This Might Be The Death Of Me!
Vložit
- čas přidán 19. 02. 2023
- Tell me about your project that started as a quick fix and turned into a two week or even two MONTH long ordeal. Unfortunately i'm not in a position to let this one just sit around until some other sucker buys it in 10 years after there are trees growing out of it. I HOPE to have this wraped up in the next week, but thats starting to look more and more like a wishful thought.
Let me know in the comments what content you want to see more of!
Check out my other platforms:
Instagram: / luke_mcfad
Facebook: / fvsoutherngirl
TikTok: / fvsoutherngirl
This dude seems chill. Hope his channel goes into the millions 🎉
447,000 now, was at 16,000 eleven months ago
Luke, I don't envy your pain. I feel like you need to ask your 16.5K subscribers to sign up for a volunteer day and put us to work. I have no doubt you'd have a small army to help you renovate both boats.
I would bring my boy down
Hey not a bad idea!
I'd do it
I'm a boater. I'd help but I'm in AZ
Just finished turning an abandoned sailboat into a crabber so I'm free if you need me. I don't do fiberglass, paint, removing barnacles or any crab pot repairs but I'll work for crabs if you have any like clothes to fold or anything. @@fvsoutherngirl
Use a Modified Urethane it's flexible and will stick to the Fiberglass. You can use a Vinyl Flake in the Urethane to give it a texture or a Quartz.
I do know your pain.
Helped my father refurbish a Round Bottom Poulsbo fishing boat. He bought it from a fishman that was upgrading. Hundreds of hours sanding, grinding, removing and replacing planks, installing a period correct engine, steering, etc. Then, putting in thousands of brass screws and hundreds of feet of clinking.
Thought my summer was going to be fun... NOPE. Took 2 1/2 years from disassembly to finish.
Get you some of those restaurant quality rugs to put on your floor it’ll help your back , protect the floor, look nicer and prevent anything from sliding during rough seas !!! It’s the orange/red colored rugs with the holes in it. A thick rubber type material. You can cut them to fit the space . Trust me you’ll love it
This boat reminds me of my first 72 Chevy impala. I loved that Chevy. But at some point you have to when to stop throwing good money after bad.😊
I'm exhausted 😢 just watching this
They make a clear sealer for roofs that can be brushed or rolled on!
Stuff is awesome, I’m sure it could seal a boat!
Can’t remember the name but it’s available at most hardware stores.
Should seal the old gel coat and then some
3:47 man, fer them screw wholes, bits of Dowel work fantastic, an then a few postage stamps worth of fiberglass and reason , an she be mint
You need that crazy navy trowel on slip proof shmoo for the floor. That stuff is crazy!
This is all so you can tell your kids some day what NOT to do, or how it should be done. Seriously, you're doing an excellent job of depicting the struggle of the uncommon man. I WISH I could do all the things you're doing that I used to do! Good show!
Keep up the noble work, nice to see a young guy with ambition!
so when i worked at a caterpillar dealer years ago we used Sherman William's marine grade paint on the concrete in our shop. It was a two part paint that was absolutely tough as nails. We drove metal tracked dozers and 30 ton excavators across it without any issues you may want to look into it
I’ll definitely look into it!
Oh yes this one goes in the keeper file
Your an amazing young man, keep up the hard work.
prep work is the key to a good paint job!!!! time well spent!!! do it right and it will last!!
This channel is amazing inspiration. Seeing someone not much older then myself working hard and succeeding for themselves is incredible. Really appreciate you showing some of the struggles along with the good times. One of these days ill have ti head south and buy some crabs
Love this show you are one he'll of a guy keep up the hard work
Any decent topside paint (poly) with some grit thrown in on spots where you step and extra coats in high wear spots. Grinder with a sanding pad goes quicker than a sander but just be careful!
I’ll give it a try thanks!
You're crazy articulate, keep on keeping on
A suggestion for the floor... Get the spray in bed liner at Depot. Pretty durable stuff.
Not a bad idea! I got some paint already tho!
Keep grinding Luke!!!!!
It's all in the surface prep. If it's not clean and dry, the gel coat won't stick, it's that simple...
I’m going with paint this time
I was always taught if you do it thr right way it should be done it will last you a lot longer in the future i could never half ass something i just dont feel right you want to be pround of the work you do its much leds to worry about in the long run
Your efforts will be rewarded
I am impressed that you did this without dry docking
It’s definitely a pain to do in the wayer
Absolutely..best boat is a friends boat🤣 I have to do a haul out and blast the crap out of everything...boats are the best way to have a million bucks...start with 2 million
hahaha yes!
keep that drive alive and you will succeed in life!
I envy you, my friend. You have a lot going on, but all of it are positive. Your drive is commendable. Do it right the first time you won't have to do it again.
Can't see it from my Yard.
We could change that!
All your hard work is going to pay off and you have to give linzee a lot of credit as well.
thanks for vids ,always good, i would come up for a volunteer day, during the week is best for me
Thanks for watching! Yeah maybe!
Hey brother, they dont take years off your life, it adds years of wisdom.
The Wisdom to never buy another boat again
You go my brother I had a freshwater boat I used to pull a shrimp net off of Oak Island North Carolina and yes saltwater will eat anything up
Luke the way I see it your whole life is an adventure and we enjoy watching however it turns out! Now turn your camera on and get on with it!! Lol!
Rhino liner for the deck.
Hey bud you should watch some total boat videos about glassing, youll get the boat painted an caeaned up when you come to the realization that gelcoat over glass especially polyester glass is the way to go, btw thats a polyester glass boat
That’s a good name for a boat “Ambitious Endeavor “!
Nice window art😂
awesome vids love this
Welcome to fiberglass! 32 grit , also different types of fiberglass, they don't like each other, also scuff and apply new, before moisture embers the fresh sanding. Overnight dew bad, no super hurry, just same day
If I were closer, I’d help out where I could!
Sorry for your loss. Earbuds are hard to replace!
Thank you. Moment of silence for my air pod.
Make sure you and the crew use mask most boats have some lead paint.
Can you use a small sandblaster and a small compressor? You should paint it with the stuff they use for truck beds that spray on bed liner
good idea!
Man! I kept wanting to see you break out the power sanders or shot blasters or something that would save you from the antique hand scraper. Sometimes the old ways are the only ways, but you know, you're the youngest crabber on the big B, maybe you should consider one of those fast and furious paint jobs? Like a big crab holding a sword that runs up the side of the boat with some cool tribal tattoo camouflage all over. You would be the envy of all the old men! Oh, and play load rock and roll onboard all the time.
Eis alaska's channel is working on a glass boat like yours, the emerald isle is a beutiful build you should check it out
Genuine B.O.A.T. (Break out another thousand) AKA hole in the water into which you pour money. It’s looking like you’re making good progress though. Four decades ago I used to teach dinghy sailing and had a lot of fiberglass repair to do every weekend! Itchy stuff. Students are hard on boats, but I’d imagine a work boat is exposed to rough times too! Good luck with the project!
we are def hard on stuff!
Crazy how you came up 100k subs in 3 months
Good on you thanks ,I'd fix your roof section with a saw , just chop it off n bin it ,go a light weight frame n tarp it ,half your weight n work load
Would you like some cheese to go with that whine 🤣😂. Yeah boats suck and I’m not even a commercial fisherman 😂😅. Keep up the good work dude Much love from NC🤙
I seen a lot of boats with gelcoat paint do the same here and how are you? I use epoxy paint Valspar that’s what they use to paint airplanes with and can handle the banging around and doesn’t chip easy at all and it’s way cheaper
Flying paint chips without safety glasses or sun glasses. You need those eyes to catch crab my man.
Best way to learn.. this way next time.. it will b way easier lol 😂
You have nice weather for the next few days to get a lot done. Lol.
This is true!
"This will take 5 years off my life"
This reminds me of a comic (randy feltface i think?) That did a bit that goes ... "what ever is gonna finally kill me ... I already did it."
Pool paint works great on boats it epoxy paint!!!
Tractor paint or bedliner rino liner linex
Watching you suffer makes me sad but they way you video makes me laugh.
@fvSoutherngirl Ask Lou from tips from a ship wright here on CZcams about your gel coat painting issues. The fella is an amazing boat builder
ill look into him! thanks buddy!
That boat is like my 💯 year house I call it work camp 🏕
Have you tried Herculiner, the stuff you roll on. It supposed to be like the spray in bed liner.
I still think you should use Flex Seal paint, it’s so durable and completely water tight!
Do you think it might hide continuing issues? Thats my only fear of waterproof membranes like that is that you can't see the problem until your floating on a sheet of flex seal. still, works in the commercials.
Grinder with a sanding pad is really quick. Just pay attention!
Hard pads on a Grinder are really good I’ve found!
One day Luke will mount some fishing chairs on top for channel fans to drop a line behind the boat while crabbing.
The most interesting videos
on the net
One day builds always take longer than a day - Adam savage
Fiberglass was put down the proper way. The small first going with bigger each time leads to more edges that introduces de-lamination spots. aka impossible to squeeze out the air where the two pieces meet. Let me know if you got any questions I've spent the last 8 years working on boats, doing countless repairs and complete overhaul/rebuild projects.
Came here to say just that. Are you local to MD John, I'm in the market for just those services.
My guess would be that it was ether built with or caped with epoxy at some point and then someone tried to use normal gelcoat on it. Gelcoat will not bond very well at all to epoxy. If you want it to stick and be really durable. Use a thickened white epoxy.
Yes. Gel coat will bond to polyester resin but doesn’t bond well over epoxy.
Quick tip, set up time lapse so you can get content while working
flex seal that boat......😂
Good video
thanks!
Luckily we've had some decent weather for this time of year - but then again... All that work isn't lucky at all!
I did it to myself 🥲
Look for a zinc primer from Ameron paint. It’ll hold up pretty well
ill look thanks!
@@fvsoutherngirl it was a two part epoxy mixture, I think it was 302 Dimecote
You know what "BOAT" stands for right? Bring On Another Thousand 🤣 I think you make the right decisions brother, so you will be fine! I bought my boat 8 months ago, and I'm living on it and enjoying myself...until I got into an accident at work...now all work on my boat stopped😪 So...I will watch you work, because I have nothing else to do 😆 Keep it up Luke! Oh and here is my little project here in Amsterdam! czcams.com/channels/57VBtQIpQ-nbynO2f8H1dA.html
have you though about any of the spray on truck bed-lining stuff stuff for the floor?
Probably wouldn’t work great. Things kinda need to slide a little on the floor.
Hey would the epoxy like youd put on yoir garage floor work? It last to working on cars and chemicals. Very durable.
looks like someone just used cheap flat latex on that, I would if you what it to last and I know it's expensive Use two-stage epoxy like Interlux. I use that on the bottom of my grady white and it was still there 20 years when I finally got rid of it.
Twice as much money and 3 times as much time...yeppers that's a boat alright
You need a class in fiberglass work. You did a decent job but there are a few things you could do to make it better. If you need a few pointers on fiberglass just let me know. Free of charge.
Why don't you get deck skins. They use them on fishing boats jet ski's really easy to clean up nice to walk on very durable
Had the same problem doing paint on my boat last year worst job ever
agreed!
It could be worse. It could be a wood boat.
True that!
Get yourself a tri pod dude….. awesome content tho love watching you suffer!! Haha 🤪
It's called maintenance and work.
Luke keep going it will be fine, it’s just a crab boat. Lol ❤
I agree!
Greetings from NoVA. Let me know if you need a hand! I run a boat on the Potomac.
will do thanks for the offer!
Experience is a harsh teacher…
lmao, 100% me 11:25
Seems they didn't pain the boat properly
Invite a bunch of friends to a big BBQ with free beer, once they get there put to work
Really enjoy TikTok videos but please keep putting out the CZcams videos.
Luke
I’m a little old man. I’m no as smart as wealthy as you. Go to a paint store. Take pictures of your project. Show them what have and how you want it to .
Holaaa
Epoxy is your friend, moisture is your enemy.
Polyurethane top coat. IMO
Teardown is always quicker than the rebuild. The project car hits too close to home.
I bet!
We need a few more boat mechanics in the comment section 😂🤘🏼
they will tear me up hahaha
Do yourself a favor my friend, get a 3500 psi pressure washer and I guarantee you that you won't need to spend one dollar on sand paper or lot's of hours sanding. Just saying. And PS: Dry dock the boat before you do that, if DNR finds you sanding or pressure washing paint into the water, I just guessing , about 3 to 6 thousand dollars in fines. just saying....Keep up the good fight, love your videos...
Young Daniel Son , paint westsytem fiberglass is in every watermans shed. You ain't no crabber if you ain't got it in the shed. Where is CJ??? Btw who built your boat ? Is it glass hull or glass over wood?
The southern girl is all glass cut down!
Buddy hampton built her
Boats are like children and dogs. Best one is someone else's. Non boaters have no idea how much work and money has to go into them. Fuel is the small part. Had boats, bigger than trailer boats, since 1981. GRRRRRR! I love to hate boats.
Are you spiffin’ her up to sell? Or are you gonna run both
Probably crab out of the southern girl this year!
How old are you Luke?
U seem super young
But I’ve heard u say you’ve been crabbing for many years