Just built one, works perfect. I added two large Orings to the T where the barrel rests. Prevents it from sliding off. Hands down best and most compact design. Thanks for the video
I finally did it after watching your vid.. I am impressed of how sturdy and perfect for my gun.. not only that, it fits perfect in my gear bag.. hands down best stand.
Built this just now, super simple and easy to follow, although you do say to use the 8 inch pipes when grabbing the 9s. I went ahead and had 2 spare elbows left and cut another two 1 1/2 pipes to fork the end of the stand so the gun doesnt slide to the sides
Perfect! Thanks for this video. Made it myself in under 20 minutes including cutting. Well done. One tip, thing to add: Maybe add a parts list to the description so people can get the parts quickly. Feel free to copy paste this: 2 T Fittings 4 Elbow Fittings 4 45 Degree Fittings 2 x 9" PVC 2 x 8" PVC 1 x 6" PVC 3 x 2" PVC 2 x 1 1/2" PVC I used 3/4" PVC, what did everyone else use?
Half inch pvc worked. Invert mini with 48ci tank fits good. The part where the barrel rests is the only thing that needs some innovation as it’s unstable as is. I cut a U so the barrel rests inside it
I like this stand! but was thinking how to go about putting other 6" in the rear to hold my mask without taking away the compatibility or making bigger
you should make neck longer and cut t in half and I put rubber in it so dont scatch barrel and so gun dont fall over I made one like huslte paintball but my neck is adjustable so if I want to test barrels at target to see which one more accurate for the gun. also they have form that goes over pvc I took flex seal and spay bottom of form so it won't slide and I put my dye stickers deadly wind sticker voilent sticker and sly profit stick and I spary painted it all and spary painted my paintball name
+Bullet JVB no problem only thing I dont like about that cheap one is your nice gun could fall off wish I could add picture on here to show you mine tho I think I spent 25 but I made 2 cause I got 2 guns and about the size I bet mine 2 inches longer than yours mine flattens all the way out too I fit both of mine in gear bag but i got the planet eclipse gear bag
Meh...seems flimsy. I like the triangle design personally. This design would be better if you used threaded connections in the front swivel so that they would stop the swivel from rotating forward more.
@@jasonvanbui yup,used these about 4 times work great. Molded one with an upright and T to hold mask. I'm going to glue all except barrel flip up. Fill up with sand then put a hot glue plug to hold it in. Also these can be opposing and made into one.
@Miles O'Roads wow, never thought of doing that for stability. They make a T fitting that cradles the barrel perfectly, I just haven't had the chance to update the video to show it off. Glad you liked it
The tank but will keep it centered but you can do 2 things where the barrel rest. Cut it in half so the barrel sits in the groves making it super stable or put the barrel through the circle while it rest
Just built one, works perfect. I added two large Orings to the T where the barrel rests. Prevents it from sliding off. Hands down best and most compact design. Thanks for the video
Glad you like it! You can also buy what they call a T saddle fitting that works perfectly to rest the barrel. I need to update this video
I finally did it after watching your vid.. I am impressed of how sturdy and perfect for my gun.. not only that, it fits perfect in my gear bag.. hands down best stand.
Small, cheap, and compact! Gonna make one of these! Thanks for the measurements and tips
T Cuv you'll like it! Thanks for watching
Great video & looks very easy, thank you!
Thanks for this always struggling to fill up pod between games and where to set gun. Going to make one today
Just built this stad to your specs, perfect size and I like how it's just small and compact. Thanks man
jsnedicor1 and sturdy!
Built one today fits perfectly in the gear bag.
Built this just now, super simple and easy to follow, although you do say to use the 8 inch pipes when grabbing the 9s. I went ahead and had 2 spare elbows left and cut another two 1 1/2 pipes to fork the end of the stand so the gun doesnt slide to the sides
This stand is awesome going to try it out this weekend. Thanks for the video!
Perfect!
Thanks for this video. Made it myself in under 20 minutes including cutting. Well done.
One tip, thing to add: Maybe add a parts list to the description so people can get the parts quickly. Feel free to copy paste this:
2 T Fittings
4 Elbow Fittings
4 45 Degree Fittings
2 x 9" PVC
2 x 8" PVC
1 x 6" PVC
3 x 2" PVC
2 x 1 1/2" PVC
I used 3/4" PVC, what did everyone else use?
Thank you my good sir I was wondering what size pvc pipe to use.
Half inch pvc worked. Invert mini with 48ci tank fits good. The part where the barrel rests is the only thing that needs some innovation as it’s unstable as is. I cut a U so the barrel rests inside it
I like this stand! but was thinking how to go about putting other 6" in the rear to hold my mask without taking away the compatibility or making bigger
Thank you for this I’ve built mines today turn out great!
Just saw this now but I still built it and it looks beautiful
just built it came out great.Thanks...
Awesome!
Thank G big help
just make 6 of these cam out great! thanks for the vid
Awesome 👌, enjoy!
you should make neck longer and cut t in half and I put rubber in it so dont scatch barrel and so gun dont fall over I made one like huslte paintball but my neck is adjustable so if I want to test barrels at target to see which one more accurate for the gun. also they have form that goes over pvc I took flex seal and spay bottom of form so it won't slide and I put my dye stickers deadly wind sticker voilent sticker and sly profit stick and I spary painted it all and spary painted my paintball name
+Bullet JVB no problem only thing I dont like about that cheap one is your nice gun could fall off wish I could add picture on here to show you mine tho I think I spent 25 but I made 2 cause I got 2 guns and about the size I bet mine 2 inches longer than yours mine flattens all the way out too I fit both of mine in gear bag but i got the planet eclipse gear bag
just made one lads
Meh...seems flimsy.
I like the triangle design personally.
This design would be better if you used threaded connections in the front swivel so that they would stop the swivel from rotating forward more.
Just bought parts to do this in 3/4. Price has doubled
That's a bummer, I know materials after the pandemic has all gone sky high. Check out the price of lumber!
@@jasonvanbui is that what this video is made from 3/4?
@Damon St. Louis HI Damon, yes 3/4, but you can use any size really. Just need to adjust the fittings.
@@jasonvanbui yup,used these about 4 times work great. Molded one with an upright and T to hold mask. I'm going to glue all except barrel flip up. Fill up with sand then put a hot glue plug to hold it in. Also these can be opposing and made into one.
@Miles O'Roads wow, never thought of doing that for stability. They make a T fitting that cradles the barrel perfectly, I just haven't had the chance to update the video to show it off. Glad you liked it
What size pipe did you use
3/4
Can u use 1/2 inch pipes?
You can but I've seen them done before and they do not look sturdy at all
By any chance do u live in florida
it wont fall over if u push the top part?
The tank but will keep it centered but you can do 2 things where the barrel rest. Cut it in half so the barrel sits in the groves making it super stable or put the barrel through the circle while it rest
PB Obsession shit as easy as that sounds a muh fuckas sucks at this Home Depot diy shit thx for the advice will try it out
I built it too
Awesome, hope you like it!
PB Obsession what size pvc pipe did you use?
Saul Vargas 3/4
with 3/4 inch fittings?
How much does it cost
will yhis work with any gun? i have mini and etek 4
PB Obsession thanks brotha!
PB Obsession add me on facebook. aj null west virginia. picture with me and my gf. we are kinda muddy.
Is it good with a 50 tank
Yes, made some revisions to it since this was out
What size is the pipe
I believe I used 3/4 size
i got a lv1.5 in the same color lol