4CH HDD MDVR/Mobile DVR&Camera Introduction(For fleet management and vehicle surveillance)

This video showing how Mobile DVR/MDVR works: including MDVR and spare parts introduction; connection introduction; configuration introduction through 3G/4G and WIFI to CMS. With this video, customers can operate our mobile dvr much more easier.
If you're interested in learning more, welcome to contact skype: christina-touch or whatsapp: [phone] to discuss more.

[@merlin1346]

very good instructions, good product.

[@mobilevehiclesurveillancea8517]

Hi, thank you very much! If you're interested in learning more, you can contact me at skype: christina-touch, or whatsapp: [phone]. Will you?

[@connerrhodes6542]

I like it

[@tconnections906]

How to reset the password if you forgot it?

[@pedroruizdiaz6530]

Well explained. I suppose you installed a keyboard too.

[@mobilevehiclesurveillancea8517]

At that time, yep

[@pijushsheet8770]

How to disable sleeping mode

[@mobilevehiclesurveillancea8517]

Hi, there is no sleeping mode for this mobile dvr.

[@ahamedraffi8783]

Where I have to buy this devices

[@eMMy5230]

on Aliexpress

[@mobilevehiclesurveillancea8517]

Please contact whatsapp: [phone] and mention you come from youtube, thanks!

[@garyfifield5858]

there are two versions one has an sd card storage and the other version has both a hard drive and sd card storage if want wifi and GPS you need to pay more money please go to eBay type in for sd card SW-0001a version and pleas get 4 pip aviation cable saves using a soldering iron For the hard version iTS HDD-mdvr and you need a set of 4 12 volt 2 WAY splitters EACH SOCKET AT THE REAR HAS A 12 VOLT outPUT. this is to connect the ahd cameras and you could connect other pieces of kit through that method as each socket at the back has12 volt output
How to connect an lcd screen
connect the lcd to socket one av YOU FIND THE DVR output this red on the dvr and tap it in yellow and find a suitable lead to connect to the LCD input in yellow then connect the 2-way 12-volt splitter to camera 1 socket to aviation 12-volt and connect camera one to the other end of the 12-volt splitter and connect cam1 output to cam 1
this to set UP the DVR indoors
IF YOU WANT ADD LEFT AND RIGHT VIEWS INSIDE YUOR CAR
TAKE THE 4 PIN AVIATION CABLE TO RED LAED OF 12 VOLT SPLITTER CONNECT YOUR CAMERA ON AV1 LEAD AND THE OTHER END OF 12 VOY SPLITTER TO YOUR LEFT LCD AND AD A 2 WAY VIDEO SPITTER AND PLUGIN THE LCD AND PUG IN THE THE CAMERA AND PLUG IN THE DVVR ON AV1 DO THE SAME FOR DVR AV4 SOCKET LEFT TO RIGHT VEWE
REAR AND FRONT PLUG AS NORMAL TO THE DVR
INSIDE CAR YOU WILL HAVE RIGHT AND LEFT VIEW AND YOU SHOULD HAVE THE HAD UNIT CONNECT HAVE ALL THE CAMERAS ON TH MONITOR AND HAVE INTERNAL CAMERAS SEPARATELY AND YUO CAN THEN TURN-OFF YOUR HEAD UNIT, YOU SHOULD THEN HAVE THE LEFT AND RIGHT INTERAL LCD SCREENS POWERED BY THE DVR AND BE ABLE TO LEAVE YOUR CAR SAFELY AND TURN THE THE OFF
TO POWER THE UNIT CONNECT THE YELLOW LEAD TO IGNITION ONTHE POWER CABLE THE RED LAED WITH FUSE TO TO AN AUXILIARY SWITCH AND ANOTHER BATTERY AND LEAVE TURNED ON AND PROGRAM THE DVR CONNECT NEGATIVE LEAD TO THE CAR BODY OF THE POWER CABLE
YUO NED TO WORK HOW TO TURN OF THE RIGHT LEFT LCDS YOUR NOW ABLE RECORD ANY PROBLEM IN TH NIGHT HOURS DEPENDING ON HOW LONG YOUR CHARGE LAST ON THE OTHER BATTERY
WARNING DIRECT CONNECTION TO YOUR MAIN CAR BATERY WIL CAUSE ENGINE STARTING PROBLEMS PLEASE USE A SPLIT CHARGE RELAY I HOP THIS USEFUL

[@usamamughal4385]

Tell me.price sir

[@mobilevehiclesurveillancea8517]

Thanks for your interest! Please inform your email address.

[@bandaandrew4431]

Dvr camera what's up me

[@mobilevehiclesurveillancea8517]

Pls contact WhatsApp: [phone] first and mention you come from CZcams, we'll provide details then.