iProg+ Programmer- Clone.Honest Review not a Commercial One.Another Garbage. Just my Opinion
Vložit
- čas přidán 11. 06. 2021
- In my opinion another Garbage. a Clone that this time is not Cheap and does not deserve even a quarter of the Money paid.
Do not buy all this shit, Documentation on Forums not from Sellers.
Under no circumstances do I recommend buying it , but you can do what you want with your Money.
It's just my Opinion.
In the video I showed a Replacement that is Original but there are many others and that work as we expect when we pay Money on them.
Meiner Meinung nach ein weiterer Müll. Ein Klon, der diesmal nicht billig ist und nicht einmal ein Viertel des bezahlten Geldes verdient.
Kaufen Sie diesen ganzen Scheiß nicht, Dokumentation in Forum nicht von Verkäufern.
Auf keinen Fall empfehle ich es zu kaufen, aber Sie können mit Ihrem Geld machen, was Sie wollen.
Es ist nur meine Meinung.
Im Video habe ich einen Originalersatz gezeigt, aber es gibt viele andere, die wie erwartet funktionieren, wenn wir Geld dafür bezahlen.
What cheap tool do you recommend to read/write Infineon chips with pins / obd2 without soldering wires?
Pode ser conectado direto na tomada OBD2 do veículo ou vai queimar o aparelho?
Hi. Motorcyle brand available in the software? (Like yamaha,honda,kymco,piaggio)
What do you recommend for clearing crash data on airbag modules? I'm in us
Hi.
CG100 PRO or VVDI Xhorse
both are original. you can do soft update and firmware upgrade. rather than paying $ 180 for a clone, you better buy an origin for $ 500. which reads the latest chip and processor models
Thank you very much! In the long run can these be used to program other modules?
@@YOYODiagnostic will this item work on 2019 model vehicles ? Or would I have to buy separate updates etc
@@Titobandz
I don't know . Sorry
Hello, you've done a very nice work, good luck to your hands. I wonder if there is an address where I can download the ecu software of the cars to my i prog+ device
what you recomend for frm repair ? i want something on the cheaper side if possible
Hello.
If you want something original the cheapest is VVDI, and if you are thinking of buying a clone it is Xprog, but I do not recommend it.
@@YOYODiagnostic i already have a xprog 5.55 but it only worked once! now have certificate error and never worked again.! what model or part number vvdi should i buy!
@@mohamaditani451
VVDI Prog. its price is around 500 euros
In your opinion what is the best tool to flash ecus, that is on the cheaper side ?
Hallo.
Original Scanmatik. Don't make the mistake of taking a Clone made in China under the name KTM BENCH. or flash ecu or KTM OBD. the price was around 600-700 euro. The same price is paid by the Chinese clone from Scanmatik.
If you want something profi Autotuner
What do you recommend to buy under 1000 dollars anything available on the market for programming keys and the ecu or ecm whatever you want to call it
Hello.
Unfortunately there was no programmer for this money.
At the amount specified by you you approach Autel IM 508, but for programming ECU + key is IM608 which costs around 3600 euros.
@@YOYODiagnostic yes I’m familiar so do you think Autel is a better option than xprog and Xhorse who offers the best value for money and have a very large variety of vehicles and functions Xhorse key tool plus looks pretty good
@@cassk9999
Xprog is for reading Chips and Eeprom not programming Keys. From the Xhorse company you have several options, one would be VVDI2, which is also 1200 euros, so at the same price as Autel IM508. Autel is android Tablet so it is much easier to use and much more intuitive to the menu. on VVDI 2 you will need a laptop and the menu is not so easy to use if you are not familiar with the options. Xhorse also has a tablet that does the same thing as Autel but is almost double the price. something cheaper is at Xtool Xpad Elite 3, if you are interested you have some videos on this Channel. My advice is to buy something good so you don't have to pay twice. :))
@@YOYODiagnostic excellent thank you I’ve seen the autel im508 which comes with a xp400 module adapter which is for eeprom chips , however the Xhorse mini prog can read chips on board and for Mercedes bmw and audi you can read ecu info without soldering using special template boards , it’s such a task choosing the best possible tools at the price , I mostly do call out all keys lost automotive working for a firm who uses equipment at dealership level quality however I’m looking to go out on my own soon
@@YOYODiagnostic I have found the correct tool for nearly a thousand bucks or just over
Great video. Do you have a contact I would like to get the 2 versions of ksuite you had for ktag in a previous video
Thanks.
yoyo.pc86@gmail.com
Hi does yours work without reworking it?
Hello.
Not really. I will make a rework video for this product. If you use it, do not power it with the 12 V adapter, you will fry it instantly. It has some wrong parts in it.
@@YOYODiagnostic yep the capacitors are not for 12 volts. There's a few rework from several guys and gal for this. Might be a good start.
@@YOYODiagnostic so what should be the power source . I mean frol which we connect the iprog
Can u make video read write eeprom plz
If all these clones are so terrible, why not to use a database with a generic programmer like an original T48 or Revelprog-IS?
you can buy these programmers original at 50 or 100usd and I see that support many ics.
a newbie question.
The programmers mentioned by you cannot read the Aribag ECU from the new generations of cars. These come equipped with MCUs from Motorola or NEC, so they are useless. I show you in these videos what these programmers can and cannot do, this does not mean that they should not be bought because they do not work on a certain brand of car. The point is that I bring these issues up so you know what to expect and don't buy products hoping they can do more than
@@YOYODiagnostic thanks for your help I will check all your videos.
So on latest cars you must flash an mcu ? Because the save there the crash data? . Very interesting 🤔 So there are out there the hex files of the mcus !
@@vagelismix1 It depends on which ECU Airbag it is. some have Eeprom others you have to read MCU. If you mean the video from Short, yes that one. Airbag ECU from Renault, MCU must be read.
Hi
Were you able to repair it and get it to work fully?
Hello.
I don't have time to make repairs.
In the little time I have I try to show something that will help you with some information.
Download link for iProg+ full please ?
Sorry but I don't send links for software.
@@YOYODiagnostic I found It on internet "iProg+Prov86" but why are you not sharing links ? TF
I can share the link myself If you dont want to.
carprog vs iprog... which is better
Hello.
It depends on what you want to do with it.
I prefer carprog but it also works on older cars.
Take a look at VVDI !
@@YOYODiagnostic trying to reset crash data on North American cars ie chevy, gmc, ford Chrysler etc
@@772777777777777 VVDI or CG PRO III
I buy last week 150£. Shit I don’t like it. Some programming not English
CG 100 pro or VVDI is the choice up to 400 euros.
Mine the yellow one was burnt
I need your help
If you don't like how it works just send it to me :-)
Hello.
When this channel reaches 5k subscribers contact me by email and write the address where to send it. 👍
Contact him over 5k now. Yoyo page is full of information should hit 10k soon
@@YOYODiagnostic Thank you very much but I already have iProg and it is excellent :-)
@@ChupoCro where you buy iprog?
@@milosblagojevic1196 Narucio sam ga s Aliexpressa. Na digitalkaos su uputstva kako ga treba preraditi.
Really bad tool ,,!
Hello, I have CarProg v8.21, but it does not read EEPROM 93xxx. What is the solution? Is Prog+ better than it? Thank you.
Hello,
it is hard to say if it is better considering that it is still a clone.
You should do full rework.
The point is that all these Carprog , Iprog , Orange 5 , Xprog clones don't even have half the potential of an original. If you add up the price of all these, you exceed the price of an original programmer, ex: VVDI or CGDI
Hello, for EU Market, which would you recommend ? I'm a starting locksmith and have im508+xp400pro but I still can't read many chips MCUs, can't clone many ECUs etc. and I want to expand the services I offer.
from VVDI I have the keytool max pro. So I think VVDI2 is not needed as most keys I cover. VVDI prog ? CDGI equivalent?