Lewmar Wavegrip Self Tailing Winch: Servicing and Pawls Spring Replacement.
Vložit
- čas přidán 24. 07. 2024
- Follow me as I service a Lewmar Self-Tailing One Speed Winch. The model is a Wavegrip 16. Some replacement parts can be found at www.P2-marine.com
The whole procedure and schematic is also available on my www.boatLUV.com blog
"Service Your Lewmar Self Tailing Winch"
Replacement Pawls Springs (small) were purchased from defender.com
Item No. 608826
Lewmar Winch Replacement Pawl Spring (1260/7) - Package of 20
$24.99 usd (Dec. 2021)
This may be a better option for you!
Includes grease and lube and springs!! I whole service kit!
www.defender.com/product3.jsp...|118|2358547|2358552&id=4707#
The exploded parts diagram can be found at
p2marine.com/lewmar-wavegrip-...
@TheDesertSailor
#winchrepair
#lewmarwinch
##thedesertsailor
find on IG @thedesertsailor and @boat_luv
shop at www.boatluv.com
Hello
Nice teaching, I made my Lewmar exactly as you.
Many thanks
the best ,clear and nice teacher.
Thanks for the support!
Nice work and great hints!
I'm glad it helped.
Absolutely excellent video. Really helped me with servicing my winches at the mast. It definitely kept the panic of pieces down to a minimum. Thanks a million ☺️
Thanks for watching. I am glad it helped you!
Nice video. One tip: Place some beach towels all around the winch when working on them to keep any parts which may fall from "bouncing " overboard. Another trick I have seen is to get a bucket and cut a hole in the bottom the diameter of the winch. The sit the bucket down over the winch while working on it. Any parts yo mishandle will stay within the bucket. lose
I sometimes use a shallow box. Will do so on my next video which is a simple winch.
I had another look at your post and tracked the diagram to the website. Thanks again
p2marine.com/lewmar-wavegrip-40-winch-parts
Thanks for video could not work out why little brass brackets would not go back in!
I hope it's all worked out now!
Great overview of the overhaul! I have the same model on my 89 Mirage 32.
Thanks for watching. I am glad it helped you!
My boat guru recommends mineral spirits to clean the winches. Acetone may attack the plastic parts..
Yes, that is my preference too! I used the alternative. Thanks for watching.
Can the tailer be located around the circle in any of four places or is there only one place it goes when reassembling? I mounted my winch and the tailer isn't pointed where I want it to be.
Thanks for posting this. I will use this as an excellent guide when I tackle the exact same winch on our 1985 Catalina 36 this weekend. Would it be possible to post the link for the exploded parts diagram? Cheers Kevin H
Gladd you find it useful!! I believe I did post the link in the description...
Can a non-self tailing winch that is just like your self-tailing be upgraded to self-tailing easily and is there a kit (Lewmar 14 or Lewmar 16)?
No I don't think one can "upgrade" but I'm not the expert so not sure!