ShowKontrol to MA2 via MIDI over IP - No Audio Interface!
Vložit
- čas přidán 10. 09. 2024
- Getting timecode into the MA can happen one of two ways, either with an audio SMPTE signal direct into the back of a console in session, or with midi timecode (MTC) into an onPC station.
This method reduces the possibility of audio issues with SMPTE LTC since there is no audio involved at all. Simply connect the MacBook running ShowKontrol and a laptop running onPC together in a network, and you can get timecode in your MA session!
ShowKontrol: www.tc-supply....
RTPMidi: www.tobias-eric...
Thanks for making it all the way down here to the description. If you found this video useful or entertaining, send a like and comment my way to let me know!
For business inquiries, you can reach me at christian@christian-jackson.com
Support on Patreon: / christianjackson
Hoodies are back in stock! christian-jacks...
FIND ME HERE:
Instagram: / christianjackson.jpg
Twitter: / christianjv2
Website: www.christian-jackson.com
LINKS:
MA2: www.malighting...
Capture: www.capture.se/
Training: www.christian-...
Gear used to make this video:
Sony A7III: amzn.to/2KhGazM
Sony 16-35 GM: amzn.to/2XKyKZ8
Rode Procaster: amzn.to/2ICh8Z3
LED Backlight: amzn.to/2WCPBf0
Two videos in two days??? I know.. crazy. Who would be interested in a ShowKontrol giveaway where you guys can win a ShowKontrol license?
Also I know you want to see the last China video. I DO TOO... but you have to realize how much work goes into these in addition to actually doing the shows I do every week.
Here!
Here :D
Very interested!
Here pls 🙋🏼♂️
Here!!!
Haven't picked up ShowKontrol just yet, but iirc it's supposed to have a built in web server so other stations can see what's going on from a browser without necessarily needing a Mac at every station, as long as lighting and visuals are agreeing on standardized offsets for the timecode itself. The Ableton Link support is really intriguing for locking in beat-clocks when busking visuals as well since Resolume also supports Ableton Link.
Thanks so much for this. I managed to replicate this for a supper club install.
I appreciate you and all your videos.
Thank you Christian for all the videos you put on CZcams !!!!
20,000 dollars in equipment 10 dollars in table.
HE UPLOADED AGAIN POGCHAMP
Kappa
WeirdChamp , Normie twitch emotes
Christian pumping out that content! Awesome, and would love a showkontrol license!
Really nice to see stuff like that. The show, how you work and use all the nice technology😎✌🏻
Can you show how to mix 2 timecode songs into eachother?
Why not TCNet to LTC SMPTE into MA? You can use a 8$ Orange Pi Zero with out-of-the-box balanced out ;-)
Hi Christian,
Does it work with Reaper ?!
If i have two laptop in LAN :
X1 windows with OnPC
X1 windows with Reaper
Can i send MTC from Reaper to onPC with RTPmidi ?
Thanks !!
If you have a movie for showkontrol link to cdj, I am willing to pay for it. Because I am having a problem now, I use the network to receive cdj, and the result is that cdj can't operate. But I don't know what the problem is? Please, help me.
In theory, I'd imagine this may be possible to achieve with one Mac system instead of a Windows machine and a Mac - running Windows in Parallels or another VM software might be able to replicate this?
You videos are magnificent
Can i use rtpMidi to send midi commands to a remote computer in another location in real time?
DO U KNOW HOW 2 SEND MIDI FROM ABLETON TO XR18
I just want to add some strobes to my set that flash on the drob...whats the best way to do that
Why are you not controlling resolume with MA?
As far as I understood, you can have two timecodes fromm showkontrol... Cool would it bei if you could get these two timecodes into MA...
Yeah, I did something very similar for the lightshow I programmed for #robotspaceland at Vivid Festival in Sydney - I was using rtp midi and the MacOS Network midi to get MTC from Reaper running on a mac into a windows computer running onPC.
I also had Showcockpit configured to control OnPC and Reaper (on the other computer) all from the one Apc40mkii. At the show, I had an MA2 fullsize using audio timecode/LTP for lighting, but I used rtpmidi/network midi to control the lasers and ledstrip which saved purchasing rare bespoke hardware that normally would be required for LTP.
I should make some videos. Rtp midi is kickass.
RTP midi is the truth
Can you do a video how to setup ShowKontrol from CDJ to Resolume. Like when you start a song on the the cdj the video will automaticly starts playing too.
Hi Christian. Awesome little setup, but have to ask, do you leave the console or the pc as the master for this setup?
all about the Flow baby!!
amazing work keep it up!
Cool, if you are using the Mac’s OS built-in feature you should be able to use it with QLab as well, right? I wonder if it will work with MSC as well, hmm🤔 Probably not. Nevertheless, very interesting video, as always!
There is no way around using a Mac right?
I’ve found the apple network midi to be unreliable. Sometimes it’ll disconnect and troublesome to get it working again. Does work great when it does work though!
Is he posting daily?
THAT'S THE DREAM RIGHT!!!
Dope ! Can you show us an example of one of your show running with timecode from cdjs please ?
Nice setup, good idea. Do Pro DJ Link and MA-Net seem to get along with each other on the same switch, no glitches or other oddities? At 1 Gbps I would hope not, but who knows.
Been working fine for me
What would the latency be like when using network protocols?
It is on my ToDo list to create a setup for extensive measurements. This will include conversions from/to: DIN MIDI, rtpMIDI, TCNet and Art-Net. And maybe also LTC SMPTE
rtpMidi runs on top of an Apple MIDI session
github.com/vanvught/rpidmx512/blob/master/lib-midi/include/rtpmidi.h#L36
I clicked on this so fast again pt2
I just want to know why I got blocked on instagram ?? That’s my main question to you.
What happened to the Shanghai tour vlogs? Bring them back please
Make a video why do we need timecode!
Pleeease))
MacOS? Whut,...
I have no clue what the fuck Is going on. I just wanted info on cdjs hahahahah
You sure you want to keep that macbook and not just get a hackintosh before ARM CPUs are in the Macs and you cant do that anymore. Apple hasn't made good hardware since like 2013. This is the sort of thing you have to look forward to...czcams.com/video/gi9en4I-tjA/video.html.