A very handy tip. Place a piece of rigid cardboard or an old piece of carpet under the deck before undoing the linkages. This will help you to slide the deck out much easier without scraping it along the rough concrete. You all saw how hard it was to drag it out right ?
Although I am a female, I am expected to be dumb. Thank you sir for your video out of about six videos south watched yours is the only one that showed me how to remove the rod on the back. Your lovely man thank you.
You did a great job and took your time explaining what you were doing. This made my removal and replacement much much easier on my YTH24V48. Thank you for taking time to make this "how to" video!
I thank you, Pitt. That driver side bracket broke off the deck about 3 years ago and I welded it back on, and it broke again, so this time I used angle iron and bolted it all together. Then I was left with a pile of pins and nuts and bolts. Your video saved me a lot of head scratching.
Thank you sooo much. I just bought the 2017 version so I assume it’s the same. It gets delivered tomorrow and I was worried how I would get it into my back yard as I have a gate that is 46” and I planned on cutting the metal post and welding it but now I know and I never even thought about removing the deck. Thank you again you saved me!! This is why it’s important to post things people even if you don’t know if you can do a good job it doesn’t matter this guy did a great job and saved my A$$! From Sacramento California done while in shelter lock down.
Thanks so much for taking the time to do this. I busted a spindle on a rock and ripped up my deck belt....knowing I could drop the deck and get it back on easily made my larger job much easier. Thanks!
Thank you from Nashville. I'll be removing the 46" deck from my Ariens and carrying it to the welding shop soon... thanks to you. I might even be able to get some mowing in today.
I'm thinking of getting a new mower so I'm researching how to do maintenance on different mowers, so far, the Husqvarna mowers seem like they are the easiest to work on. Thank you for the awesome video.
Thank you for this vid, just bought our first husk, 24v48 with a welded deck, my drive belt went out and I found your vid and it made removal easy, thank you again, awesome.
You make very good videos. I have the same tractor with the optional fab deck that supposedly connects the same. I need to change the drive belt as the tractor quit moving and smoked the belt. "3 years old" !! I'm pulling the deck tomorrow hoping to find it's only the belt and not the hydro unit. Your video showed me it's easy. Thanks.
Well done video! Wish I had watched it first! I had a large pin clip left over on reinstall. Your video reminded me where it went! It was the one you didn't remove holding front deck rod from removal front side. Thank You!
Nice !! I like how ya did it one handed , very helpful . Now I know I don’t have to put my beer down 😂😂…. Very helpful , doesn’t look like they changed much from last years model 👊🏼👊🏼
Excellent video, thanks from Kentucky. Going to sharpen my blades. About time to start cutting that beautiful bluegrass. Winter seems to finally be letting go!
Very good! Thank you!!! I need to have the mounting bracket welded and this will save me $40 for the pickup charge to the shop. Now I can just drop off the deck and have it back to my house this week. Thanks again!
One handed and appreciate it. I just hit a stump and one of the mower blades has broken out of the deck. At least I don't have to haul the whole machine to the dealer now! Thanks
Thanks for the video. Just FYI to anyone driving the tractor after taking it off. I managed to break the galvanized rod that gets disconnected and dangles from the front driving in reverse. It's probably best to remove it too if you plan to drive it around without the deck on. And also remove the back bar which dangles from the back. I've had the thing for 3 days and broke it, I'm sure that's not a record, but probably well above average ;)
Thanks for the video. I thought I took enough pictures when taking it apart to remember where everything goes 2 or 3 days later when the parts come in. I couldn't remember how that last bar your removed from the back went. Helped a lot. Well done.
Thank you for posting such a great video. This was direct and to the point. You did a great job with the video while doing the pin removals at the same time. This will help me remove my deck today. My son hit something with it and snapped the welds on the right hand side of the deck. DOH!! Once again great job!
I just replaced the blades on this model yesterday. Hold the blade with a rag and turn the bolt in the center of the blade counter clockwise with a 5/8 socket. I used the rag for the outter 2 blades and for the center one I held it with a pair of vice grips. I found that it was easier holding it with the vice grips. And when you put the new blade on make sure the "grass side down" is facing down and you'll notice on the center of the blade there's a star pattern.. make sure that star lines up with the star on the rod you're attaching the blade back into. It took about 15 with the deck still attached. It would be much easier if the deck was off.
Much appreciated someone gave me a yh 2348 and it's the same the deck was already off and the linkage arms not with it trying to figure out what parts i need and you helped me with that
I search CZcams for this video each time I need to drop the deck. Very good explanation of how to remove. This is a super "how to" video. Much thanks.
Could not remember where that small rod on the back was supposed to sit but I knew someone you CZcams would have my back. Thank you, sir!
@brentkleppen7325 That's what friend are for....👍
A very handy tip. Place a piece of rigid cardboard or an old piece of carpet under the deck before undoing the linkages. This will help you to slide the deck out much easier without scraping it along the rough concrete. You all saw how hard it was to drag it out right ?
Hi Pitt. Your video showed me where the one piece I couldn't figure out was suppose to go. (The triangulation "cross beam"). Thanks.
Although I am a female, I am expected to be dumb. Thank you sir for your video out of about six videos south watched yours is the only one that showed me how to remove the rod on the back. Your lovely man thank you.
You did a great job and took your time explaining what you were doing. This made my removal and replacement much much easier on my YTH24V48. Thank you for taking time to make this "how to" video!
I thank you, Pitt. That driver side bracket broke off the deck about 3 years ago and I welded it back on, and it broke again, so this time I used angle iron and bolted it all together. Then I was left with a pile of pins and nuts and bolts. Your video saved me a lot of head scratching.
Much easier then I was imagining it be. Thanks for taking the time to put this video up.
Thank you sooo much. I just bought the 2017 version so I assume it’s the same. It gets delivered tomorrow and I was worried how I would get it into my back yard as I have a gate that is 46” and I planned on cutting the metal post and welding it but now I know and I never even thought about removing the deck. Thank you again you saved me!! This is why it’s important to post things people even if you don’t know if you can do a good job it doesn’t matter this guy did a great job and saved my A$$! From Sacramento California done while in shelter lock down.
Thanks so much for taking the time to do this. I busted a spindle on a rock and ripped up my deck belt....knowing I could drop the deck and get it back on easily made my larger job much easier. Thanks!
Your videos are always helpful. it cuts the repair time down tremendously when you see how you did it.
want to thank you all the way from Canada..well done video. Always nice to see how it's done before making mistakes on your own.
Rob Erickson I'm all the way down under in Australia and I reckon this is the best one handed deck change I ever did see. Yes sir.
I've taken my mower deck off 3x now and I STILL pull up this vid just to make sure I did it right. Awesome vid!
Pitt you are the man! Super clear video, super clear narration. Thank you.
Thank you man!!! That helps me so much! May God bless you and your family. And your lawn mower.
Thank you from Nashville. I'll be removing the 46" deck from my Ariens and carrying it to the welding shop soon... thanks to you. I might even be able to get some mowing in today.
Thank you sir. Your ability to perform the work and keep the camera pointed at a useful angle is amazing.
Thank you for taking the time to do this. It gave me all the information that i needed.
I'm thinking of getting a new mower so I'm researching how to do maintenance on different mowers, so far, the Husqvarna mowers seem like they are the easiest to work on. Thank you for the awesome video.
Thanks for putting your video together. Watching you do it and then doing it myself is like my doing it for the 2nd time. Always easier.
Great job. Put mine back on after replacing a drive gear that I had to wait to get delivered. Did it in 5 minutes thanks to you.
Excellent video! It looks the same as an old Murray mower I had and replaced it after 16yrs. with Husq. YTA24V48. Thanks!
Four years later he still the man
THANKS MATE!!! never thought it would be as simple as you made it seem!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You have just saved me a fortune in repairs lol
Thanks for taking the time to show this. I need to replace my belt on mine.
Thank you for this vid, just bought our first husk, 24v48 with a welded deck, my drive belt went out and I found your vid and it made removal easy, thank you again, awesome.
Thanks! This video saved me from paying over $200 for a mower lift!
Man, nice job. Thank you for showing this, I'm sure it's helped alot of people, including myself
Thanks so much for posting this video! Nice job. I am now much more comfortable heading out to drop the deck and sharpen the blades.
You make very good videos. I have the same tractor with the optional fab deck that supposedly connects the same. I need to change the drive belt as the tractor quit moving and smoked the belt. "3 years old" !! I'm pulling the deck tomorrow hoping to find it's only the belt and not the hydro unit. Your video showed me it's easy. Thanks.
Absolutely clear and to the point. Thank you for a great video ---- it couldn't be done any better!
Thank you so much for this video!! I’m moving and couldn’t fit my lawn mower through the gate, so this video helped me so much!
Thanks from Kemptville, Ontario! This was super helpful.
A very good step by step informative explanation of how to do this. And you did it all with one hand.
Thanks for the video. Got a new one last year and I have to get her an oil change and a good cleaning this spring.
Well done. I almost missed that rod in the rear too!
Thanks for this! I took my deck off and then forgot where the support arms attached. This was a great resource to use.
Thanks for the tutorial. It really helped me. Do you have a video for the drive belt?
Thank you so much for posting this! I had a rod left over that I couldn’t remember the location. You helped me!!
Lmfaoooo this is actually my exact same situation 🤦♂️
The last one at 5:18 to be specific
Thank you for his video. You saved me a lot of time.
I would much rather learn from a regular Joe like myself than a corporate talking head.
Well done video! Wish I had watched it first! I had a large pin clip left over on reinstall. Your video reminded me where it went! It was the one you didn't remove holding front deck rod from removal front side. Thank You!
Nice !! I like how ya did it one handed , very helpful . Now I know I don’t have to put my beer down 😂😂…. Very helpful , doesn’t look like they changed much from last years model 👊🏼👊🏼
2ND thank you from Canada my brother. My Husky manual was written in Chinese. I can’t read Chinese. You made it plain and simple.
Man, that was really thorough. Great job!
Excellent video, thanks from Kentucky. Going to sharpen my blades. About time to start cutting that beautiful bluegrass. Winter seems to finally be letting go!
Excellent work, explanation and video, sir! Thank you very much for putting this up!
Best video yet,for doing this,I have exact same husqvarna . THANKS!
Much easier than I thought. Thanks for the video, well made and easy to understand.
Thanks for the info. Good job showing how it is done.
Thanks for saving me the time of figuring this all out.
Very good! Thank you!!! I need to have the mounting bracket welded and this will save me $40 for the pickup charge to the shop. Now I can just drop off the deck and have it back to my house this week. Thanks again!
Great job. Thanks for the info and demonstration.
Finger Lakes of New York say thank you! And impressive, all with one hand,
Thank-you so much for clear video and narration!
Thank you!!. Took off my deck last fall and kind of forgot where the rods hooked up
One handed and appreciate it. I just hit a stump and one of the mower blades has broken out of the deck. At least I don't have to haul the whole machine to the dealer now! Thanks
Thank you for your video. It was clear, simple and helped me to place my drive belt back on easily. Thanks.
Thank you. Was a little tentative to take mine off but I have to say your video helped me feel better about it.
Thanks for the video, I have one of these I need to replace the belts on its certainly got a big deck.
Great video, thanks,in my repair library now, I think I might need it...
Awesome! Thank you for the help!
A very nice video and answered my question of how to remove the blade deck. Thanks!
Thanks for the video. Just FYI to anyone driving the tractor after taking it off. I managed to break the galvanized rod that gets disconnected and dangles from the front driving in reverse. It's probably best to remove it too if you plan to drive it around without the deck on. And also remove the back bar which dangles from the back. I've had the thing for 3 days and broke it, I'm sure that's not a record, but probably well above average ;)
Great video, thanks for the help!
Thank you very much for making this video it sure was a big help. Great job
Awesome, and doing it with one hand and holding a camera too boot! Thank you for posting this video; it saved me from doing a lot of guesswork.
Thanks for the video. I thought I took enough pictures when taking it apart to remember where everything goes 2 or 3 days later when the parts come in. I couldn't remember how that last bar your removed from the back went. Helped a lot. Well done.
Extremely helpful. I wish you would make videos about blade changes and oil changes. Thank you.
ty i lost #6 lol and couldn't figure where to hook back up Ty for the Video
Thank you for posting such a great video. This was direct and to the point. You did a great job with the video while doing the pin removals at the same time. This will help me remove my deck today. My son hit something with it and snapped the welds on the right hand side of the deck. DOH!! Once again great job!
kids!! lol
Thank you very much. I was so afraid to do this until i watched your video.
It didn’t just help, it saved my life. Thanks!
This was very helpful. Thank you!
Thanks for sharing, gotta do this today and i feel better about doing it now
Thanks for the great video, greetings from Nova Scotia, Canada
Hey I'm from shubienacadie
I came to youtube to find a video on this and yours was perfect! everything i needed to know! thank you!
Definitely helped me. Great Vid! Thank you.
Thanks, big help on this subject, I couldn't find it on their site.
Thanks for the video! It helped me alot. I had to change the deck and the drive belts. The video helped alot
Great job, thank you for sharing this information. I did not know where to begin.
Outstanding video. Thank you!
Good job on this video. Now have u done one on replacing the blades? I have the exact unit w/ the 3 bin bagger...
I just replaced the blades on this model yesterday. Hold the blade with a rag and turn the bolt in the center of the blade counter clockwise with a 5/8 socket. I used the rag for the outter 2 blades and for the center one I held it with a pair of vice grips. I found that it was easier holding it with the vice grips. And when you put the new blade on make sure the "grass side down" is facing down and you'll notice on the center of the blade there's a star pattern.. make sure that star lines up with the star on the rod you're attaching the blade back into. It took about 15 with the deck still attached. It would be much easier if the deck was off.
I'd like to add my thanks. Great video, very impressive with only one hand!
Just what I was looking for. Thanks so much.
Thank you for making and posting this video. I hope my first time works as well as yours.
Thank-you. Helped me big time!
thanks! worked petfect and took 2 minutes to remove!!!
Thanks for showing how this is done .i kist bought one used and had no clue . My cub cadet is much less complex.
Thank you, this saved me a ton of time.
Much appreciated someone gave me a yh 2348 and it's the same the deck was already off and the linkage arms not with it trying to figure out what parts i need and you helped me with that
Awesome video! Thank for this valuable information. This video just saved me some money.
Thank you for this video, it shows how the remove the deck very well. This helped a lot.
Nice vid! Helped me figure out where the last one went :)
Just replaced a broken spindle using this video as a tutorial, great job.
Hah, I took mine off from a broken spindle problem but had to watch this video to get it back together.
Nice job, very helpful!
Amazing job with one hand! Will make my life easier one day soon. Thanks, brother! I love the southern accent as well!
Thanks for posting this, I got a craftsman with a 54" deck but it's exactly the same
Great video. Thanks so much
Thank you this helped a lot.
fantastic... Only thing I did different was put a zip tie on the belt to keep it in place when I flipped it over to clean and sharpen.