2015-2017 Mustang Ford Performance Red GT350/GT350R Push Button Engine Start/Stop Kit Installation
Vložit
- čas přidán 15. 03. 2016
- Bill shows you how to install a Ford Performance Red GT350/GT350R Push Button Engine Start/Stop Kit on your 2015-2017 Mustang.
Purchase Product Here:
www.cjponyparts.com/ford-perf...
Give your 2015, 2016 or 2017 Mustang the coveted look of the GT350 with this Red Push Button Start/Stop Kit from Ford Racing!
This Ford Racing Red Start Button kit is designed to replace the stock silver start button cap found on all V6, EcoBoost and GT Mustangs with the popular Red GT350/GT350R start button cap, giving your car a distinctive, aggressive appearance.
Check out more Mustang Console Parts from CJ's here:
www.cjponyparts.com/mustang-co...
Check out more Ford Performance parts from CJ's here:
www.cjponyparts.com/ford-racin...
Subscribe to CJ Pony Parts on CZcams here:
czcams.com/users/subscription_c... - Auta a dopravní prostředky
You sir are a master mechanic.
I bought some angled plastic picks to prevent scratches but after snapping off two I did as you and wrapped a metal pick and used a little painters tape on dash in case of my old man eyes and fingers.. Magic!
You make a lot of this stuff look easy. Like the guy who can do a backflip and it seems so easy watching but it’s experience.
Without your videos I never would have tackled hood struts, vents, rear seat delete (I’m an old man and can now barely straighten out :), the GT 350Alcantara wheel with paddle shifters. My pit bull knows a few new vocabulary words today.:)Very scary for me but video was life saver, and now GT359 starter button.
Tomorrow is the red shifter knob.
It looks so good man!!
Thanks again!!
Without your videos I’d never attempt on my beautiful car. Thank you very very much.
Maybe one day I’ll qualify as as wrench holder for you but right now you need to be at Ford Engineering. Truly a master mechanic young man.!!
Thank you for the compliments!
Bill - Thanks , I was super nervous but seeing you remove it with such ease inspired me , that I too can do it. I too uses a angles pick , WOW less than 40 seconds and off with thee old silver stock one. The new RED Start button looks killer ! Thanks again
Well, I WAS interested until I saw that the red button costs FIFTY dollars. For a quarter-sized piece of red plastic? Really? Thanks, but no, thanks. I'll keep my silver button.
+Ted Giro Go ahead and get it, it adds 30 hp
I agree with u!!! I was all exited until i saw the prize. it looks awesome but they should lower it. I'll get it then.
@@Knards it needs a tune for the 30 hp gain tho keep that in mind
@@trunkslorenzana Several hundred extra
it's down to $36. LOL
I drilled a small hole in the button and hooked it out with a pick. No scratches at all. Red button looks killer.
can you upgrade from the base GT push buttons to the premium GT toggle switches?
It beat my ass for about 5 minutes. Then it just pops off. I dropped the F-bomb and got a scratch on my new dash. It looks really great.
That is much easier. I however did it the "long" way and it only took me about 30mins so it's not as bad as everyone makes it out to be.
is there a camera kit for the front, similar to rear facing camera on 2016 mustang GT
where can i get more of the clips that came with the button. i lost some of the clips and need more.
Dudddde.. I don’t know how you do it Phill you make things looks so dang easy! I couldn’t take off the dang button at all in fact I scratched the trim 😢 I had it with it finally decided to took the whole thing out ( just upgraded to sync 3 so I was familiar with the steps) it was pain of the *** but had to do it.
my mustang 2017 ecoboost radio and air buttons dont work in yhe front panel.. its fuse or replace panel?
Do they make one for 2018 eco boost premium?
Will this work on the 2019 mustang gt as well?
I broke that small clear light on the inside housing, where can i get another one of those?
Is it same with 2018-2022
Man you make this shit look easy. Im having a hard time getting my stock button off.
I hate this Chanel just because I want to buy everything on ur website for my mustang 😂 just kidding awesome videos!! I’ll be buying a few things this week
I want the speedometer of the shelby gt350
It’s good for 2018 mustang ?
Is the install the same if I want to put the red and silver one in my gt3500?
Yes the Shelby button removes and installs the same way, the only change is for the 2018 and newer Mustangs.
Is there anyway to install the chrome switches onto the non-premium package versions?
My understanding is the whole panel is different but I cannot say for sure.
Bill Tumas Yea, I took a closer look and the buttons on my car seem much wider than these. It's a real bummer.
It would be cool if you guys offered custom start stop buttons for these cars. Maybe some aluminum variants as well if that's viable. Good video.
Gas & Brass plenty in other online retailers bio hazard symbols, skulls, transformers logos, etc....
Also....they make quality decals you can simply put over the stock button that show a custom design and still show the light up commands of start stop
That is the flat rate way to do it.
shots fired lol
i want like a switch instead of a button
does the green led shine thru on the letters like the stock oem non gt350 button? Where it says PUSH START STOP?
Yes it lights up just like the factory button.
Will this work on a 2018 Mustang?
No it will not, the 18 button is different.
First time I saw the other install, I thought no way in heck is all that worth a red button. Glad to see a cheater version.
Link is broken.
Here ya go www.cjponyparts.com/ford-racing-push-button-engine-start-stop-kit-gt350-gt350r-red-2015-2017/p/M10B776MR/
Very much easier but all I did was spend $3 and got the layover decal. Looks exactly the same.
+Jonny Rodriguez
$3 is too much. lol
where did u get that decal???
+adrian vindas I believe it's called "stangsteer"
Ok man, I'll check it out. Thanx
Its 50 because its off of a premium model, and ford realized most guys who tune cars laugh at a mod this cheap. My list for my Ecoboost tune is 5,000+ dollars, so an extra 50 literally doesnt make me flinch at all.
Man, this did not work for me at all...
Patience my friend, I did it yesrerday with 2 small pick tools wrapped in electrical tape like he said. Worked great!
Looks like the pick gouged the plastic surround :(
+scterka if you are careful you will not gouge anything, there is a small mark on the chrome surround but I did this 5-6 times before the video making sure it was repeatable.
make it $20 and People will buy it $50 for that is overpriced
even 20 bucks is too much.
ikr, must be a ferrari button
20$ = fair price = Purchase
It’s $20ish now on AM
You can get it for 15 on am
I gain 200 hp after the installation
Must have installed it wrong, it's usually good for 300 hp.
V
1:20 I just watched that video from Ford and it's fucking rediculous. The Chinese have a saying "taking your pants off to fart" and that's exactly what Ford do.
LLLOLOL...shut up, thats soo much easier
Its almost easier just to buy a GT350.....
😂
50 BUCKS!!??? Wtf, meng. Its a piece of red plastic. Otherwise, cool mod
+Sith Lord Ford makes the pricing, unfortunately almost all OEM parts are not cheap
+Bill Tumas Yea, i'm sure. I'm not knocking on you guys, I know it's Ford. But still, it just seems so unreasonable for a little piece of red plastic. Let them know the feedback from the customers, maybe they'll adjust the price a bit.