Yamaha Mt-03/660/Full service 10000km
Vložit
- čas přidán 13. 09. 2024
- I just wanted to put out a video that will tell you what you should do when your motorcycle passes 10000km.
I like to try and keep my motorcycle in pristine condition and this is how i did my service.
Also there are some outtakes on the end of the video , plz let me know in the comments if that is something that i should do more or less in the future.
Enjoyed that! Mines definitely due a service and now I have no excuse. Thanks for making the video 👌
Thank you so much,glad ppl found it😅
awesome video! I have the mt 03 660, and I am grateful to you for posting this video. I can't wait to change my own filters and oils! Ride safe!:)
Thank you mate🤜
I love my MT03 660. I’ll keep an eye out for more of your vids.
Very satisfying
And as always
I was entertained
Thank you mate:)
Thank you so much bro, as a beginner rider this helped me a lot
Thank you man:)
I've had the XT660X but had to sell because of moving... I'm actually considering this one until I get (or find) my dream bike.. I also have the same manual ;)
This one is long gone but i still remember her awsome bike🤘
Thanks! Very good video!!
@5:48 the music you had going almost sounded like a squeeky rag! 😎😁
Very good video and helpful,do you know what kind of tools i will need to adjust the steering wheel? I'm a new rider and just bought the mt03 660 as my first bike but something feels off
you have free manuals on manualslab,find there what you need to make any ajusments.
nice Video!!
Keep it up and Thumbs up!
KUKI
Thank you so much much more incoming😉
On top of the oilfilter housing there is a small bolt. After changeing the oilfiter open this one and after starting the engine observe that oil is coming out here.
Did that initially since i forgot to do it while filming,but nice that you spoted that🤜
When you changed the oil and replaced the filter shouldn't you bleed the filter housing from the top bolt of the filter cover, when you started the engine? I believe it is the same with the XT engine, your manual should say so. Correct me if I am wrong. Top video btw,
Havent read anything about that in manual and the top bolt is case bolt so i dont think it is ment to be done that way.I did blead it b4 from the botom bolt but i never felt that was air coming out.Maybe the oil system is different on mt.IDK😅
nice video,to add some info. air filter has to be oiled a little bit, not just air cleaned
Thank you,yes you are right but i bought and replaced it with new unit 2 weeks later😉i also did not blead the air on camera from filter housing and that shuld be done as well.
minarelli engine, is a dry sump design and you have to bleed the oil
00:36 "I will put a high-performance plug"... GREAT but I would like to know what BRAND & MODEL did you put & are you happy with the change ? Did you use an Iridium spark plug ???
Thanks again for your CZcams; I can tell from it that you're a perfectionist... I would love to have a mechanic like you.
In all honesty i dont know the brand on my mind now i have used the same brand on meny bikes and it worked perfectly every time.I buy them localy for years now but i never gave 2 cents about full spec of the spark plug.
You are right i shuld look into that.
Thank you for the genuine comment much appreciated mate🤜
What size key did you use for the spark plug? Cheers!
May I suggest something: When I remove the petroltank I always store it high. When put on the ground there is always the risk of something falling on it.
Two years later... I'm still riding my 2010 660 MT03 & I'd like to know if your fuel tank was empty when you unplug all the fittings under it & remove it from the bike ? Thanks for your answer 😀😀😀 PS: So far, I changed the battery once but without removing the tank, just lifting it as you did at the beginning with a wooden bar to keep it lifted.
@alainremi267 no it does not need to be empty,it won't leak when you disconnect it.
Have you tried riding it with the top of the inner tube aligned with the top bracket? The service manual recommends aligning the top of the inner tube with the table. But they all come out with the top a little higher.
I realy don't know what you are reffing to mate?
@@dragonmodgarage2773 I'm referring to the inner tubes of the front suspension. The manual says that the top of the tube should be aligned with the table, but none of them come like that. They all come about 3 millimetres or more above the table. Notice that on yours the inner tube cover is well above the table.
hello friend! your bike is too beautiful, congratulations! I speak here from Brazil, I would like to know if you can easily get parts for MT 03 2008 where you live? Here in Brazil this bike only sold in 2008, now it's hard to find some spare parts. I have an all original one and I was wanting to change the top frame of the panel but I can't find it anywhere.
Here i have yamaha distribution centar so original parts are not the problem.
The aftermarket parts however you can find in some europe internet stores but shiping always cost arm and a leg....
You were on the right side for the air filter you needed to be on the left side.😁
Ye but i wuld of opend it anyway to clean it.🤣
Awesome video, thank you!
I have the mt03 is so much fun, but the headlight and high beam (light) only work when i am driving and they keep on vibrating. Do you know why?
i honestly dont know mate maybe the rubber on the mount is worn of or it is lose somewhere.
@@dragonmodgarage2773 thank you!
How many liters did you use for (oil and coolant) ?
@@abdelmalekagha534 about 3.5 lof oil and a bit more then 1 L of coolent .
Awesome bike, I own one myself and was thinking about it wrapping a few parts in vinyl as yours!. Did you wrap it yourself? If so, how difficult was it?
Ye i wraped it with techwrap carbon and red.Now red is thiner so it is easyer to work with where carbon is much thicker and difficult to work with.If you havent wrap b4 mate id say take single color for the first time and you will see how it goes.
Also you will need 50x120 to wrap the whole bike👊(with no mestakes ofc)
Tank needs to be wraped in 4 sections as well if you check out my detailing video you will see where the lines are.
When removing the fuelhoes from the fueltank is there a stop to prevent the fuel from puring out of the tank? Or was the tank already empty?
Yes there is a stop if you pop it out the fuel wont come out.but try not to do it with the full tank
good video thanks bro
Thank you too mate👊👊
Hi, mate. Does yours usually melt the oil scale when you ride hard? Mine throws a lot of oil in the air filter box. It gets dirty on the scale and drips on the floor.
No mate i have no problem with that.
@@dragonmodgarage2773 How much oil do you put in?
Doesn't even dirty the air filter?
@@dragonmodgarage2773 How much oil do you use on changes?
@@dvdmcd 3.5L
@@dragonmodgarage2773 This is more than the manual recommends, that is 3.1 with filter or 3.4 at most. And your bike doesn't spill oil out. Curious! 🤔
come to turkey 2012 model 😌
I have 2021 MT-03 but this one is completely different and engine is 660cc?
Correct different bike completely this is a single cylinder 660cc more power and torque.
Is it possible to put a 170 /60 /17 rear tire for this bike?
I realy dont know it hase some extra space in the back but it is not something i looked into🤜
How much oil do you put in and how much coolant do you put in?
3l oil and then you pur untill the level is in margins,about 1 l of coolent
Nobody shows how to change spark plugs
no1 can show it, they put so many things around it that you can barely fit your hand :)
@@dragonmodgarage2773 let me ask you is there one or two spark plugs on our MT 03’s
After 40 years I’m confused 🫤
@@evangelosstefadouros1351 one mate😉
@@dragonmodgarage2773 oh that’s good now I have an extra one since I bought 2 two 😉
Let me ask you any specific I can check for that backfiring when letting go of throttle ?
@@evangelosstefadouros1351 dont weist your time on that it is just as it is cant really change it...
Che olio usi?
I would be very grateful if you could help me.
What do you need?
@@dragonmodgarage2773 ragazzo, qui in Brasile non hanno pezzi nuovi, quando lo troviamo usato e come hai detto lì e costa un occhio! Se non ti dà fastidio, potresti contattarmi tramite whatsapp da un negozio che vende ricambi mt03 2008? chissà che posso comprarlo in qualche negozio lì e il venditore me lo spedisce per posta. Ho bisogno dell'alloggiamento del pannello superiore.
@@dragonmodgarage2773 I need the taillight too.
They have it on ebay it is about 50 or so euros + shipping
Ništa bez mačugu(motku)
Vlađža brat moj🤜