i have an 07 when i start the qx56 i have code p2119 i done every thing when i push gas nothing leave car running plug in obd2 reset code bam fixed well intill i turn off. then code back so i did the auto learn. so i unpluged the ob2 and did the relearn fine for 3 to 4 starts then back to the same. so pluged in the ob again and erased code took for 20 min drive code gone but when i started up the suv i had a diffrent code was a tranny code i for get code but it was like it was slipping so i erased that code to then bam fine again im thinking maybe bad ground or somthing or maybe ecu bad
Yes, you're correct. In some cases, you might only need to update the immobilizer (IMMO) and the Vehicle Identification Number (VIN) to make the used ECM compatible with your vehicle. The immobilizer system prevents the engine from starting without the correct key, so reprogramming the IMMO is necessary to ensure your key will work with the new ECM. Reprogramming the VIN is also essential for proper communication between different vehicle modules and to avoid any diagnostic trouble codes or issues with emissions testing. Although these updates may be sufficient for some vehicles, it's always a good idea to consult a qualified mechanic or dealership to ensure the used ECM is compatible with your specific vehicle configuration. They can also provide assistance with reprogramming the ECM if required.
i have an 07 when i start the qx56 i have code p2119 i done every thing when i push gas nothing leave car running plug in obd2 reset code bam fixed well intill i turn off. then code back so i did the auto learn. so i unpluged the ob2 and did the relearn fine for 3 to 4 starts then back to the same. so pluged in the ob again and erased code took for 20 min drive code gone but when i started up the suv i had a diffrent code was a tranny code i for get code but it was like it was slipping so i erased that code to then bam fine again im thinking maybe bad ground or somthing or maybe ecu bad
If you buy a used computer will it be plug and play or do I have to get it reprogrammed as well
Yes, you're correct. In some cases, you might only need to update the immobilizer (IMMO) and the Vehicle Identification Number (VIN) to make the used ECM compatible with your vehicle. The immobilizer system prevents the engine from starting without the correct key, so reprogramming the IMMO is necessary to ensure your key will work with the new ECM.
Reprogramming the VIN is also essential for proper communication between different vehicle modules and to avoid any diagnostic trouble codes or issues with emissions testing.
Although these updates may be sufficient for some vehicles, it's always a good idea to consult a qualified mechanic or dealership to ensure the used ECM is compatible with your specific vehicle configuration. They can also provide assistance with reprogramming the ECM if required.