AWESOME 3D PRINTED EXOSKELETON HANDS!!!
Vložit
- čas přidán 20. 03. 2018
- Hey, just a friendly reminder to follow me, it's the best way to support my channel: / rclifeonsimon
I printed all the parts in blue, grey and black PLA filament and it held up surprisingly well! I would like to use nylon next time for long term toughness, but the performance was still smashing! I 3D printed almost all parts on the CR-10S which did a great job as always. For the assembly you are required 80 screws and 80 washers, I went with 2.5mm 12mm length screws with some M4 washers (4mm inner and 12mm outer) and that worked perfectly! All the parts popped in place, only minor sanding necessary, and the exoskeleton turned out looking madness! 3DPrintIt came up with a fantastic design and it even held up to some quite severe abuse. Smashing soda cans and even the 3D printed Terminator head, I only received scratches at the end of it.
THe CR-10 3D printer is $390 right now: goo.gl/bJFYTB
Exoskeleton STL files: www.thingiverse.com/thing:892654
3DPrintIt's CZcams channel: goo.gl/frqcEg
If you would like to get daily updates of my work you can check out my Patreon page: / rclifeon
Music:
Joakim Karud - No Worries (feat. Dyalla)
Dj Quads - Missing Someone
Veorra & The Tech Thieves - Ghost Town - Zábava
A full suite of this and I'll take over the world! 👊
Rico Rodriguez! :-)
RCLifeOn i want buy this PLS
Do you get me project of this exoskeleton arms pls
You should use some gloves under the claws to protect yourself while you smash something.
Nice, you are a 3D printing god!
*"I FELT ABSOLUTELY NOTHING!"*
* starts bleeding *
haha
When bleeding use FLEXTAPE!
the adrenaline helps deal with the pain
XD
He should use gloves XD
9:30 "I may never take this off"
that's a sign of him descending into madness
And reemerging as Wolverine.
Next thing you know he finds out it's an alien symbiote taking over his hands
And he will become the dark lord of plastics
Imagine using these on a keyboard.
ultimate keyboard slam
*clicking intensifies*
Yeah perfect for the people who dont think their mechanical keyboard dont sound enough!
@@mrgamerfly1 económics
@@randomd2146 haha i can hear it. Like a box of lego flying down the stairs🎉🤪
Him: “you need 80 screws, 80 washers”
Me: “ew, work”
MoPeaDaz k
w00t k
me a intellectual: AWESOME 3D PRINTED IN PLACE COMPLIANT ROBOTIC SKELETON HANDS
Same bro.
"I felt nothing".... takes glove off to reveal mangled hand :)
so awesome that his hands arent bothered
"I felt nothing, except the pain" is what he meant to say. Such surreal cold-bloodiness towards soda cans. Is he even a human?
The design is not for punching. It did not even have any protection to protect his hands.
Edward Vinch true he should add some padding for protection
based on what the video showed of how the knuckles fit between the bars, I would assume that the shields (which he chose to leave off) would have mitigated some of the damage to his hands.
"These gloves are awesome I cant feel a thing!"
10 mins later...
"911 what's your emergency?"
"I thought I was Luke Cage for a second with my exoskeleton glove and broke 4 fingers punching a can"
I felt nothing
*Has a wound and its bleeding*
Lol XD..
Wounds don't always hurt
Bully: We fight tomorrow.
Me:
Edit: Why the hell did this get so many likes?!
@@MustardCrow yeah... wait, I COULD LEARN CODING TO DDOS MY BULLY *does nerd laugh*
honestly if a bully makes you wait to fight the next day he's a chicken. why wait till tomorrow?
is he going home to grab a knife or psych himself up?
@@darkshadowsx5949 oh the guy deleted his commit but it was something about brusing I think
@cheggers! Damn you teenagers! If you had not intervened my plan would've worked!
*gets bulied even more for acting like an autistic anime character*
Solid project! Must have taken a while to print all the parts, and good job assembling it, looked like some patience was required!
And I thought wearing ten paper claws on my fingers was cool...
^ Bugles
if you never did that in your childhood you probably never had one
I did that too!
Yup
@ITS YA BOI MIKE WAZOWSKI ive been c!awed at with those multiple times.
These, but made of metal and with proper padding...
That is exactly what I just have told my kid. It´s in our building list, right after his first forged tomahawk. Who is a great dad?
@@FBPrepping Tony stark
CZcamsRS:
before the video starts...
ME: but the video already started!?!?
Mystery Gaming before the point of the video..
@@slowmotionbetterthannomotion. but they didn't say that tho. Don't put words in their mouth
Now I'm curious if you add a little bit of padding to the places where it cut your hands if you could potentially reduce the damage you take and make the gloves more effective to use 🤔
An easier option would be to put small padded gloves on, but either way this is so cool!
I thought that as well
RIP Terminator
Federico Sosa Bayer who’s terminator
No rip hands.
Ya dude, that was a cool project, whats the point of destroying it?
Spartan Gamer a robot human
@@spartangamer5850 ikr
Make a metal version. 👏😀
WuzNab YES
YEAH SO DANGEROUS AND DUMB
AND WHAT WHE GONNA DO WHITH THEM UH
KIIIILLLLL PEOPLE
KIDS:YAAAAAAAAY
elPG BG yaaaay! I genuinely would like to believe your joking, but the way you wrote this sounds like your being negative
Wait till he finds out about metal 3D printing
Guys i had fucking caps on im joking wtf is the Internet community
9:23 - I can't feel anything ( starts bleeding)
I've got bad day today, but your videos everytime make me happy ;) thanks!
Tomáš Votřel konečně nějakej čech
Jo, taky jsem zatím žádnýho nepotkal :D videa se mi dost líbí, má podobný koníčky, a umí to všechno skvěle natočit, jeho videotvorba je pořád lepší a lepší
I sure meant it :D
These look soooo Awesome
Great work man!
Keep it up!
This guy is literally the flushed emoji
😳
Sooo cool love your channel
I thought the blue/grey color combo looked good. but might be a different perspective on the other side of the camera.
Exactly dude
I personally would go with grey and black.
+Exploding Hedgehog me dark lavender and light blueish green
True. My 2 favorite colors are blue and black and gray is close to black
Awesome print dude!
Neue Erfindungen und dazu DIESE Hintergrundmusic, perfect😎
These look like a LOT of fun to wear! I bet you still haven't taken them off :)
Joel?!?!? What are you doing here? Awesome to see you enjoying other content!
Nic Quintana I love what Simon is doing!
I'll sleep with them on tonight. Awesome to see you grow so quickly, you'll pass me in no time. 😱
Joel, remember your can crusher thing? Put a beveled insert on this to punch your can crusher. Hahaha
You can use the power of the FullJoel to do crush things like that. ;)
Those turned out amazing buddy! Great build! I can’t believe you killed your Terminator head! LoL
I know right
Napier Photography In 3D are you from Napier
Don't call people "buddy" it's rude.
Ofbasecfin my apologies but where I’m from the term Buddy is usually not taken as rude unless the comment was rude and is followed by the word “Buddy.” No rudeness was intended.
Ofbasecfin I guess the word is Sweden would be “Kompis” ? I am not sure but no offense intended.
so basically these are glorified knuckle dusters. Am i right?
Honestly I think the switch between filaments on the claws makes it look so much cooler!
I WAS WAITING FOR SOMEONE TO DO THIS
WTH is that profile pic!?!
is that shrek mixed with female barry?
Wear a set of thin leather glove liners and then you'd be fine against all damage
I think the plastic protectors were for the hands more than hiding the joints
Atroxit nope they are for looks
Hey, let's test that. Jimmy, go get that AK-47!
Yes, leather gloves with metallic knuckles would work best for smashing cans
that is so cool keep up the good work it looks awesome
You are a true artist :)
Finally, I can make another step towards my goal of eventually becoming a robot.
Siggesatan thank you for this as I genuinely enjoy learning more about robots.
When saying I wanted to become one, it was more about bypassing the medical industry and having easy repair. Total domination of the human race would be a happy side benefit.
lol.
You mean android
Siggesatan yet I got in 🧐
Those claws would be good head and back scratchers :D
But seriously these are very cool. Thanks!
That is awesome! RAWR
"Feel nothing"
Hands are bleeding
Hahaha 🤣
Noooooooo the Terminator! Awesome project though. Maybe pair the exoskeleton hands with some flexible filament gloves so your hands don't get beat up (and in a dark color it could look pretty sick)
Sick af...congratz
congrats on 300k
rip fingers.
re7 references are super awesome.
Berry Pudim ikr
There awesomer than "a good camera man like you" ((tape reference ))
Nice. I like to see an filament extruder to make 3d printer filament out of schredded bottle caps. Sorry for bad English
David thanks, I also recycle Bottle caps (for 3D printing filament), but I like to see RCLiveOn's Videos, and why dont ask for an Content.
Gloves look sick and fun as hell
I’ve never seen anything as satisfying as that printing time-lapse xD
See you at 3dmeetup sweden
*Breaks finger*
"I felt absolutely nothing."
That’s dope 👏
They are amazing
Swedish people back then:literally vikings
Swedish people now: "I got so excited I got a nosebleed"
Print a 1:1 hand to put this prop on it, like a display
I've watched a lot of your videos but I love you for this one :) especially the beating the terminator part you rock man stay at it
I am liking and subscribing to you because of your efforts, you were confident even when you are bleeding. Keep it up bro
I personally love the gray and blue. anyone else with me
8:09 “I felt absolutely nothing”
9:23 shows bleeding hand
KEEP UP THE GOOD WORK
That's really cool.
0:49 legit looks like morgs
gj man
Your Passion is contagious
Awesome i definetly want a pair too
Mom:
"hey do you want some......"
RC:
*punching the cans*
love you
It's so cool!
Your hands are amazing
You could totally send those files out and get them 3d printed in metal like EvanandKatelyn did during their colab with Alec Steele
That would cost a shit ton though
Middle school paper claws v 2.0
It's... It's...
IT'S BEAUTIFULL
Dang hands on top of hands! Now that’s a life changing thing.
メタリックにしたら絶対かっこいいな
公式はそんなアイコンにしません
蜘蛛のような関節の動き方ですね
No pain, no gain. It's an awesome project. I'd love to have it.
They look fun to use😊😊😊😊😊😊😊😊😊
何かわからぬがすごいな
Its not 3:28am you can see out the window lol 😂
You got me! 😅
RCLifeOn OMG your amazing
RCLifeOn I’m such a big fan because of you I have my own 3D printer but it broke and I’m trying to fix it it’s the anet a8
If you need help with that i may have you covered
Hazza Mazzard - I purchased two Anet A8's as my first printer, two because of what I had read of some of the issues surrounding the A8. And there are a lot of issues to contend with from my experience. Of single most concern for me was that the smooth rods varied in diameter along their length by as much as 0.28 mm. I ultimately built a CoreXY machine with the parts, replacing the smooth rods with true 8mm smooth rods and adding a V6 hot end with a bowden extruder.
as soon as i get my first 3d printer this is gonna be my first major project. this looks sick!
Very cool and it deserves a subscribe which i just did, you are a genius and i think you must make the whole suit, good luck 👍👍👍👍
洋画の悪役が、持ってそうなやつ
How are you making these things and forget kenetic energy would have hurt you anyway?
Ill be using this, thankyou
I just discovered this channel and it's awesome. Thank you very much for your work, it's amazing to see how you transmit that illusion for design and 3D printing.
Folks, could you solve a doubt?? Which 3D printer does RCLifeOn use? Could it be an Ender 3 or an Ender 3 PRO? I don't think it's a creality cr10s.
F in the chat for Larry the skeleton
Eddie Castro dead meme
いやこれ付けてもケガしとるんかいw
脱毛ふんどし 外国人兄貴かっこいい
Best 3d Printer
Great job. I love it. I wish I knew how to do it.
Is that how an exoskeleton is supposed to work?🤔
Abe The Rock no its not...
just a fancy glove if anything, good for digging atleast?
Exoskeleton: a rigid external covering for the body in some invertebrate animals, especially arthropods, providing both support and protection.
So...yes...that is how it is supposed to work. It's a rigid external covering that provides both support and protection...
Pretty much although this is not a powered exoskeleton. Seems like it wouldn't be too hard to upgrade to a powered version though. Just a few gears, a handful of stepper motors, and some jointed drive shafts.
Wined and Dined they do provide protection tho?
I would use protective gloves under these and over them
It looks like a game. cool😻
I watch this exactly 2 years after it was uploaded
i have ideas on how to improve this. . . . many ideas (cue maniacal laughter)
MUHAHAAHAHAHAHAHAHAHAHAHAAHAH
*Mendebur Lemur* dan gelenler 1+
Ben
Ben
Ben
Ben
Interesting input device idea
wow that is so cool
You have such a weak and slow punch. Until you starting going full on with that skull
怪我してるんかーい
Legend has it he’s still wearing those gloves
amazing :D
爪取るやつかと思った
日本人いますか?
いえーい
Now test the claws and really put the fists to its paces and punch a wall with them
Hey that is awesome!
That is awesome