I made a batter with a copper wire and an alumanum wire into salt water and it makes 0.8 volts so i think submerged batteries do better but its the same principle
Las problemas que podemos ver son :- 1/ el contacto al aluminio. Esto puede ser arreglado con uno de estos soldadores de puntos (spot welders) que usamos para baterías de litio 2/ El contacto al carbon. No se como puede solucionar esto pero un idea puede ser a pelar mas centímetros de cable y poner como un abanico sobre todo la placa. 3/ Corrosión. Aluminio y cobre en una medio conductivo debería resultar en corrosión rápido del aluminio. Creo que será mejor si las conexiones esta fuera del la celda, es decir que dejar una cola de aluminio fuera y conéctalo allí.
conecte 10 celdas en serie utilizando champo como electrolito, me arrojo 3.16V ; corriente : 34.4 uA el tamaño de la celda era 2Cm^2, quería saber si hiciste mas pruebas y saber resultados; me interesa el tema
Regular charcoal does not conduct electricity and thus, will not work. Even activated carbon needs to be mixed with graphite powder for it to work. Mixing regular charcoal with graphite powder and a binding agent also works, but will not give much current.
it does but it depends on what type, and activated charcoal will always have a higher surface area porosity etc which increases the number of charge holding sites in the material
@@kennethsitcharon4287 it's technically possible according to what i looked at from electrolyzing aluminium oxide back to aluminium but the problem is going to be the depositions of the aluminium. so this design? no. some other designs might be tho.
I made a batter with a copper wire and an alumanum wire into salt water and it makes 0.8 volts so i think submerged batteries do better but its the same principle
👌
Las problemas que podemos ver son :-
1/ el contacto al aluminio. Esto puede ser arreglado con uno de estos soldadores de puntos (spot welders) que usamos para baterías de litio
2/ El contacto al carbon. No se como puede solucionar esto pero un idea puede ser a pelar mas centímetros de cable y poner como un abanico sobre todo la placa.
3/ Corrosión. Aluminio y cobre en una medio conductivo debería resultar en corrosión rápido del aluminio. Creo que será mejor si las conexiones esta fuera del la celda, es decir que dejar una cola de aluminio fuera y conéctalo allí.
Углеродный электрод изготовляют склеивая каучуком углеродный порошок , графит на медную решетку ,сохраняя пористость для доступа воздуха
In 0:21 you should use "current" instead of "currency". Good job
McGyver Top
the problem of that are how long the life of electricity given and the life of material like the paper with a short life
conecte 10 celdas en serie utilizando champo como electrolito, me arrojo 3.16V ; corriente : 34.4 uA el tamaño de la celda era 2Cm^2, quería saber si hiciste mas pruebas y saber resultados; me interesa el tema
11th step..charging it !!
hola,gracias por tu trabajo
si hacemos una bateria como esa mas grande ,podria arrancar un coche?
Would regular powdered charcoal just work instead of activated charcoal I'm wondering
I bet so because here the carbon is not really doing much in terms of surface area. The advantage of surface area is limited by the aluminum.
But you probably need it to conduct, the salt does a good job at that probably.
I made one with regular powdered charcoal and it worked
Regular charcoal does not conduct electricity and thus, will not work. Even activated carbon needs to be mixed with graphite powder for it to work. Mixing regular charcoal with graphite powder and a binding agent also works, but will not give much current.
it does but it depends on what type, and activated charcoal will always have a higher surface area porosity etc which increases the number of charge holding sites in the material
voltage LOAD how mach (ampre?) ?
must take air no fold the carbon transfer oxygen need open air
not currency but current hahaha
🤔
Currency😰 current, it's currrent
HAHAHA
Is it possible to recharge ?
No, but aluminum oxide can be reversed to get aluminum back
I would say yes, it is a lead acid battery.
@@diorthotistm1621 and wheres the lead ans acid here, can you remind me ?
Air?
Das Salz lässt das Aluminium oxidiren also Luft denn es muss mit luft in Kontakt kommen das sorgt das salz
How I can recharge
Pls is it rechargeable?
it is not possible to recharge, the aluminum react with the air, corroding the material.
@@kennethsitcharon4287 it's technically possible according to what i looked at from electrolyzing aluminium oxide back to aluminium but the problem is going to be the depositions of the aluminium. so this design? no. some other designs might be tho.
Hey what with the No Audio ?come on man
No joks here ..lol
It's just capacitor not baterai
Low v
this is fake because is not a battery but is a super capacitor
yo mama baterrry when yo mama beat yo uyo get electrified ask yo mamaaaaaaaaaaaaaaa
Das ist vom Ablauf her, das schlechteste VIDEO was ich je gesehen habe.