Making A MIDI Stylophone out of GLASS!
Vložit
- čas přidán 6. 09. 2024
- A keyboard (well.. stylophone) that looks like it's floating in air! That's what I'm making today with this circuit board on glass.
The way it works is there are two groups of ten keys. Each key in a group is connected with a resistor, so that when the stylus touches a key and completes the circuit, it sends a different value to the analog pin on the arduino. The arduino takes that value and turns it into a midi note to send to the computer!
Stylophone business card : • Stylophone Business Card
Glass circuit board : • Fabriquer un CIRCUIT I...
Things I used :
Arduino Nano : amzn.to/3b8nv2X
Resistors : amzn.to/2WMnLRd
Copper Foil : amzn.to/2Uo3qQH
Vinyl Cutter : amzn.to/2UoPmGx
Transfer tape : amzn.to/2UmbtNJ
Paracord : amzn.to/2JlttkZ
Buying things from these affiliate links helps me keep making things!
"Did you know his wife is a retired model?" OH BOY that one is gonna go over alot of people's heads but that just makes me love it more.
As I was spending the time putting that whole bit together I was thinking “man, this is a _lot_ of time to spend on a half second joke” 🤣
There's going to be a massive spike in audience retention for this video where I keep going back and watching those few seconds again and again.
Confused!
That's awesome.. took it a half second to sink in, then I laughed my butt off!
@@mobius4892 retired model as in like.. outdated tech, an older version ;) took me a minute too lol
I still don't know where to look when you're talking, and probably never will
And I will decide to _look_ past that
Away?
This is the content we need right now
Trying to keep things fun with all the craziness going on!
Retired model - and you managed to deliver it with s straight face!
The application on the glass was magical to watch, and the finished look is really high end!
Having used SolidWorks for years and now Fusion 360 I find it pretty easy to keep a straight face when I say, "Yes, I've done some modeling work".
@@TandaMadison 😂🤣 As you should! 🤘
🤣
Every so often I like to try and make something that looks nice!
@@TheMakerMonster In my book, most everything you make looks nice! 🤩
And all of a sudden my mood lightens up! Thank you!❤
Doing what I can!
Hope you’re doing well!
A retired model? Man, some computers have all the luck!
Since you have it hooked up to midi you could do a whole bunch of other stuff as well, like a capacitive copper area that can act like the mod and pitch wheels on a regular midi keyboard for instance. Very cool project!
Yeah I was thinking about what I could potentially try for a larger project like it at some point. I’ll have to ask you if I do since you seem to have a handle on all that stuff!
@@TheMakerMonster do it! Midi is a lot of fun to play around with, or just input devices in general. I have some stuff in the pipeline for future projects as well 🙂
There are several microcontrollers that have pins dedicated to touch inputs, if you didn't want to roll your own capacitive pads.
your wonders never cease... 🖤
Awesome design and fabrication! Looks so modern. Great video, finely filmed and edited. : ) So creative. Mahalo for sharing! : )
Thanks! Glad you enjoyed it!
just subscribed. because i finally see a maker using a correct arduino. a pro micro. no arduino nano, no uno. the good cheap stuff.
Love it! It looks super cool!
Thanks, Tyler!
Genius! I love it! I didn’t even realize cooper excited in a sticker format! Thank you for sharing!
I didn’t either. But now I want more of it!
The lullaby at 0:44 is so good 😂
Everything you make is super clever man! I love it! ☺👍
Thank you, sir!
That is darned cool! Floaty, cool music was definitely what was needed!
One day I’ll learn how to actually make music.. 😆
the background tune is really cool
I remember stylophone when it first came out...but it never looked as awesome as this!😍 You smashed it out of the park on this build. Top work Fella 👍😁 I think I remember seeing Mrs Jensens early work.... wasn't she a BBC B cup?🤣
😆
Yay another awesome vid . Always a treat when you post.
Glad you’re enjoying them!
Amo este vídeo y recién empieza, es una locura y es hermoso.
Seriously SO.FREAKIN.COOL!
Your link is broken 🤣
Thanks, man!
Wowwowowow thats cool!
I'm gonna choose to ignore the notes being on the wrong piano keys because of that RETIRED MODEL bit. And you didn't even blink while you delivered the line! This is the kind of quality content I subscribed for.
Hahaha. Luckily I can always change the notes around!
Wonder what your sound library might be, it's so sweet listening compared to others toy sound.
Copper foil on a vinyl cutter... that concept just opened up so many possibilities in my mind
Right? It was such a cool idea. Once I saw the video I knew I had to try it
Very nice project!
The only thing that would made it cooler was if the sound generation was analog :)
I thought about that but decided I wanted to option to change the sound up if I wanted to. Maybe I’ll make some kind of attachment for it or something 🤷♂️
That's awesome, the old stylephone makes a comeback.
Love it! Such a nice sound to it too. And it looks mega! Nice work man
And I can make it sound like anything!
Most excellent build Mr. Monster!! Jensen the Mrs. and the kiddos are going to be so happy.
They seem to be enjoying it!
Hi! just discovered your amazing channel, how do you use an arduino nano and turn its analog values into notes? I found instructions using arduino pro micro or leonardo with HID compatibility and so making a midi controller, but I have no idea about how to do it with the nano, thank you in advance!
That looked odd to me as well after reading your comment, so I went on and search what was up. Turns out, it is an Arduino Nano Every, not a vanilla Arduino Nano. It doesn't connect to a computer directly, but the introduction page does mention about MIDI, so apparently it is possible to create a midi device out of it.
This was a super cool project that looks awesome! My kids would have played with this for hours when they were little. Thanks for sharing!
Thanks, Seth!
incredible
I love it! Wish i had this one when i was a kid!
Maybe you would have hated it less! 😆
@@TheMakerMonster tee hee!
Jenson‘s kids are adorable.
He’s got the cutest little family
looks very cool
I hope your subscribers appreciate your talent man, you are really thinking out of the box 😃👍👊
Thank you, sir!
Your vids are always the best maker monster
❤️❤️
Woah thats looks so cool...subscribed
Woahhh! I never thought about using the vinyl cutter to make a custom circuit. Killer project, man!
I hadn’t either! Once I saw that video I knew I had to try it
Maaan, when i saw your face, i subscribed immediately
Awesome work! 😃👍🏻👊🏻
Thanks, Fred!
dude your channel is PERFECT!
This is so cool!!
Oh, this is so VERY cool! Now I want a vinyl cutter... :D
They’re super handy to have for when you do have a use for them
Great job! I hope Jensen and his family are doing well. Former model, I get it, and the children, so cute.
They really are just the cutest family
You are one clever Monster! Retired model 😂😂😂😂😂!
😆
Ho.ly. COW.
I only learned surface mount soldering recently and it was HARD. You did an amazingly neat job!
Don't know why it turned that into a link...
I definitely made sure to get the largest size I could! 😆
This turned out beautiful!
Thanks, man!
It looks fancy when it's filmed, but won't copper tarnish as time passes?
The new Nintendo switch looks cool
Nice work!
Thanks, Andy!
I love this music track! Where can I find it?
Genius👍👍
How did you program so many unique inputs on one sheet of copper?
This was weird but cool.
absolutely, delightful!
Hey thanks!
Could you add an archive of the project with the firmware and the scheme to the description please?
Great little project. Retired Model. 🤣
🤣 Thanks, Chad!
Would you be willing to share the code for the arduino? I'm a beginner when it comes to electronics such and this seems like an awesome project so any help would be greatly appreciated
Opening song! 😍
Great video! I love learning more about the crew over there! What else don’t we know! Does the mail man have another job? Does bandersawus have hidden talents? I can’t wait to find out!I hope Jensen and fam are okay!
They’re doing just great!
The Maker Monster Thanks Man, I have been worrying!
Very cool!! :D
_You’re_ very cool!
@@TheMakerMonster Aw, I bet you say that to all the monsters :D
LET'S GO
genial.... eres un genio.
Moin. Ahhh...Stylus... memories! I need a Vinyl Cutter.
I don’t use it suuuuper often, but when I do need it, it’s very handy to have around
That is cool! I wish i could remember more from my high school days when i had a class that used bread boards. I remember being interested in it at the time, but went on to pursue other things. I know it's never too late, but #priorities am i right?
Just about every time I go to do an electronics project I have to re-learn every part because I’ve forgotten it all since last time. 😆
Could you please build something using Arduino Code, the teensy 4.1 and some 74hc595 shift registers? Thanks.
and do n't forget the I2C communication. Thanks!
You didn’t explain but it’s seems like a voltage divisor with a lot of resistance in one input of the arduino, but with you didn’t use capacitive sensors?
I don't think it will count as a stylophone if you use a capacitive sensors.
Besides, I believe things will be generally simpler this way.
Cool I wish I could play
Right? Me too! One day I’ll learn how to make music 😆
Hes kinda like charlie from always sunny
How do I look for that kind of mask?
Can you share for me pcb. I wana made it
Please, humans, can somebody help me find a Scheme of stylophone and code for arduino?
can you put up the code?
Buenas me puedes pasar los datos para la Arduino leonardo
How didja program that for midi??
That is darned cool!! but you can please give me the code?:)
where is the .ino file?
I DOMT KNOW HOW TO PROGRAMM WITH SOMETBING SIMPLE LIKE THIS AND DONT KNOW HOW TO START AND I KNOW I CAN DO IT WITH COPPER LIKE THAT
views dont do the justice
it cool but it hard for me to look at you , i'm sorry
i cant take him serious with that mask
Cool project man but that´s not midi
😂
:)))
Your video was so cool! I saw it and immediately thought “I’ve got to do something with that!”