VICTRON ENERGY SMARTSOLAR CHARGE CONTROLLER MPPT RS 450/100-Tr WITH BLUETOOTH
Vložit
- čas přidán 8. 09. 2024
- Maximum charge current: 100 Amp
Maximum DC PV Voltage: 450 V
MPPT operation voltage range: 80-450 V
Number of trackers: 2
Weight: 17.4
Dimensions: 17.3" x 12.3" x 4.96"
Victron Energy SmartSolar MPPT RS is a 48 V Solar charge controller with up to 450 VDC PV input and 100 amp output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required
Victron Energy SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App
Daisy Chain Additional Units: Victron Energy SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply daisy chained to each other with an RJ45 cable
Victron Energy SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes
Victron Energy SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron Energy smallBMS and other types of Victron Energy BMS with allow-to-charge signals
Battery Charger
DC-AC Invertrs
Combined Inverter/Chargers
DC-DC Converters
Isolation Transformers
Batteries
Battery Monitors
Diode and FET Splitters
Specifications:
Charger:
Programmable charge voltage range: Minimum: 36 V, Maximum: 60 V (8)
Charge voltage ‘absorption: Default, 57.6 V (adjustable)
Charge voltage 'float': Default, 2 V (adjustable)
Maximum charge current: 100 A
Battery temperature sensor: Included
Battery voltage sense: Yes
Solar:
Maximum DC PV voltage: 450 V
Start-up voltage: 120 V
MPPT operating voltage range: 80 - 450 V (1)
Number of MPP Trackers: 2
Maximum operational PV input current: 18 A per tracker
PV short circuit current reverse polarity protection (2): 20 A per tracker
Maximum DC output charging power: 4000 W per tracker, 5760 W total
Maximum PV array size per tracker (3): 7200 Wp (450 V x 20 A)
PV Isolation fail level (4): 100 kΩ
General:
Synchronized Parallel Operation: Yes, up to 25 units with VE.Can
Programmable relay (5): Yes
Protection (6): c, d, e
Data Communications: VE.Direct port, VE.Can port & SmartSolar Bluetooth (7)
Bluetooth frequency: 2402 - 2480 MHz
Bluetooth power: 4dBm
General purpose analog/digital in port: Yes, 2x
Remote on-off: Yes
Operating temperature range: -40 to +60°C (fan assisted cooling)
Humidity (non-condensing): max 95%
Environmental condition: Indoor type 1, conditioned
Suitable for wet locations: No
Pollution degree: PD2
Maximum altitude: 2000m
Over voltage category: OVCII
USE THIS AFFILIATE LINK TO BUY YOUR SOLAR PANELS FROM SANTAN SOLAR:
www.santansola...
USE THIS LINK TO BUY YOUR LITHIUM BATTERIES AND SAVE 5%
BATTERY HOOKUP PROMO CODE
batteryhookup....
GOLDEN MATE ENERGY
AFFILIATE LINK
goldenmateener...?sca_ref=4914977.QFhdjiqgNF
10% Coupon Code:
JWSOLARUSA
MY PRAYERS TO YOU AND MAMA . 🙏VERY NICE MPPT CHARGE CONTROLLER RESEMBLING A VICTRON INVERTER .🤗CONTINUE YOUR JURNEY AND MAY THE SOLAR BE WITH YOU .🤗
Thanks brother
My belated condolence to you and your family
Thanks bro.
I hope all is well with you.
Very nice
Thanks.....
I am you liked it.