Video není dostupné.
Omlouváme se.

Cisco Access Point to Controller | AP Joining With vWLC | Step By Step Configuration | CCNA | ENCOR

Sdílet
Vložit
  • čas přidán 18. 08. 2024
  • In this video, we're going to show you how to connect a Cisco Access Point (AP) with a virtual Wireless Controller. We'll walk you through the simple steps of connecting the Access Point to the controller, no matter if you're a begginer, a network engineer, or just curious about how things work.

Komentáře • 17

  • @MohanRaj-dx6ne
    @MohanRaj-dx6ne Před 5 měsíci +2

    Such a clear video to join an AP to WLC.....keep uploading these kinds of WLAN videos

  • @linioalan
    @linioalan Před 5 měsíci +1

    Excellent explanations, lots of usefull insights to take note that can be handy even in the case a troubleshooting is needed, thanks a lot for sharing!

  • @catarinatunguno5023
    @catarinatunguno5023 Před 5 měsíci +1

    J'aime beaucoup ton travail.❤

  • @glenntembo2693
    @glenntembo2693 Před 5 měsíci +1

    Thanks Silesio Carvalho- nice delivery

  • @Cisco-Instructor
    @Cisco-Instructor Před měsícem

    AP in Flexmode was my problem. Thanks

  • @Leokev123
    @Leokev123 Před 5 měsíci

    Hi Great video! But Will you also be showing us a video of multiple SSID/VLAN in a controller as well?

    • @silesiocarvalho
      @silesiocarvalho  Před 5 měsíci

      Probably only using packet tracer. My physical switch doesn't support trunking.
      Tks

  • @sunableflames9365
    @sunableflames9365 Před 4 měsíci

    Thanks for the video.Which model of the Cisco AP did you use in the video?Thanks.

  • @scottp8329
    @scottp8329 Před 5 měsíci

    Brilliant video but I’m a little stumped on how your connecting the the ap I assume your connection is to your computer but I’m confused to how the controller and the your pc know how to decide to say oh this is for the vwlc does your pc just know to pass it to the vwlc or is they some separate config to do 🤷🏻 thank you.

    • @silesiocarvalho
      @silesiocarvalho  Před 5 měsíci +1

      Thanks for that.
      Just bridge the vwlc interface with the physical interface of pc. They'll be on the same lan. It's like having two interfaces on your physical lan. Physically pc and ap are connected on thebsame switch. Broadcast from ap will also be sent to vwlc by pc.
      The next video might be more challenging/crazier 😉

    • @scottp8329
      @scottp8329 Před 5 měsíci

      Ahhh ok I understand now thank you buddy 🤙🏼