the exact model is not listed right now.
Ok, thanks! Do you know if they still have the one you purchased for around $370?
Waiting for a response from them.
Amazon doesnt offer 3 year extended warranty anymore :((( i just bought the unit after i watched ur video
Amazon offers 2 - 3 year warranty on it. You have to select either one of them before purchasing it. I just got mine today with the 2 year warranty from amazon but 3 years is not $15 anymore.
There's a similar looking Simpson with a Kohler RH265 motor. Is this Honda equipped one that much better engine wise?
Why not using ethanol-free fuel? I used ethanol-free fuel for all of my small engines.
Quick question: I noticed a few reviews discussing how this washer dances in a circle while running. Do you see this as a con? I saw your unit acting in the same manor.
will this model be strong enough to clean concrete around my pool?...thank you for another great vid
Yes, I'll be cleaning my pool soon and post a video. It's PLENTY strong enough. Use the surface cleaner.
Jokers Ride mp4l, OMG yes, this thing has serious balls. Just a heads up, with the “zero” tip on the gun you can actually cut into the cement if u hold it in on a spot for more than a few seconds. I sprayed an aluminum shed(ya know them flimsy-ish sheds they sell at Home Depot or Craftsman, ahh I mean Lowes😝) and dented it all up. It’s a ton of power all directed into ONE lil stream with the “0” tip. Be careful, I really think you will have NO complaints unless your one of them people that bitch about EVERYTHING!
Are u going to do fence pressure wash and stain video?
Yes....
Is it to clean a hot tub
Hey Doc, +UCtpdUcJ3jBHxbkgUzRHuReg
I have had issues unscrewing the OEM hose from the unit. I even ruined the first hose and Simpson sent me a replacement. I am having the same issue. The brace threads seem stuck. Is it normal not to be able to unscrew the OEM hose from the pump?
Make sure ALL the pressure is out... press the handle... also I spray mine with white lithium lube.
Gotta question, with the clear tube can you use bleach?
Use anything you want really.... as the intake is AFTER the pump.
@@HowTowithDoc thanks
That extention for that washer your recommending has terrible reviews. I went ahead and ordered 1 for my own judgment. If it fails its going back so no biggie. I didn't know if you were aware.