This FPV Drone is a Pocket Rocket! Axisflying Manta 3.6" Review
Vložit
- čas přidán 25. 06. 2024
- The Axisflying Manta 3.6" is small but feels a lot like a 5", and it goes very fast too!
💰Buy the Manta 3.6"! 💰
Banggood
www.banggood.com/custlink/vmD...
Axisflying
www.axisflying.com/axisflying...
❤️Follow me on Social❤️
/ rimzler
/ rimzler
/ rimzler
/ ucyo6efjpjjugmu0cnobmpcg
👕Get Rimzler™ wear and accessories!👕
teespring.com/stores/rimzlertm
⚔️Toss a coin to your Rimzler!⚔️
paypal.me/rimzlertech
00:00 Introduction
00:48 Unboxing
01:48 Specs
05:53 First Flight 1100Mah 6S O3
11:05 Second Flight 1300Mah 6S Full Gopro
16:54 Final Opinion - Jak na to + styl
love your reviews.. almost 10k lets go!
Amazing! Thank you!! 😁👍
Nice video. Flies amazing 🙌🏽🙌🏽🙌🏽
love this little beasty
Thanks very much for the great review.
Looks like a nice flyer.
I'm going to have to get one now. 😀
I will use your link. 👍
I love to watch your reviews. Always enjoy your videos. Keep it on! ❤
Can‘t wait for the sub250 drone comparison!
Thank you! With grandma in the basement I'm slower to make videos, will try to make it happen for next week anyway!
@@Rimzler Family first!
Nice review, very nice drone. Looks like good build quality!
After a month of debating on different 3 inch drones I went with the Manta 3.6. Love your channel! Thank you for making these review videos. They helped make my final decision 🍻
Been a while since I tuned in, been a while since I last flew, great to see your channel growing, i think you have about 9000 more subs than you had when we started chatting. Well done bud.
awesome review mate. keep it up
Thank you so much!
Wow, the drone is fantastic... But also your fly is top! Great 👍
Best hair in all of FPV 👊👍👍
This drone is 308g dry weight. Add 50g more and you might as well fly a 5".
I'm not hating, but I really wished they made it ~250g dry weight to fly with a 650mah 6s coming in at about 370g all up weight.
If you want sub250 with an O3, you will most probably be at maximum 1404~1604 motors. The Aos 3.5 O3 is the only one I can think of as sub250.
The gemfan 3630 are ideally used with 2004 motors. Ask me how I know: the guy who developed and tested the 3630 props for gemfan spoke to me about it.
Side note:
We need more 4" props 😅
I weighted it dry at 280g without the propellers so should be about 290 with them, for sure is not light but it's basically a compressed 5 inch! I can't wait for sub250g options tho, trading power for stealthyness, that's where 3.5 inches shine imho!
@@Rimzler if you want stealth, try some hqprop 89mmx8 .
You might need motor output Limit though going 8 blade.
I love my little vista based 3.5 inch, and have had my eye out for an O3 based one to succeed it since I started with O3, this looks very interesting!
Crazy fast and powerful, a bit heavy maybe for 3.5 inch, I try to be sub250g at that size
Great Drone.. Like it
It's a rocket!
Nice review, definitely buying this one
Did you buy one
Sembra fatto molto bene!❤
Nice drone,great video👏👏🤌🤌
Thank you!☺️☺️
Next time might want to use both battery straps.. Mine almost flew out with this drone. Insanely fun flyer and awesome review!
Yes it's a good idea, has the power to make the battery slide out!
The 3.5 bandwagon has just arrived in Italy 🙂👍
🤌🤌🤌🤌 ahahah it's always been here, the smart35 is one of the drones I used the most... Until it got seized by police🤭🤭
Where are you ordering drone stuff in Europe? I am from Slovenia, and not sure where are the best prices. Do you have any sites in Italy maybe? Or are you ordering from Banggod?
@Rimzler where you able to see if their claim is true that it can actually go 180kmh???
@@Rimzlercan I ask why did they seized it? I’m new in fox and I would like to know what to do in order to be chilling when I’m flying😂
Bro I love your accent 😅❤️
Okay the refector battery strap is great only if it landed right side up but usually when it comes down it comes down heavy side down so having a reflective bottom plate would be ideal for all drones. My Roma F35 has 2203.5 motors and I find it ideal for this size drone. It's really fast and I'm glad to see the similar size in this. I'm getting one now
I had the F35 with their beefy 4100kv mamba motors... lost the drone but it ripped! Loving this 3.6 though! Good luck with it!
You will see it only when is dark tho, having a good beeper is way better
hi thanks you for the reviews
can you tell how to set up the gps
or if you have vidoe to setup the gps on betaflight
6s?! Yes please!!
Hi Rimzler, I picked up the Manta 3.6 frame, stuck a T Motor F7 board in it but messed up with 1507 motors. I just ordered 4 Xing 2295s and will put those on tonight. Thanks for the video/info bro!
Is it flying good now?
RIMZLER! Love your videos man. Can this drone be flown indoors for real estate fly through? Debating between this and Cinebot30. The speed of this thing has me wanting one haha
Well this thing has crazy power to weight, it's not the best candidate for indoor flying, maybe putting a 4/5 s battery would tame it a bit lol
hi.. do you have cli dump for this drone? Or may I see the PID setting?
Does this have angle mode also ?
Hello friend, how many KV are these engines?
Good review 👍
I noticed you useing DJI FPV controller 2 how do you like it? Is it any good?
Thank you
It's usable, not the greatest but it's the only one that can fly both the avata and regular FPV, and without adding a receiver as well! So for my use case the pros outweigh the cons
@@Rimzler
Thanks for reply 👍 If you get a chance to do review on AOS 3.5 O3, Emax Babyhawk 2 O3, Iflight Evoque F4 O3 That would be great. I think many people would like to see those reviews too. 3.5 - 4 inch are more popular these days than 5inch for many people I would say. Specially under 250g category is more interesting for many people just because is less hassle with all the registration and stuff. I like to watch your videos you are natural funny character in the good way 😃
Keep doing good job, all the best and have a good day 👍😎
Witch you prefer betwen Manta 3.6' vs Domain 3.5' ?
I feel like the idle can be so low that inverted hang is wayyyy more than youd think
Have you tried the Nazgûl Evoque F4? Curious how it compares?
I've been recording the unboxing today and will fly tomorrow if doesn't rain! Very curious as well!
@@Rimzler Excited to see what you think!
Would do 4s
Ciao volevo chiederti io possiedo già un avata 3.5 ma vorrei qualcosa di più spinto per fare freestyle mi consigli il manga 5 o 3.6 sono un principiante grazie
Il 3.6 vola come un razzo e dovrebbe riuscire a sostenere un po' più di abuso essendo più piccolino
What settings do you use for Gyroflow?
Normally 4:3 2.7k, dlog sharpness and nr -2
Can I fly with Agus pro 55A f7 , will it fit for 3.6inch manta ?
Probably yes, check the mount size
Im new to the fdv drone hobby and i just got the manta 3.6... to my surprise after trying to contact axisflying they told me that the c224 2750kv motors are discontinued!! I wanted to order some so I can have some spare parts. Can someone help me with what motor can I use? Will different motors mess with the configs and flying of the drone? Unfortunatly I dont have this kind of knowledge! If someone can help me that would be really appreciated!
C257-2 Axyisfling. Thank me later
What do you recommend for a beginner/novice? I fly regular drones but never fpv
I would start with an avata, it has all the safeties to learn FPV gradually, the gear it comes with is compatible with regular FPV drones once you grow it out and it has great resell price! Sounds like a good investment especially with DJI care!
@@Rimzler thats what i was thinkin!!
It's big and noisy, but I find it pretty versatile myself!
@@Rimzler awesome i will try it out... once i fin8sh paying off my air 3 hahaha
Video ben fatto, Dovresti farne anche in italiano!
Did you fly with diatone f35 ?
Not yet, gotta try😂😂
Hello
Any vibration on the footage?
I didn't see any with all the configurations I flew with, looks like the frame is great and that silicone mount is working!
@Rimzler Thanks for your kindly reply, then I'll wait this product arrives to my country. Happy Flying and Stay Safe!
$600 3 inch. lol
It's come with O3