Had my 14 r6 for 5 years and already put on an m4 y-pipe but left it stock exhaust. Just ordered the m4 street slayer. Also ordered the baffle in case uts a little too loud.
Thanks it was a beautiful bike unfortunately she is no longer with us anymore due to a girl driving and texting. She was ECU flashed through Bauce Racing had full exhaust system, air filter, sprocketed, and some other goodies. Ill eventually start uploading again have more R6's to show the world now.
nice brother yeah i took my baffle out. ran it as a slip on with stock headers and it was took quiet. now its a little to loud to be honest. but i can't find my baffle haha. Bauce flash should be standard with R6's really opens them up.
Funny story I'm going to end up making a full review of my bike i get lots of compliments/questions about it everywhere it goes. It has a custom exhaust setup. You are correct the M4 SS only comes in slip ons then they sell the full m4 system which is a full length can. Mine has Graves titanium race headers custom welded onto the M4 SS very unique sound. Im hoping to do a in-depth review soon. whenever i get free time from work.
This was a full system. Had headers then y then the tip. all 2 pieces. a y pipe eliminator will be loud but not as loud as full headers. full headers flow more air.
Carbon fiber tank cover? You mean the sliders on the side of the tank? They were custom made by a local business. You can buy them from Moto-D, Infinte, or a UK company on ebay. Beware of china ones.
Unfortunately man not gonna have that info came on previous bike and just swapped them over. And the right side is now crashed, if you want the left one you can come pick it up its on the house lol.
im editing a couple vids right now one of them has to do with the ecu. Do not go anywhere else besides Bauce Racing in New Jersey. Anthony Corbo is the man God invented to tune R6's. To any personal friend id advise only him. To anyone else do as y'all see fit.
Unfortunately it doesn't have one currently. I know tst sells ones that would fit it nicely only issue with the R6 is the wire for the light is all the way at the tip by the tail light. id have to run an extension down by the tire hugger or it wouldn't reach. Im looking into it for next season. Bike is 90% done will be making a walk around soon of all parts.
realistically no slip on will give it the full nice loud / performance sound that you're looking for. you need to do a mid pipe cat delete or a full header to get a loud sound then add which ever slip on you want. If you like shorty exhaust id say do the M4 street slayer like in this vid or the GYTR exhaust then just buy a MJS mid pipe and slap it together and you basically have a full exhaust.
R6-Forum got all my carbon fiber bits of some guy parting out his bike. If you buy it new its running you like $120+ 1carbontech I think is the brand. in a month or so ill be making a vid on the GYTR exhaust.
Test for gopro. Will do a full in detail vid later on bro. just wanted to see if the conversion format i used would reflect the sound well and its not bad but in person always better.
this was just a test for the go pro homie. my go pro unfortunately committed suicide and doesn't work. so switched to the go pro session. so will make a real walk around/ indetal video of the exhaust later on. just need to test out the formatting of the go pro no worries. subscribe and ill get you the vid you're looking for.
This bike looks ready to race, very well modified...
Your r6 is badass bro!
so fucking amazing bike i love it
Had my 14 r6 for 5 years and already put on an m4 y-pipe but left it stock exhaust. Just ordered the m4 street slayer. Also ordered the baffle in case uts a little too loud.
This was my first bike,bought it in 2017. Was stolen in 13 days after.
grate bike
Ur downshifts are great dude,how long you've had been riding motorcycles in this video?
Yo that license plate is sick! Do you have a video on how you did that?
i have the same boots!
Bike looks amazing. Did you tune it? Love the blacked out look.
Thanks it was a beautiful bike unfortunately she is no longer with us anymore due to a girl driving and texting. She was ECU flashed through Bauce Racing had full exhaust system, air filter, sprocketed, and some other goodies. Ill eventually start uploading again have more R6's to show the world now.
I got the m4 ss as well, just the slip on with stock headers and a BAUCE ECU flash. You took your baffle out or no?
nice brother yeah i took my baffle out. ran it as a slip on with stock headers and it was took quiet. now its a little to loud to be honest. but i can't find my baffle haha. Bauce flash should be standard with R6's really opens them up.
Yeah sounds good man. Way better than stock. You don't get any flames while downshifting do you? Or is your Ecu flashed?
Blue flames at night during down shifts or hard accelerations. Ecu Flashed by bauce racing greatest thing ever.
Sounds great man.You saying full system I thought M4 was only slip ons, is it a M4 header or a different brand ?
Funny story I'm going to end up making a full review of my bike i get lots of compliments/questions about it everywhere it goes. It has a custom exhaust setup. You are correct the M4 SS only comes in slip ons then they sell the full m4 system which is a full length can. Mine has Graves titanium race headers custom welded onto the M4 SS very unique sound. Im hoping to do a in-depth review soon. whenever i get free time from work.
do you have the "y" piping too as well with your M4 street slayer exhaust? the one that eliminates the "catalytic" converter?
This was a full system. Had headers then y then the tip. all 2 pieces. a y pipe eliminator will be loud but not as loud as full headers. full headers flow more air.
Whered you get thw carbon side tank cowl peices??
Nice bike, where did you get the carbon tank cover at?
Carbon fiber tank cover? You mean the sliders on the side of the tank? They were custom made by a local business. You can buy them from Moto-D, Infinte, or a UK company on ebay. Beware of china ones.
Chicago R6 hey man, what shop made them for you. I bought my bike with a dent and I was hoping to cover it with tank slider
Still looking for those lever guards...
Unfortunately man not gonna have that info came on previous bike and just swapped them over. And the right side is now crashed, if you want the left one you can come pick it up its on the house lol.
damn i like this color, what your instagram bro?
Sup dude, just wondering if you have a Power Commander 5 on that bby?
don't waste your money. It is flashed ill make an in-depth review of the flash and what it does etc.
did you send your ECU to that guy in Florida that flashes them with race tunes?
im editing a couple vids right now one of them has to do with the ecu. Do not go anywhere else besides Bauce Racing in New Jersey. Anthony Corbo is the man God invented to tune R6's. To any personal friend id advise only him. To anyone else do as y'all see fit.
What fender eliminator do you have?
TST industries really inexpensive and looks great. fits 06-16. Sorry for late replies been busy with life.
what about a light for your plate?
Unfortunately it doesn't have one currently. I know tst sells ones that would fit it nicely only issue with the R6 is the wire for the light is all the way at the tip by the tail light. id have to run an extension down by the tire hugger or it wouldn't reach. Im looking into it for next season. Bike is 90% done will be making a walk around soon of all parts.
I have the same bike it’s too quiet right now what slip on should I get?
realistically no slip on will give it the full nice loud / performance sound that you're looking for. you need to do a mid pipe cat delete or a full header to get a loud sound then add which ever slip on you want. If you like shorty exhaust id say do the M4 street slayer like in this vid or the GYTR exhaust then just buy a MJS mid pipe and slap it together and you basically have a full exhaust.
Where you get the seat cowl
R6-Forum got all my carbon fiber bits of some guy parting out his bike. If you buy it new its running you like $120+ 1carbontech I think is the brand. in a month or so ill be making a vid on the GYTR exhaust.
toce or m4 whats best?
i like m4 better to be honest more growl feels like
Sc
Toce sucks!!! All they are is noise and not even a real good one at tht!!!
such early shifts much low refs
Test for gopro. Will do a full in detail vid later on bro. just wanted to see if the conversion format i used would reflect the sound well and its not bad but in person always better.
dam thats hot yo where u live at bro
Poor visibility, can’t enjoy the video. Unless I enjoy
watching the ignition key. Otherwise it’s OK.
slow down bro i cant see shit ! make a new video do a proper walkaround please !
this was just a test for the go pro homie. my go pro unfortunately committed suicide and doesn't work. so switched to the go pro session. so will make a real walk around/ indetal video of the exhaust later on. just need to test out the formatting of the go pro no worries. subscribe and ill get you the vid you're looking for.
okay
ДУРАЧЕК какой скорость туда сюда дёргает 🤣🤣🤣