I used the backing plate from the kit without the brake shoes installed. I am going to have to replace my rear axles before I can install the shoes and hardware.
@@isaacgreen1599 No I used the backing plate from the kit without the shoes or hardware. You have to use it to get the correct spacing of the rear axle flange.
love to talk about your brake lines that you ran to the front and rear calipers. running into problems. also, I'm having a hard time with the emergency brake set up. like to see your flex lines in the rear and what is the length on your front and rear lines?
This things gonna be fuggin sick
what is the model/part number for the rear brake kit you used and when you were talking about the rear axle what was the replacement that you used.
Wilwood 140-7140 for the rear and I used Allstar cut to fit rear axles.
Ever get around to hooking up the parking brake? If so, any details on the cable adaptation?
I haven't but I plan to and will post a video on it.
I’m going to have to go through this as well on a 68 Cougar I just picked up
Hi how u doing Did you use the backing plate that has the brakes in it? Or did you just use the bracket that you have in your video
I used the backing plate from the kit without the brake shoes installed. I am going to have to replace my rear axles before I can install the shoes and hardware.
@flipflopsgarage So do you use the backing plate that you have in the video And take the shoes off the other one put it on the Backin plate
@@isaacgreen1599 No I used the backing plate from the kit without the shoes or hardware. You have to use it to get the correct spacing of the rear axle flange.
love to talk about your brake lines that you ran to the front and rear calipers. running into problems. also, I'm having a hard time with the emergency brake set up. like to see your flex lines in the rear and what is the length on your front and rear lines?
You can send me an email at dmiles68@gmail.com and I'll try to get you part numbers of what I used.It was all off the shelf stuff from Summit.
What torque arm are you running on this?!
It's all part of the QA1 kit found here. www.qa1.net/product/r220-200 Hope this helps.
rear end ????????????????????????????
Sorry I don't understand what you are asking.