46 ford flathead had a little bit of a fuel issue, not a problem! Good thing I don’t know much about these but it’s okay! Runs like a sewing machine, though!
Dude, do some basic diagnosis. Put a fort a few pressure gauge on the gas line from the pump and see what how much pressure it's putting up. You don't need more than three or 4 pounds of pressure for a car like that if it's more than that, put a regulator in line. Aside from that, have you had the car? Do you know what the main jets are in the idle jets sizes are? If not start there.
Thanks for the advice it was putting out about 6 psi and I put a regular on and ran 50% better. Put a rebuild in the carb it’s running 85% better now. It still has a little sputtering at about 1/4 pedal. Just picked it up pretty a few weeks ago. Thanks again.
Dude, do some basic diagnosis. Put a fort a few pressure gauge on the gas line from the pump and see what how much pressure it's putting up. You don't need more than three or 4 pounds of pressure for a car like that if it's more than that, put a regulator in line. Aside from that, have you had the car? Do you know what the main jets are in the idle jets sizes are? If not start there.
Thanks for the advice it was putting out about 6 psi and I put a regular on and ran 50% better. Put a rebuild in the carb it’s running 85% better now. It still has a little sputtering at about 1/4 pedal. Just picked it up pretty a few weeks ago. Thanks again.