How to make STEREO amplifiers with ATX PC power parts | Class A
Vložit
- čas přidán 18. 05. 2020
- Hello, guys! In today's video, how to make a STEREO amplifier using ATX PC power parts.
The stereo amplifier class A, connected in type Darlington, of C945 and 13007 transistors for a powerful amplifier!
➤ How to make STEREO amplifiers with ATX PC power parts
➤ Copyright © by Share Tech Creative
➤ Thanks for watching my video
➤ Follow me:
czcams.com/users/ShareTechCr...
➤ Follow Facebook:
bit.ly/3eEHjNb
****Video you may not have watched****
➤ New Idea - Diy Powerful Amplifier STEREO B688 Transistors | Output Capacitors | Class A:
• Diy Powerful Amplifier...
➤ Diy 500 Watts Mono High Power Amplifier Using Transistors 2SC5200 and 2SA1943 - V1: • Diy 1000 Watts High Po...
➤ DIY Class A Amplifier 2SC5200 Transistor Extremely Powerful Using Output Capacitors:
• DIY Powerful Ultra Bas...
➤ New ideas - Powerful Amplifier With Two 2SC5200 Transistors | Output Capacitors | Class A:
• Powerful Amplifier Wit...
➤ 2 amazing idea - Diy Two-Amplifier With One 2SA1943 Transistor | Class A:
• 2 amazing idea - Diy P...
Schematic diagram: photos.app.goo.gl/gGG455a1YDU...
Amplifier using:
➤ 13007 transistor x 2
➤ C945 transistor x 2
➤ 33K resistor x 2
➤ 0.47R /5W resistor x 2
➤ 10R /10W resistor x 2
➤ 1000uf/10v Capacitor x 4
➤ 1000uf/16v Capacitor x 2
➤ 50K potentiometer x 2
➤ Filter roll DC
➤ 4-port speaker clamp
#diyamplifier #amplifierclassa - Jak na to + styl
Videos you may not have watched:
How to Make Amplifier Class A Stereo 2SC5200 Use Old Computer Power Supply
czcams.com/video/rUAeDX9G60o/video.html
Pa ano pag order na part
I will try it! Thanks
Where can I find a heat sink of the type you use here?
You probably dont give a damn but does someone know a way to log back into an Instagram account??
I stupidly forgot my password. I would appreciate any help you can give me.
@Fabian Winston instablaster ;)
That amplifier definitely works, no fake. I just built one half of it recently (mono) with a real MOSFET (Toshiba K2698), a BS170 source follower as input buffer (10MOhm input impedance), BS170 common source as voltage gain stage and a 2SC2240 emitter follower as output buffer to the powerstage. Works pretty well but 12V supply is just to less to get high output power. It distorts quite early.
Excellent !!! Interesting design ! Very nice to repurpose the old parts ! Thank you for sharing !
Many thanks!
Mạch thật tuyệt. mình cũng mê chế loa
VERY GOOD PROJECT !!! EXCELLENT CLASS "A" AMPLIFIER
Many thanks!
Muy bueno excelente proyecto ahora hace amplificador de audio sacado de televisión
Thanks
I knew I was keeping those ancient PSUs for something!
Muito bom 👍
Thanks!
BIEN EXPLICADO MASTER, EXCELENTE APORTE, GRACIAS...
Thanks
Nice job!! Thanks.
Thanks for watching!
Wow brilliant ideas. Amazing video.Thanks for the inspiration.
You are so welcome!
Bác ơi sao e làm như sơ đồ nhưng con trở 10w10ohm nguồn dương nó nóng hỗn lắm mà mạch k hoạt động. Mình ktra lại chỗ nào bác
Bạn kiểm tra lại transistor C945 xem chân B nằm bìa hay nằm ở giữa. Chân B nằm bìa mới dúng nhé!
Buen video y proyecto. Pero resultó ser de unos 3W. El sonido es bueno. La resistencias de 10W y los 13007 necesitan un muy buen disipador de calor.
Osea pajaass
Hey, yo lo hice y suena bien, pero hice modificaciones y con 24 volts, mueve unos parlantes de mini componentes, hay que disipar bien y colocarle su cooler fan... this amplifier have a good sound, thanks...
Bem elaborado 🤩🤩🤩🤩🤩🤩🤩🤩
De cuantos watts es?.
Mejor saldría un amplificador con esos MOSFET o sería mejor usar un integrado como el TDA7377?.?????. Cuál de los dos daria mejor resultado?.
Very interesting, 👍
Thank you! my friend!
hello friend do you have any video on how to make an amplifier using tda 7264 since already thank you
Hola.
puedo aumetar a 24volts la alimentacion ,solo subiendo el voltaje de los 4 capacitores ?
Very nice job!
Thanks for the visit
Great thanks. I am really impressed by your interesting suggestion.
I have some KSC5020, 2SC1815 and F20N50, 2SC1384 now.
Can I use them instead of 13007, C945? Or should I change some parts of your circuit to use them?
Hello Friend how are you? . your videos are very good.
since I don't know much about transistors ..
Which of all the videos and projects provides the best sound quality?
I have a woofer and speakers - 12v transformer and also a PC power supply
but what interests me the most is a good faithful quality of the sound.
I saw all your videos and I can't decide.
maybe you can answer me,
greetings .. from Argentina
Amigo assim fica difícil, onde foi q vc viu esse resistores as 10R/19w na fonte ATX.
Seems amazing
Amazing video sharing ☺
Thanks for visiting
LOve iT Thanks
Thank you too!
nice work bro. thanks
Welcome 👍
Excelente video la única duda es la potencia de salida del amplificador y las bocinas que se deben colocar en Watts y en ohms
De casualidad ahora sabes la respuesta?
Perfecto maestro
Bullshit!
Thanj youu
Good video, easy to follow and to understand. Thanks.
Glad it was helpful!
Nice!
Thanks!
Interesting...
Glad you think so!
Can you elaborate please, are those 13007 really mosfets, or npn tranzistors? Because under that designation you have bipolar npn tranzistors (d13007k) and mosfets also (something like 13007-2). I found in my old power supply actually npn transistors d13007k in that place where you took yours transistors from board.
13007 npn transistor
13007 is just an NPN Switching transistor , not a MOSFET...
Excellent video, you can make a preamp for electric guitar or bass
for this amplifier
Cool idea!
Gostei do amplificador é muito bom ok professor, Fais um amplificador com transformador de áudio ok Vou esperar esse vídeo Okay
Thanks, in the meantime, you can refer here: czcams.com/video/ji41JNmGhH0/video.html
Hello friend excellent video .my question goes .how to do to generate volume increase to a device that can not be increased volume?
Hi, how do you calculate the value of the resistors (33k and 10r/10w) what if I use a different (more or less watts) power supply components?
These are the ultimate ingredients, cannot be truncated, and cannot be altered!
I think you can basically use what the power supply comes with. Except the high watt ceramic resistors which he probably got from a amplifier
god job ! but 12v dc input cables ! you need more biger and powerful cable... Class A amp need amper
Thanks for all
Se puede usar 8 ohms en speaker? Tengo unos de tv
Yes, you can use speakers from 4 ohms to 16 ohms
Fino
You made more than one amplifier, what is the best amplifier you made with a strong sound
Sera
es de uso continuo o hay riesgo que se sobrecaliente las bocinas?
You can use it continuously, pay attention that the aluminum heatsink must be large enough
Está bueno, es una pena que hay cortés en el vídeo y no se ve bien las conxiones
And is it possible to add more 13007's? Thanks for the video man.
Yes, 100%,
What do you add more for? Higher output?
lo voy a hacer
how much wattage can carry for that amplifier?
the resistances can also be:
- 0.47r . 1w
-10k .... 1w ..???
Bro good job .Can this circuit be made more powerful, for example by increasing the number of transistors?
Yes you can
@@ShareTechCreative thanks bro.When we use more transistors, how will we make the circuit connection?
Bhai class H audio amplifire banaye ye
it's about 10W rms /channel amp from a PC part :D nice job
Yes, thanks
@@ShareTechCreative to small watt
@@gwantweng enough for desktop speaker.
edit: class A amp has efficiency about 50%. instead 10 watt/ch or 20 watt total which need 100 % efficiency from Bench PSU reading ~1.5 amp x 12 volt = ~ 18 watt.
You only get half of that since the design is Class A. Which is about 5 watt / channel.
Si trabaja en Clase A, pero no tiene la suficiente potencia para un buen sonido.
como de cuantos vatios seria ese amplificador?
Buen proyecto,pero que tal es la fidelidad del sonido?
Nice sounds, clear treble bass. Thank you
Amado hermano veo todos los videos tuyos son muy interesantes pero en este pedido dime por por vor el titulo de esta primera musica que es tan maravillosa para mi es unas campanas como en navidad y tocada con u8na guitarra seria feliz si asi fuese gracias
Home for the Holidays
@@ShareTechCreative thank you so mach these is library best regars
Amigo. Esses transistores suportam mais de 200v. Porquê não colocou mais voltagem? Poderia colocar ao menos 50vdc.
Thank you, I will take note of this
Acontece que se ele fizer isso o restante nao aguentaria.
The 10 ohms resistor have to be 10 watts or any watts serves on place, and what the purpose of they
How could I change this to 2.1 ?
What you need is here: czcams.com/video/RXn6OXe4_NM/video.html
What is the output power
se puede remplazar los transistores c945 por algun otro?
Yes, can
From where u take 10w 10r resistor?
why did you not use a desolder station instead
*Suitable capacitor 200v 300 uf instead of 25v 470uf*
"How to make STEREO amplifiers with ATX PC power parts | Class A"
I'm still wondering where the fuck he got those white blocks.. Surely, not inside the ATX!
Those are 10watts 10ohm resistors and lol yes they are not inside that Atx 🤣
@@Davidslabofficial I bet those ATX are the best in market! All the resistors I found are rice-like things... 🤦🏻♂️
@@GabeFKR yes Absolutely right!
Ahahaha those are probably 1/4 watt resistors size depend upon power(watts) of resistor
Yes those are pretty small
Hi Friend. I can use this amplifier with battery? I want to make bluetooth amplifier for outside.
No bro this amplifier needs 12v power supply
@@incogvirus5851 use a step up booster
@@philyrics6104 bro but battery consumes power rapidly
@@incogvirus5851 take a 60AH lead-acid car battery. Takes some time until it's drained.
@@thomasr.5443 Yes it works
Dude are you sure those 13007 are mosfets? On electric sheme you provided in video stands bipolar transistors!
stereo amplifier
Thanks👍
Hi STC what to do if my one 13007 is damage
Lol, take another one
Podria enviarme el diagrama de conexión para amplificador utilizando una AN17821A a 12 volts?
Puede buscar el diagrama AN17821A en google
El que encuentro no lo entiendo muy bien, no se mucho de electronica
Could you please show me B, C and E leads at a FET transistor? I bet you won't find them...
By the way, 13007 is a BJT, not a FET
You see in the description the video
@@ShareTechCreative no, you don't understand me.
I mean, in the video you say "take the two 13007 power MosFETs..." And later you refer with B, C and E to the pins. So see, a MosFet has no B, C, E but G, D, S. But the 13007 is BJT so B, C, E is correct. But MosFet is not.
Have a nice day
13007 is just n NPN switching transistor.. not a MOSFET...
@@bertr6741 Just what I said, didn't I?
Please look at my above answer to him.
He writes in the video "take the two 13007 power MosFETs" which is wrong because 13007 is s BJT
kindly share the clear schematics pls....
Schematic diagram: photos.app.goo.gl/gGG455a1YDUK1xvp8
hola veo en tus vídeos no tan claros, podrías mejorar tu cámara....no detecta cuando te pones a soldar...gracias bro....
Cuál será la potencia de salida
Más de 10 vatios por canal
Can i use 18 volts on 13007 transistor?
You can use 18 volts on 13007 transistors, but you may have to change the voltage divider for C458 transistors since they are operating in 12 volts. Good luck
The 13007 is BJT !!
Yes, thanks
OTRO PEDAZO Q ESTA MUDO
output watt?????
Can i use 10k pot?
Yes you can
@@ShareTechCreative i built it exactly like you, but my amplifier is very quiet. Does it need a pre-amplifier or did i do something wrong ?
@@ShareTechCreative Can i use D13007K ?- it is also from old psu but idk why my amplifier doesnt work
All that is fine but those resitors waste energy on heat too much , can be replaced with 12V/ 5 or 10W bulbs
it would be better to use parts and build AB class amp or make class A as JHL69 amplifer on 12 or 24 V
Porque sunba mucho
El mio también zumba mucho por qué será?
LA INTENCION ES BUENA-///////// EL VIDEO MALISIMO NO SE VE CLARO COMO CONECTAS LOS TERMINALES DE LOS COMPONENTES/// MANO ABAJO
Para qué quieres ver como se conecta, todo lo va explicando en el texto amarillo en el mismo video...
the sound is distorted
Wish they would talk thru it instead of music just so better understanding and not guess if its right or not since make and models are different🤔
I made this amplifier this is very loud
🤑
Very good 👍
10R/10w is not available in market.
sangat pusing untuk mencoba membuat
Seria mejor si explicaras hablando
Bạn cho mình số điện thoại nha
I made it and the sound quality sucks at max volume
me too. every amplifier I build that happens and I can't fix it. now, the speaker is super hot too. Share Tech Creative how can we fix the problems?
@@marcelobarrosvilla353 speaker will doe, as this amplifier has large offset
@@69iqtutorial yes, and i could fix the volume problem with other capacitor with low capacitance, like 2,2 microF. i works fine now!!
Las resistencias de cerámica no vienen en una vieja fuente de PC......vídeos mal titulados...
Sería mejor si cimpartieran el diagrama
Diagramas esquemáticos de enlaces en la descripción
da ums 10 wats
Kalau sama indonesia kok nggak di jawab
মুখে বলে কাজটি করিলে বুঝতে সহজ হতো ।
Bro that's distorted audio
...Выходная мощность не заслуживает внимания..(((
Vỡ tiếng
Zoom video
I will learn from the experience for this, thank you for the feedback
10 watts of heat wasted on the resistors ? no thanks , what a waste of energy in this low eficcient circuit !
Why is that a huge problem? is it expensive or there´s something else?
@@TerryGrancho isn't better to waste that energy in audio output power instead just heat ? its not expensive obviously, but the performance is sooo poor