M&P9 M2.0 Compact with RMR - ATEi, AmeriGlo, Apex Duty/Carry, etc
Vložit
- čas přidán 13. 11. 2018
- SI Jellyfish: amzn.to/2AIuPTG
/ highjak86
Subscribe for new weekly videos and check out our Facebook and other social media pages for updates on our current projects and behind the scenes pictures, videos, and more.
/ highjak86
/ highjak86
/ highjak86
M&P9 M2.0 Compact with RMR! | ATEi, AmeriGlo Suppressor Sights, Apex Duty/Carry, etc - Zábava
Just watched this again. It popped up as a recommended.
Great pistol. I got mine a few months back and love it!
Excellent breakdown of the M&P 2.0. I did not know about the RMR not being waterproof from the factory. Thanks for showing.
I mean it is waterproof if it's sealed on the bottom, but that isn't always the case on a pistol if the slide isn't wide enough as most pistol slide aren't thus the sealer plate is required in that/this case. Thanks for watching!
@@Highjak86 Oh, okay. Thank you clearing that part up. Great content as always in your videos.
Love the factory stippling on M&P 2.0. An older Deputy let me shoot his compact at the range a while back. Thanks for the video.
Ditto. The factory grip is excellent.
Highjak86 is the front sight stock factory cut or was it custom milled? Cause I had my slide milled for a red dot optic and a dovetail cut and wanted to upgrade my iron sights.
bought the same gun this year love it
I run the battery plate on all my rmr’s that’s the one that sticks up a little and pushes on the battery I like those it keeps any flickering from happening.
Thx didnt know about the waterproof plate
Pretty cool. I have a 17 Milled by Doug, the pocket is nice and tight. I m think about sending 2.0 compact to him also... But going with universal cut this time around for a couple of my own reasons.... My sweat eats into the RMR housing and pro cut means I can't easily go to a replacement unit without nodding the pocket if the replacement is too long.
Nice!
Good break down on the pistole. Henry is so lucky!
And he doesn't even know it yet.
@@Highjak86 Daddy will ake care of it for him.
Great video as always. How do you like the Compact so far? Any issues or dislikes with the stock configuration?
Also, unrelated q: do you have any experience with the Vortex Spitfire 1x? Looking for a good etched reticle sight. Thanks!
Can't believe u kept that trigger shoe I hate it but to each is own looks good buddy keep up the awesome vids
I have an Overwatch TAC going in the G20. If I love it I may considering putting it in others.
Good for dudes with short index fingers. I have to really correct my grip on Glocks or i wont use enough trigger finger and shots go left.
@@MDeJo27603 it's funny people used to freak unless you only used the tip of the finger...which causes more barrel movement for me.
Since you have the hookup with knowing the people that did your gun, is there any way you could tell me what the height is on your front M&P sight and the rear Glock sight???
I'm having someone else do the same configuration for me, and i'm having an issur finding the right height sights.
Appreciate it!
Any chance you know the sizes of heights for the sights? I'm have the same sort of set up but have to order front Smith and wesson and glock rears! Any hell would be great
I have the same setup from ATEI along with the flat faced Apex trigger & 3.25 RMR. Like it so much I’m having Doug cut a second one for me.
Eric Skow Out of curiosity, what was the price tag on that work?
@@Zastav42 I would like to know that as well if you don't mind.
Got my slide back from atei on Monday. Turnaround time was about 3 weeks
Adam Hackney Damn, that was fast!
Do you have a video shooting this? M&P just realized these now from the factory with a Red Dot Sight
Are there any red dots that can be used with original iron sights
Do all the ameriglo sights fit the 3.6 inch version ? Just sold my 4 inch to acquire the 3.6 wanted to get some night sights on it , would appreciate the response
When do we get to see it go pew pew
Oh boy, this video is going to sell a lot of M&P Compacts and RMR’s.
Just bought a compact, cheers
Ive never seen rear sights in front of an optic, how does that work for you?
Do you know off hand what height the front sight is??
Cant decide between the regular 2.0 and this compact version. Such little difference...
Hi, Would be able to tell me the height of those iron ameriglo sights?
Whats kind of sight you have and was it drilled in or with a plate??
Do they prescription lenses? Lol after buying a reddot i realized how bad my astigmatism was
Hi would you mind to share info about ATEi? thinking of sending mine off for that same purpose. thanks
Nice setup! Does the rear sight cover the extractor roll pin so that you have to remove the sight in order to remove the extractor to replace or clean?
Good question: I couldn't say at the moment; I'm out of town and do not have access to the pistol. I tried to look at some photos, but this was indeterminate. I will be home Thursday, and will check it and update my reply.
Responding to your own question?
Man I cannot find an iwb for this pistol w mini light and redot??? Help!
that is my dream gun omg
Did you get it yet?
Yeah it's my dream gun to brother
Did you just put the carry duty spring kit in or did you do the sear as well?
Sear and Springs with the APEX Safety Plunger
I'm all for having a tight fit and all... but if for some reason you change out your optic to something different like a Holosun, or yours goes bad and you need a new one now you have such a tight tolerance that you may have to send it off to be milled again to get a hair worth of material out of the way.
This is true. ATEi now offers their "Universal Pocket (Bosses Included) For Trijicon RMR". Just sent my M&P slide out to them. I'll see how this goes in about 8-10 weeks.
Question... factory sights come at certain heights and when you replace (I thought) you were supposed to get same height. How is it, that same gun can use higher sights and/or RMR and maintain accuracy? This question applies to all pistols.
There would no point in getting the same height - you wouldn't be able to see over the red dot to co-witness them which is entirely the point of replacing the sights in this case. It's simply a matter of height over bore, that's all.
Bro go get the m&p 2.0 trigger shoe from hyve technology. I have a video on it. Pre travel is nearly non and over travel as well. I combined it with a mcarbo spring kit. The setup is better and cheaper than apex.
What's the cost on having an optic put on?
4 inch or 3.6?
Hows the site work?
I imagine that custom cut rear sight/RMR cut really limits your holster options correct?
shane kisling A bit, yeah.
It would be nice if Smith made a full length barrel and slide mated to the shorter grip of the compact 2.0. Concealing slide is easy, full size grip not so much.
I personally would pref the opposite - basically a G19X. I like the shorter slide with the longer grip if I'd have to chose between one or the other. I'd buy a 19X for example, but if Glock did say a 19 frame with a 17 length slide... nope not interested.
@@Highjak86 If that's your preference, any reason you didn't go with the 3.6" version?
@@unashamedly1776 I got this from a friend. I'd still go with the 4" regardless though. It's basically a slightly shorter G19.
@@Highjak86 gotcha, was just curious
You can swap out the slides on the 4.25 and the 4.0 inch giving you a full size grip and 4 inch slide and vise versa.
"And so we have the prophetic word confirmed, which you do well to heed as a light that shines in a dark place, until the day dawns and the morning star rises in your hearts;" (2Peter 1:19)
Thank you Trijicon!
Can anyone reccomend a legit online store that sells good red dot sights? i have the same gun
He said should be carrying a modern automatic machine gun lmao
Is this compact 15 rounds
No
Smith makes good guns, but I will never buy another S&W product. The fact that they don’t make any of their spare parts available for any of their guns is a deal breaker for me. Sorry but if my gun goes down I want the option to be able to fix it myself if I have to. I had an M&P 10 but I couldn’t even get a spare bolt for the thing. If the Lefties are eventually able to ban certain firearms (i.e. semi-auto rifles) I would expect manufacturer support to go away. So now I only own guns I can get an array of spare parts for; mainly glocks, mil spec AR-15’s, and DPMS patterned .308’s.
MFPWM2010 Yep I totally agree. You can buy a spare for almost every single Glock part. That’s why I have 10 of their guns.
I've had Smith and Wesson customer service send me spare parts before. Maybe try that?
92JoseR Why go through all that when I can just buy the $8 part I need?
92JoseR - Will they send you basically any spare part you can think of with no questions asked? My experience is that for most things they want you to send the gun in so they can work on it. I personally don’t want to be completely dependent on a gun company. What if the lefties eventually get certain guns banned? What if the company goes bankrupt?
The factory trigger shoe shape is hot garbage. Stabs me in the tip of my trigger finger. Apex trigger for the win.
I lol at "hot garbage" every time. I've got an Overwatch TAC going in my G20 that I'm excited to play with - if I dig it my other pistols will likely get an upgrade.
M&P over gay glocks all day