Outstanding round house after so much work that gone into its progress.Just Awesome work indeed,very impressive lighting within all areas of the roundhouse.Watched every video in its build.It will take pride of place upon your layout.I am sure you do have a few fiddly bits to do then its completed.Your on your home would run!!! Congratulations ---Carol
Thanks Carol and not long to go now, just doing the lead in rail to the Turntable. So i can have my Loco's go straight into the Roundhouse and then program this Turntable cheers Robert
Wow! The realism you’ve achieved has compelled me to comment. Congratulation on an excellent piece of work. I keep projecting myself visiting this exact locale just so I could walk around and observe the operations and the various engines pulling in and out of the round house to get the servicing needed. Simply impressive! I could go on and on.
Brilliant work. The lighting is awesome. All the lighting inside the shed, pits and outside really is outstanding work. You have put in some serious work there. A real focal point that your doing real justice. Clint
Absolutely amazing! You put so much work into this and it shows. Can’t wait to see this and all of your buildings in your future videos. Thank you for sharing.
Wow that is looking awesome! that is a lot of work you put into that man did it pay off. Can't wait to see it finished with engines in it will it fit the big boy? Speaking of the big boy have you been watching the videos it's been making its route 4014 and another one until your next video the good and be safe
Matt i have been watching some video's of this monster, and i hope my big boy fits. Haven't tried this as yet but will when the lead in track onto the turntable is connected cheers Robert
Looking good Robert, you must be really proud of your hard work. Next I would like to see an automated turntable which turns to each track and stops automatically at the specified angle/degree.
Well Robert I'm impressed great job , like let there be light for sure , good thing they are LED's , incandescent would cost a fortune for hydro ! Cheers !
It looks awfully dark inside there still, I'm not sure that you've got enough lights inside or not. Just kidding. You've done a great job on the lighting. It looks really nice. It took alot of work but it was worth the effort I think. 👍
That is sweet, alot of work. Why is the bridge so touchy to find the spot? I was going to get a round table but i dont like that you have to keep clicking the button to center the rails. Anyways really nice job!
Dobs, the reason i was clicking the button to centre the rails was because i hadn't program the turntable. Here is the link to programming czcams.com/video/WJmUgWoSl6k/video.html cheers Robert
Outstanding round house after so much work that gone into its progress.Just Awesome work indeed,very impressive lighting within all areas of the roundhouse.Watched every video in its build.It will take pride of place upon your layout.I am sure you do have a few fiddly bits to do then its completed.Your on your home would run!!! Congratulations ---Carol
Thanks Carol and not long to go now, just doing the lead in rail to the Turntable. So i can have my
Loco's go straight into the Roundhouse and then program this Turntable cheers Robert
What a showstopper! It will be incredible once fully sceniced.
Thanks and will be interesting to see how this looks with all the scenery cheers Robert
That is awesome Robert! The lights make all the difference in the world. Cheers, Danny
Danny yes the lights really do make this cheers Robert
Very nice, what an awesome workplace with all that lighting.
Best light project yet.
Thanks for sharing
👍👍👍😎😎😎 Cary
Thanks mate and like the way this has turned out cheers Robert
Wow! The realism you’ve achieved has compelled me to comment. Congratulation on an excellent piece of work. I keep projecting myself visiting this exact locale just so I could walk around and observe the operations and the various engines pulling in and out of the round house to get the servicing needed. Simply impressive! I could go on and on.
Thanks and when i get the lead in track to the turntable, i will be able to show more Loco's storing in the stalls cheers Robert
Fantastic lighting work. Really makes the whole roundhouse pop. With inside details it's going be amazing
Peter not long to go now just a couple more things to do cheers Robert
Brilliant work. The lighting is awesome. All the lighting inside the shed, pits and outside really is outstanding work. You have put in some serious work there. A real focal point that your doing real justice. Clint
Clint thanks and will be good when i have the lead track to the turntable cheers Robert
Absolutely amazing! You put so much work into this and it shows. Can’t wait to see this and all of your buildings in your future videos. Thank you for sharing.
Derek will be good when i get the track in for the turntable so all the loco's can be stored in the roundhouse cheers Robert
when I get around to my turn table and round house, I will have to watch this play list many times.
David a lot of work doing the Roundhouse cheers Robert
Looks fantastic Robert, you must be pleased with the way it's all turned out, you've put a lot of work and effort into it. Cheers John.
John very pleased from this end cheers Robert
The roundhouse with the lights looks beautiful. Keep up the excellent work. - Paul
Thanks Paul and thanks for watching cheers Robert
Robert you did a excellent job on this
Thanks James
Fantastic...looks great. Mark
Mark thanks cheers Robert
Very nicely done, Robert !! Congratulations. - Dean from Minnesota
Thanks Dean from Minnesota and thanks for tuning in cheers Robert
Robert You are the Man for sure.
The Auzzie Power company just called looking for you LOL.
Andy M
Was wondering why my power bill went up lol cheers Robert
Wow Robert it looks great!
John i like it as well cheers Robert
By far the crown jewel of your layout Robert!!
Darren i agree with you cheers Robert
that looks incredible Robert...good job 👍👍...thx for sharing.. vinny
Thanks Vinny cheers Robert
Incredible work, Robert. Great lighting. - Drew
Drew big difference from no lights to lights on cheers Robert
Well done my friend, that’s quite the lighting job.
Thanks mate not long to go now cheers Robert
Excellent job with the lighting and the controls for the lighting. 😎
• Cheers from The Detroit & Mackinac Railway 🚂
Thanks Gary cheers Robert
Robert, truly inspirational. Will have to do similar in N one day.
Look forward to your next instalment.
Thanks George and would be good to see in N scale cheers Robert
Wow that is looking awesome! that is a lot of work you put into that man did it pay off. Can't wait to see it finished with engines in it will it fit the big boy? Speaking of the big boy have you been watching the videos it's been making its route 4014 and another one until your next video the good and be safe
Matt i have been watching some video's of this monster, and i hope my big boy fits.
Haven't tried this as yet but will when the lead in track onto the turntable is connected cheers Robert
Looks great thanks for sharing....
Thanks mate cheers Robert
Looking good Robert, you must be really proud of your hard work.
Next I would like to see an automated turntable which turns to each track and stops automatically at the specified angle/degree.
Thanks and really like how this has turned out. And when this is programmed it will stop at each track
that you need to use cheers Robert
@@csxmad Awesome glad it can be programmed
That looks great!!!
Thanks cheers Robert
Dude you did an awesome job on the round house.
Thanks Robert was worth it in the end cheers Robert
Certainly well light up now Robert , nice work
David all lit up and waiting for some loco's cheers Robert
that looks amazing
Joe was good to get all the lights finished cheers Robert
That's awesome. Love the pit lights.
I too like the pit lights and ceiling lights cheers Robert
Awesome work Robert - I wonder how you will attack your transfer table - looking forward to more. Regards Kevin
Kevin not long before i do the Transfer Table cheers Robert
The lights are on but no one is home. Time to fill it up with loco's and details.
Scott lights are on but i need that lead in track happening before i can fill this up cheers Robert
Amazing work!
Thanks Michael cheers Robert
Well Robert I'm impressed great job , like let there be light for sure , good thing they are LED's , incandescent would cost a fortune for hydro ! Cheers !
David thanks and leds are the why to go cheers Robert
let there be rock .....
Top song lol cheers Robert
You could see that thing from outerspace!
Lol yes you can cheers Robert
It looks awfully dark inside there still, I'm not sure that you've got enough lights inside or not. Just kidding.
You've done a great job on the lighting. It looks really nice. It took alot of work but it was worth the effort I think. 👍
William i thought that as well lol cheers Robert
This is fantastic! What did you use for the ceiling lights?
I got these from e-bay china cheers Robert
Will a SD70ACe fit in the roundhouse and on the 90 foot turntable because I’m getting one
Yes it will and the turntable is 130 foot so a Big Boy will fit as well cheers Robert
Awesome! So now what are you going to work on?
Mark still more on the Turntable lead in track cheers Robert
How much did it cost? How much space does it take up? And congratulations.
This cost about $200 and the space is about 4feet square cheers
Great job. You are a craftsman. Did you glue your tracks to the turntable?
Richard i have just nailed this so far cheers Robert
Do you glue the roof on?
No i didn't glue the roof on, i need to be able to take the roof off just in case i have to do something inside cheers Robert
amazing work! Love your backdrop is it hand painted?
The backdrop is a photo print cheers Robert
@@csxmad
cool! thank you
@@heavyobject4809 Anytime!
AWESOME AWESOME!!
Muse
Thanks David means a lot cheers Robert
That is sweet, alot of work. Why is the bridge so touchy to find the spot? I was going to get a round table but i dont like that you have to keep clicking the button to center the rails. Anyways really nice job!
Dobs, the reason i was clicking the button to centre the rails was because i hadn't program the turntable.
Here is the link to programming czcams.com/video/WJmUgWoSl6k/video.html cheers Robert
@csxmad oh I see, ok thats good to here i thaught maybe thats just how it was. Thank you