My 1.6 MPI Logan comes with Philips PSX24W bulbs 24 watts and I can't find them in the market after one got burned, do you know if it's ok to change the connector and use the H11 55 watts? I have a 15 amp fuse for the fog lights in the fuse box.
Hello, you cannot replace with H11 bulbs, the socket does not fit. Mandatory you have to put the PSX24W bulbs. To install H11 bulbs, you have to replace the projectors and change the bulb socket on the electrical installation. It's not worth the effort.
La descrierea clipului este un link. Acolo o sa gasesti link-ul unde vinde axscu tot kitul necesar pentru proiectoare. Nu pot pune aici un link, il sterge youtube
Întrebare pot lua suporți de proiectoare de pe bara de ph 1 sa pun pe bar MCV. Am cumpărat azi bara MCV nu a avut proiectoare și nu are suportul. Se pot da jos de pe bara veche pe bara noua
Salut amice. În mașina mea nu există curent electric la această priză la 08:24. Dar butonul are curent electric acolo, pur și simplu nu vine la această priză. Ai vreo idee? (Scuze pentru limbajul prost, nu sunt roman.)
Hi buddy, always translate into English, guaranteed the translation will be more successful. This time I could swear that someone from Romania wrote to me, the translation was impeccable. Check if there is fuse for the projectors, minute 13:12, bottom left 15A. If it is, the problem may only be with the block of lights.
@@tutorialelogan Thanks for such a fast reply man, appreciated it! I translated my language to romanian, in case if you don't know english. =) I checked fuse already, it's ok. But it's kinda late for me, even i did complete electrical installation for fog lights. Also what did you mean when you say "block of lights"?
@@bodyguardinizz The lever, from were You switch on/off lights, fog lights. Search on CZcams after "Curatat si gresat contacte maneta bloc de lumini", problem can ne from there
@@crististreulea nah man, lever is ok. i said in the first comment that i have electricity when i turned on front fog lights in lever and vice versa. just i couldn't get electricty to front socket. anyways; since i did a complete installation, this problem is kinda solved for me. But now i have new problem: When i turned on fog lights (which all of them are ok and running) the fog light amblem on the instrument panel doesn't show up. I tried to remove the dials and look for light, and its looks like ok. It's not very necessary but fine to have..
@@bodyguardinizz aaa, ok, from the first comment I didn't understand the lever, the text says "button" and from there the misunderstanding. Okay, I guess we're talking about a Logan 1, just to be sure. From the lever the wire goes to the fuse box, from here a wire goes to the socket projectors and on the route they added the second wire for the second projector. The electrical installation is very simple. If the current not reaches the plug under the bar, most likely the wire could be broken. I guess you solved it with a new wire down to the plug. Considering that you connected to those wires, you confirm to me that somewhere along the route that wire is interrupted because the LED from the dashboard clocks is also powered by it. It would be normal to pull another wire up to the hours corresponding to the wire corresponding to the fog LED.
Salut, absolut! Este mai complicat la tine pentru ca trebuie tras fir si in taboul de sigurante, led si rezistenta in bord, tot traseul pe care eu il aveam deja
My 1.6 MPI Logan comes with Philips PSX24W bulbs 24 watts and I can't find them in the market after one got burned, do you know if it's ok to change the connector and use the H11 55 watts? I have a 15 amp fuse for the fog lights in the fuse box.
Hello, you cannot replace with H11 bulbs, the socket does not fit. Mandatory you have to put the PSX24W bulbs.
To install H11 bulbs, you have to replace the projectors and change the bulb socket on the electrical installation. It's not worth the effort.
@@crististreulea Thanks
Am gasit in UK. 10-15 M.
bun . de unde pot procura clemele si suruburile de prindere proiectoare?
La descrierea clipului este un link. Acolo o sa gasesti link-ul unde vinde axscu tot kitul necesar pentru proiectoare.
Nu pot pune aici un link, il sterge youtube
Salut, lip-ul acela de sub bara din fata de unde ai luat? M-am uitat dupa ceva de genul pentru foarte mult timp
Salut, nou nu știu să-ți spun de unde. Din dezmembrări cel mai simplu
Dacă mă gândesc bine, s-ar putea sa am una pe acasă.
Caută un alt mod de a mă contacta, in scris, nu aici pe CZcams, să îmi amintești să o caut
Întrebare pot lua suporți de proiectoare de pe bara de ph 1 sa pun pe bar MCV. Am cumpărat azi bara MCV nu a avut proiectoare și nu are suportul. Se pot da jos de pe bara veche pe bara noua
Salut, sunt diferiți suporții, trebuie cumpărați alții.
@@crististreulea deci nu merg pus sa înțeleag
@@edymns4634 intelegi ce vrei. Eu iti spuneam ca iti trebuie alti suporti, sunt diferiti, nu potrivesc :)
Salut amice. În mașina mea nu există curent electric la această priză la 08:24. Dar butonul are curent electric acolo, pur și simplu nu vine la această priză. Ai vreo idee?
(Scuze pentru limbajul prost, nu sunt roman.)
Hi buddy, always translate into English, guaranteed the translation will be more successful. This time I could swear that someone from Romania wrote to me, the translation was impeccable.
Check if there is fuse for the projectors, minute 13:12, bottom left 15A. If it is, the problem may only be with the block of lights.
@@tutorialelogan Thanks for such a fast reply man, appreciated it! I translated my language to romanian, in case if you don't know english. =) I checked fuse already, it's ok. But it's kinda late for me, even i did complete electrical installation for fog lights.
Also what did you mean when you say "block of lights"?
@@bodyguardinizz The lever, from were You switch on/off lights, fog lights.
Search on CZcams after "Curatat si gresat contacte maneta bloc de lumini", problem can ne from there
@@crististreulea nah man, lever is ok. i said in the first comment that i have electricity when i turned on front fog lights in lever and vice versa. just i couldn't get electricty to front socket. anyways; since i did a complete installation, this problem is kinda solved for me. But now i have new problem: When i turned on fog lights (which all of them are ok and running) the fog light amblem on the instrument panel doesn't show up. I tried to remove the dials and look for light, and its looks like ok. It's not very necessary but fine to have..
@@bodyguardinizz aaa, ok, from the first comment I didn't understand the lever, the text says "button" and from there the misunderstanding.
Okay, I guess we're talking about a Logan 1, just to be sure. From the lever the wire goes to the fuse box, from here a wire goes to the socket projectors and on the route they added the second wire for the second projector. The electrical installation is very simple. If the current not reaches the plug under the bar, most likely the wire could be broken.
I guess you solved it with a new wire down to the plug. Considering that you connected to those wires, you confirm to me that somewhere along the route that wire is interrupted because the LED from the dashboard clocks is also powered by it. It would be normal to pull another wire up to the hours corresponding to the wire corresponding to the fog LED.
Salutare! Eu am Preferance Ph 2. Aș putea să îmi montez și eu proiectoare, în sensul că există sau ba instalația electrică montată din fabrica? Mersi
Salut, 100% vei stii doar daca verifici.
@@crististreulea ok,mersi de raspuns și promptitudine 😁👍
@@AlinAlinu80 cauti mufa de pe lonjeron, este cel mai simplu de verificat
as putea sa pun proiectoare pa un logan ambiance ?
Salut, absolut! Este mai complicat la tine pentru ca trebuie tras fir si in taboul de sigurante, led si rezistenta in bord, tot traseul pe care eu il aveam deja
@@tutorialelogan aha am inteles mersi mult pentru raspuns o sa incerc poate poate
@@tutorialelogansalut. Vrei sa spui ca trebuie tras fir la ceasurile de bord sau trebuie montat led în ceasuri?
@@caretefute cel mai probabil ambele
@@crististreulea da, ambele, am tras cablaj, se aprind însă nu am martorul în bord