HP deskjet ink advantage 3545 “the indicated cartridges are not intended for use in this printer”

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • This message has appeared in the middle of a printing job for 80 pages document. The cartridge is original, It is one year old, I have refilled it several times.
    I suspect HP deliberately stucks the printer in this menu so that it forces you to buy new cartridges.
    Anyone knows how to bypass this?
    Update: I have not found any steps to bypass this and had to buy a new cartridge, even though the old one was original. I suspect hp does this on purpose to sell more. It now works. Never again hp.

Komentáře • 51

  • @Sautou
    @Sautou Před rokem +55

    Save your 10min to watch this video. There is no solution for it.

    • @smyureka3055
      @smyureka3055 Před rokem +1

      Thankyou.. this type of idiot youtubers waste our time !

    • @sjackson5980
      @sjackson5980 Před rokem +5

      Lol. Been trying & replaced with a new cartridge only to get same message. I want to throw my printer out the window!

    • @nbkomputer1258
      @nbkomputer1258 Před 3 měsíci

      The solution is Replacing The PCA Board thats it

  • @elenadebeche4074
    @elenadebeche4074 Před rokem +7

    i couldn't stop laughing... i did the same exact thing... i felt like i was watching myself... 😂😂😂

  • @pn2543
    @pn2543 Před rokem +13

    have this same problem, menu is stuck on 'replace cartridge' or 'incompatible cartridge' for black cartridge, cannot go to home menu, tried multiple cartridges, tried cleaning contacts. Have read that HP printers automatically update firmware over wifi, so I suspect there was a buggy firmware update pushed over wifi from HP. HP support website is no help whatsoever, they claim there is a factory reset command to restore the original firmware version, but will not publish it on their own support website, they instead make you request it and then will only message you the command, keeping it secret on the website. This is truly baffling. It appears they do not want to admit to a buggy firmware update. The CZcams channel '303 Electronics' describes a factory reset procedure for the Envy 4500 - from the home screen press 'dash home dash dash', but my printer cannot show the home screen so not sure if it works. Apparently every HP printer model has a different command sequence to get to the hidden service menu, and HP purposely will not tell their customers what it is. Even the technical manual pdf links on their website have all expired. I thought Epson was the worst printer company, but this is ridiculous.

    • @monalisadies
      @monalisadies Před rokem +1

      That's the way they make us buy new cartridges

    • @sjackson5980
      @sjackson5980 Před rokem

      ​@@monalisadies New cartridge didn't work for me.

    • @sjackson5980
      @sjackson5980 Před rokem

      I did what I thought was a semi-reset, didn't fix it. Then a OOBE one cause won't work anyway. Didn't work.

  • @colinevans7134
    @colinevans7134 Před rokem +7

    What was the point showing this video,

  • @everydayserenity7604
    @everydayserenity7604 Před 6 měsíci

    Clean both cartridges, color and black. We found that our color cartridge was really smudged with ink.

  • @batulmeherali1671
    @batulmeherali1671 Před 2 měsíci

    You wasted everyone's time including yours. Insane

  • @user-xw2bo8cv5t
    @user-xw2bo8cv5t Před 11 měsíci +1

    Cartridge number is not accurate try using cartridge n.o 678 .

  • @shailendradhar2999
    @shailendradhar2999 Před 11 měsíci +1

    Never EVER buy HP printers. Why shouldn’t I be able to use scanner and other functions EVEN if cartridges go bad

  • @sommartsathapananunth4630

    what r u trying to do ?

  • @MK-dp9rr
    @MK-dp9rr Před rokem +1

    So what TF an i supposed to do with this info??

  • @a.f.9213
    @a.f.9213 Před 10 měsíci

    What's the point? I thought you were giving us a solution!

  • @eristachejosue5440
    @eristachejosue5440 Před rokem

    Ou konn vòlò wi. Tradwi pou vòlò pou Mwen souple nenpòt moun ki kapab

  • @abiolabailey7975
    @abiolabailey7975 Před 2 lety +2

    I changed my ink cartridge but still mines like that what can I do

    • @nickvlogs4634
      @nickvlogs4634 Před 2 lety +1

      Same issue plz help

    • @nguyenhoaithu6926
      @nguyenhoaithu6926 Před 2 lety +1

      me the same :(( even the cartridge is new and original

    • @nguyenhoaithu6926
      @nguyenhoaithu6926 Před 2 lety +2

      and it seems that everyone's got the same issue with the black cartridge. I tried a different cartridge but nothing happened.

    • @Howda758
      @Howda758 Před rokem +2

      THIS worked for my ancient 4630 officejet.
      1 Remove ALL ink cartridges, CLOSE Lid.
      2. Turn off printer fully.
      3. JUST keep your printer unplugged for a few minutes to allow it to reset.
      4. AFTER a few minutes, turn back on, wait until fully rebooted and you see the main screen.
      5. Retry inserting cartridges.

  • @mensreus
    @mensreus Před rokem +1

    HP is a total rip off ... its been that way for years. ... switch to Brother ... reached a point where even new cartridges still didn't work ,.. they update the software knowing its not compatible with the old cartridges forcing you to buy a whole new printer

    • @sjackson5980
      @sjackson5980 Před rokem +1

      U bought a Brother printer? I am going to have to buy one but it won't be an HP.

  • @back2nature788
    @back2nature788  Před 2 lety

    I have no ideea. I sugest you call them

  • @luli340
    @luli340 Před rokem

    Que hace por favor 😅

  • @Superstar_Giri
    @Superstar_Giri Před 2 lety

    Need to change cartridge holder .

    • @back2nature788
      @back2nature788  Před rokem +3

      I bought new cartridge and it works fine. It s just a way of making consumers buy new products. There was nothing wrong with the old one exempt I refilled it. A good dozen times

    • @littleworld555
      @littleworld555 Před rokem +2

      @@back2nature788 I brought new cartridge but no use. Problem still exists.

    • @sjackson5980
      @sjackson5980 Před rokem +1

      ​@@back2nature788 This is for ppl who don't refill theirs. I only buy new ones & replacing it does not work.

  • @DecouverteInformatique
    @DecouverteInformatique Před 6 měsíci

    Brohther!! Stop making people waste their time by viewing yours tutorials!!!

  • @davidosemudiamen6807
    @davidosemudiamen6807 Před rokem +5

    The essence of this video is defeated. No value addition at all. Take it off

    • @back2nature788
      @back2nature788  Před rokem +1

      I just want to know if anybody else has this problem and why. It is a mystery to me why my printer refused to print with no hardware problem. Why do you think that is happening?

  • @milanyelavelasquez7780

    😅😅😅😅 awesome 😂😂😂😂 you make me laugh 😅😅😅😂

  • @samuelkt4865
    @samuelkt4865 Před 11 měsíci

    Bluffmaster

  • @jerwinefondo-pf5bi
    @jerwinefondo-pf5bi Před 3 měsíci

    waste of time

  • @brianturner8698
    @brianturner8698 Před rokem +1

    try these button sequences, they're for the HP Envy 4500 but might work for you. its usually a combination of HOME and - buttons.;
    Service Menu;
    - , - , Home, -
    Engineering menu;
    Home, - , - , Home
    Support Menu;
    Home, - , Home, - , -

  • @batulmeherali1671
    @batulmeherali1671 Před 2 měsíci

    Rubbish

  • @subhashchandrasahgal8260

    ऊंट हो क्या

  • @rishvinraj446
    @rishvinraj446 Před rokem

    Just wasted my time

  • @vigneshxbs4748
    @vigneshxbs4748 Před rokem

    waste of time