@@Bluedhalias tape slows you down! Take your time and get good at cutting in and it's doesn't take that long. Not a bad idea to put some on your base boards to stop drips but I don't recommend taping up to the wall. Another reason is paint bleeds through easy
Yeah, cleaning the walls takes more time than actually painting them. Also covering all the stuff you’ve moved to the center of the room can take some time too.
What he did was he dunked the roller in the paint and didn’t ring it out on the bumpy part of the tray (I don’t know the terms😂) so it would be covered in a lot of paint. Then he spread it on the wall and then went back over it, so even if the roller was running out of paint there was still the extra he had on the wall. Then all ya do is apply a good amount of pressure and you get a nice even paint coat. Hope that cleared up some stuff😋
Well actually he really should've went back and got more paint on the roller about half way through that wall. So id say he is just making his job harder than it has to be
Everyone spontaneously inspired to paint a room realizes,3 hours in, that you are still cutting in the edges and just may have made an irrational decision. Lol
deserves every penny paid. As long as the paint made it on the wall. IDGAF. says this goof off who had paint all over myself. More f*qed up than a soup sandwich my friend likes to say
@@Zazezoodoesnt matter how long it takes, it matters if its done, and if its done well. if its just as good quality work in a fraction of the time, thats much better and worth more even than if it would take someone else 3 days to finish
Right. lol Still impressive to get the main part done that fast, but this is def the easiest, quickest part. Also, I'd imagine two coats when on to stop cover any light spots, but I could be wrong.
En tant que professionnel, je sais que ce qu'il fait ne sert à rien : s'il ne repeint pas trois couches supplémentaires, la couleur marron apparaîtra rapidement une fois que la première couche sera presque sèche. Ne pensez pas que les travaux seront faits si rapidement, car les murs sont souvent dans un état de délabrement et contiennent du froid, de la moisissure et des fissures qui doivent être réparées avec des matériaux spéciaux... L'essentiel est que ce que vous voyez sur CZcams n'est pas correcte. Salutations du Maroc 🇲🇦
@@solventabuser77 Unless its with an actual stopwatch, or a digital timer, counting isn’t exactly the most accurate thing, you could count too slow, or too fast, only way to truly know if it was thirty seconds is a digital timer of some sort
@@BrainScramblies There is no "wringing" it out all that it does is make the paint even around the roller so u don't drip everywhere, it slightly loses some paint but most of it stays on the tray for the next time you are "wringing" it out generally u get the roller soaked, do one section the width of the roller top to bottom, then get it soaked again, this man is going to have to do this another 4 times unless the contractor hes working for likes thirsty walls then all is good other than the lines left from uneven paint
The power of good quality paint. A single roller fill of it actually covered the entire wall without any dark spots and the need of refilling the roller. Where I come from, the paint sold here (any brand) is so damn thin that you need to go for about 5 coats or more.
@@patrickkelly8512 well, my bad. I did not phrase my comment correctly. I tried to say that with a single coat he managed to basically cover the entire wall. Obviously a 2nd hand will finish the job. I also didn't give the context that I live in a country in which paint quality is very bad and no matter the brand, it will never coat as good as the one in the video did.
Aura from Benjamin more paint... is one of the good ones that doesn't need 2 coats .. but 30 seconds to cut all those outlets base mounding windows and corners .. he probably took 30 minutes or more to do this wall, base on the wide of the cutting
Can you guys provide the make and model of the roller and the tray because those are not what you buy at a local Home store. Also how about doing ceilings (with high hats in them) I always miss spots. Thanks.
Everyone who pressed like for the video either you are a painting expert or that painting the wall temporarily fills a void in your apartment, which makes you feel good and makes you tab like. 🤓
@@SullivanFamilyChaos Are you that confident with every uninformed assumption you give? He quite literally manually rolled. It's not mechanical you imbeciIe.
How to paint a wall in 30 seconds... After you've painted the top, bottom, left and right, and around the electrical sockets, light switches and windows
When you were born after probably 9 months is that when your parents made you? You moron. Always looking for the smallest things to put down people. Get a grip
@@slickrick364 Lol, incorrect. I didn’t know what I was doing when I first started drawing and now I’m good. Just because you have the ability to speak, doesn’t mean you should, Rick.
Once all the cutting in is done, walls are fast and once all the tape is quickly put on the woodwork the painting fast too. I am a painter of quite a few years. Painting is a blast and the finished project looks great. There’s nothing like fresh clean paint and Voc free.
I took way too long for the boss's liking painting one of his slum apartments and he showed me how to do it. DO NOT REMOVE SWITCH or PLUG COVERS and CUTTING in doesn't need to be that ACCURATE. The next day I did a whole two bedroom apt without getting a brush wet! (And he was HAPPY!)
m.czcams.com/video/ggoJFaE71W8m/video.html.czcams.com/video/ggoJFaE71W8W/video.htmlelcome to Gboard clipboard, any text that you copy will be saved here.Welcome to Gboard clipboard, any text that you copy will be saved here.Welcome to Gboard clipboard, any text that you copy will be saved here.
@@zaymilo2761 yeah he already cut in on the edges and the outlet. But are you really going to say nothing of the fact that he painted an entire 25-30 foot wall without returning to the paint pan ONCE?! Come on.
De acuerdo contigo. Sacar los muebles, cubrir otros, proteger el piso, colocar la cinta, pintar los extremos con brocha - subir, pintar, y bajar de la escalera, moverla de lugar, tantas veces como sea necesario - previamente comprar los insumos... claro que lo más fácil es pintar las paredes Con todo eso, es muy satisfactorio el resultado 🤗
i have OCD and very controlling in my home. i have to renovate my whole living room (big room). i have uneven walls, so first before i can paint i have to even the walls ☹️ the materials are in my home since weeks, but my panik doesnt allow me to begin with the caos 😂 i know, stupid and first world problems. but i can‘t change that
I've been painting for 70 years, since I was 3. This technique works well on new builds and other people's houses.... If it my own house. I use a 1 inch roller so it takes longer so I don't have to play with the kids.
Not really, when it’s dry you’ll see nothin. Plus that’s only the first coat. It’ll need another one definitely. You can throw the first coat on like that providing your not leaving track marks in the paint and you’re laying it off properly.
@@beasthunter7480 the wall is already painted so needs no primer. He’s using a high opacity paint, a good trade roller and has a solid technique. One more coat will do it.
As an electrician, thank you for not just rolling over outlet boxes with some masking tape over the outlet. Destroys new receptacles faster than half the painters care to realize
@@stephenfresh1754 paint on terminal screws or inside the outlet is just plain bad for outlets and devices. What’s worse are the painters that paint over boxes and cover wires in paint. It’s just lazy and bad practice. Common sense honestly.
Exactly. How long did it take him to paint the edges and tape up the outlet? Prep work probably took at least another 30 min no matter how good he is, if not more.
@@JOHN.hennry taping outlet? Why the fuck would you tape the outlet? You use a paintbrush to outline the outlet, Half a minute on each outlet and if you are a little careful around them when painting it, No need to tape it. Im a housepainter, and I only ever taped an outlet when I was an apprentice. I would much rather be concerned about the lack of paint being put on the walls.
@@jooly_garxia complete resurrection of the wall, yeah?! Drywall patching, picture mounts and fine cracks...earthquake repairs...and just the general cleaning required for paint to stick in that old, dirty wall. People expect magic from a can of latex 😂.
@@jooly_garxia yeah but its not like its super hard work, it can be tricky or if yer on a ladder and high up it can be dangerous and require some finess and stress yer back a bit but its not like back breaking tradesmen style work 😅 drywalling for example is way harder then painting lmao
@@karinagomez4583Because of his skill to paint so fast and efficiently. Go ahead and try it for yourself. That's when you see why sometimes it's best to just pay someone else to do the job.
When you roll paint it tends to fling very small particles all over. He is only covering the floor for the first 3 feet, the rest of it is going to be absolutely covered in speckles
You can change directions with your roller on first coat cause you’re just trying to soak the wall. Second coat however you do want to keep the same direction, and smooth out any hard lines
Depends, if it’s newly built apartments with fresh dry wall they just want that shit sprayed quick and don’t care about a mess to an extent. If it’s residential then yes quality over quantity which will take a bit more time
That’s after he spent a couple of hours emptying the room, putting down all the drop cloths, removing plate covers, getting everything else ready and cutting in all the edges! Lol
Chocada 😮! Sou eu quem pinta as paredes da casa a muitos anos para economizar e por ser um tipo de terapia pois considero uma arte. Nem em mil anos conseguiria fazer isso, o que para mim seria o máximo se eu conseguisse🫣
Lol I remember in high school I joined a "crew" that paid me 6 dollars a wall. The edge guy made 10 dollars a wall. I never complained. Did 3 houses a day. Edges were already done by the time I got there, setup was 10 minutes, banged 11 walls out in like an hour and clean up was like 20 minutes. Drove to the next one.
He already painted above the window, the part where the wall and floor (and ceiling!) meet and around the electrical socket in advance. Those are the parts that take the most time.
And two hours to do the edges !
Not if you use tape, it really shouldn’t take you two hours to do the edges lol 😂😂
@@Bluedhalias tape slows you down! Take your time and get good at cutting in and it's doesn't take that long. Not a bad idea to put some on your base boards to stop drips but I don't recommend taping up to the wall. Another reason is paint bleeds through easy
Hahaha true ..yes...and that's not including all the meticulous taping and masking...lol
How longer your preparation how better it will look ad the end
@@JonBorpa nhi
Painting the wall was never the hard part, moving all the stuff you’ve accumulated over the years to do it was I thought.
And cutting in the walls that part sucks
It’s definitely a job for a younger body.
And prep work...gathering paint supplies...putting dow drop cloth...painting around ceiling...windows and baseboards.
And preping it. Like they say 90% prep n q0% paint
Yeah, cleaning the walls takes more time than actually painting them. Also covering all the stuff you’ve moved to the center of the room can take some time too.
Let's just ignore the hours of prep work done beforehand 😂
Cine știe cunoaște😊
You better paint whole wall with brush then
Like who gives a fuck 😮
Yes edges n corners are torturous
Bravo ❤
I used to roll like that..when i first started painting...until i figured out paint splatter was flying everywhere !!!!!
Yeah cause he dry rolling he probably has missed areas
That’s just what I was thinking splatter everywhere
Do we do 2 layers of paint or just 1? Thanks
Same here
I'm mostly impressed by his INFINITE PAINT ROLLER.
Ayo for real now, or am I dum
What he did was he dunked the roller in the paint and didn’t ring it out on the bumpy part of the tray (I don’t know the terms😂) so it would be covered in a lot of paint. Then he spread it on the wall and then went back over it, so even if the roller was running out of paint there was still the extra he had on the wall. Then all ya do is apply a good amount of pressure and you get a nice even paint coat. Hope that cleared up some stuff😋
@@jellyface9989 if that's what you wanna call it lol
Me too
He on his splatoon fr
This guy makes it look too easy
It is easy...
Well it isn't fucking hard is it
They didn't show the 4 hours of prep and the 4 hours of shopping and the 4 hours of planning. And the 8 hours of arguing with the wife
Well actually he really should've went back and got more paint on the roller about half way through that wall. So id say he is just making his job harder than it has to be
It's obviously a primer coat & his $kills are paying the bill$ 🥂🍺
Everyone spontaneously inspired to paint a room realizes,3 hours in, that you are still cutting in the edges and just may have made an irrational decision. Lol
Lol! 🙋🏻♂️
Did that with my 2 story house exterior. Wtf was I thinking
lol can you imagine if you hire a guy to paint the entire interior of your house and 10 min later he's like 'ok, all done!'
deserves every penny paid. As long as the paint made it on the wall. IDGAF. says this goof off who had paint all over myself. More f*qed up than a soup sandwich my friend likes to say
10 minutes and you paid £3000 lol
@@Zazezoo came here to say this 😄
@@Zazezoodoesnt matter how long it takes, it matters if its done, and if its done well. if its just as good quality work in a fraction of the time, thats much better and worth more even than if it would take someone else 3 days to finish
That roller actually does soak up an incredibly good amount of paint enough for a full coverage.
Fr …Aunt fkn Karen could do that in 20 seconds with a high quality roller like that
从
Yes. It is strange.
Exactly!
@Rodrigo Hernández ola krnal
He already had the edges done. That’s like 90% of the time consuming work
For sure man cutting in is time consuming especially when u got dumb foreman’s that wanna put code base up before the let u in there to paint
I was going to say the same thing
Exactly! Cutting takes the most time. The rest of this we’ve always done faster 🤣
Dude it’s not gonna be exact it’s just a joke
Right. lol Still impressive to get the main part done that fast, but this is def the easiest, quickest part.
Also, I'd imagine two coats when on to stop cover any light spots, but I could be wrong.
Я тоже не отказалась от токова ролика один раз макнул и вся стена готова
Бабушкина сказка
Dude what kind of paint is that , covers up dark colours with only one coat
En tant que professionnel, je sais que ce qu'il fait ne sert à rien : s'il ne repeint pas trois couches supplémentaires, la couleur marron apparaîtra rapidement une fois que la première couche sera presque sèche. Ne pensez pas que les travaux seront faits si rapidement, car les murs sont souvent dans un état de délabrement et contiennent du froid, de la moisissure et des fissures qui doivent être réparées avec des matériaux spéciaux... L'essentiel est que ce que vous voyez sur CZcams n'est pas correcte. Salutations du Maroc 🇲🇦
Asi es !
Normalement la peinture se fait en croisé.
Painting time : 30 secs
Preparation time : half day
Exactly
Of course 。 look at the edges , they are all ready
It usually takes me 25 minutes average to trim out a whole room🤷♂️🔥
@@AiirGalaxy and how much do you take?
I was thinking the same thing and if you’re using a sprayer the prep time is even longer!
You gotta remember that he’s already done all the hard parts like the edges and around the fixtures/windows
He also has a really good paint. It's "covering" even on dark first layer is quite incredible.
How bout the fact he used a roll on one wall with out rewetting it with paint. And pretty much did 2 coats with one roll
Lol also his roller is way bigger than any average homeowner would need to invest in realistically
Spoilers. Lol
@@nutmeg418 nah alot of rollers will screw onto the handle of a brush or mop. Others you simply slide onto the handle.
قمه الترتيب والإبداع والنظافه
لحد الان ماشفت عامل يشتغل بهذه النظافه
الدهن على الالواح الخشبية سهلة
Dude just ruïned the whole painters industrie in seconds…
30 seconds in painting with that roller
3 hours in preparation, small cracks, tape work and 1 hour in wrapping up things.
BUT he said " In painting the wall" 🤪
1 hour doing the corners and around the plugs
Let’s not forget, with the lackluster coverage he’s getting on a dark base, he’s gonna need three coats.
@@pthalodezin warranty ends when he leave the driveway.
Yeah the rolling tends to be pretty quick but cutting in can take time so it isn’t 30 seconds. Prep is most of the work sometimes
“How to paint a wall in 30 seconds”
This guy: literally just paint it
It was actually 40 seconds, I’ve been counting.
@@rileywhalen6554 no one can be that precise its prolly not 30 second but neither 40
If you wanna make your colour good take your time with the paint.
@@oliaortega3688 tf do you mean nobody can be that precise? Its called counting
@@solventabuser77 Unless its with an actual stopwatch, or a digital timer, counting isn’t exactly the most accurate thing, you could count too slow, or too fast, only way to truly know if it was thirty seconds is a digital timer of some sort
Fantastic wall painting, will be keeping that. Have to paint soon!! Like your moves 😊🤩💚☘️☘️
За 15 секунд стена покрашена! Профи!!!❤
When you don't get paid by the hour:
You must have stronger arms than mine!
No way 1 roller full of paint lasted the entire wall, I call B.S
@@BrainScramblies maybe because what we make is barely enough
@@kevinpimento6602 it just looks like shit after
@@BrainScramblies There is no "wringing" it out all that it does is make the paint even around the roller so u don't drip everywhere, it slightly loses some paint but most of it stays on the tray for the next time you are "wringing" it out generally u get the roller soaked, do one section the width of the roller top to bottom, then get it soaked again, this man is going to have to do this another 4 times unless the contractor hes working for likes thirsty walls then all is good other than the lines left from uneven paint
The power of good quality paint. A single roller fill of it actually covered the entire wall without any dark spots and the need of refilling the roller.
Where I come from, the paint sold here (any brand) is so damn thin that you need to go for about 5 coats or more.
What are you talking about? No matter what paint, pros roll it out twice. Only morons think you can 1 coat a wall
@@patrickkelly8512 well, my bad. I did not phrase my comment correctly.
I tried to say that with a single coat he managed to basically cover the entire wall. Obviously a 2nd hand will finish the job.
I also didn't give the context that I live in a country in which paint quality is very bad and no matter the brand, it will never coat as good as the one in the video did.
@@patrickkelly8512 🤣🤣🤣🤣🤣
@@VochoTalacha he’s priming the wall if you are into rehabbing apartments this is the coat that goes on before you paint
Aura from Benjamin more paint... is one of the good ones that doesn't need 2 coats .. but 30 seconds to cut all those outlets base mounding windows and corners .. he probably took 30 minutes or more to do this wall, base on the wide of the cutting
Что за супер краска?
Маляр профессионал своего дела
Эмульсия
Супер валик😮
@@user-id8ft1be5vnão é o rolo.... Tinta branca não tem essa força de uma de mão cobrir um marrom assim ....que tinta é essa ?
Can you guys provide the make and model of the roller and the tray because those are not what you buy at a local Home store. Also how about doing ceilings (with high hats in them) I always miss spots. Thanks.
“I know a guy who can do it cheaper”
The guy who can do it cheaper…
That was stupid
Dude this reminds me of ppl at work that say things like “well I can get it cheaper at Walmart”. THEN JUST GO THERE.
As someone who ruined his white ceiling with splatter by putting a fresh coat of white on his walls, I agree this is a bad idea.
You get what you pay for
Love this comment😂
I showed this video to my uncle who's been painting for 40 years. He just shook his head and sighed.
Why
Quality>Quantity that's why
My dad died After this
@@step_bro4018 👌
Yeah because there is a right way to paint a wall and that’s not it lol
Everyone who pressed like for the video either you are a painting expert or that painting the wall temporarily fills a void in your apartment, which makes you feel good and makes you tab like. 🤓
That's a hardworking man right there.
The paint and brush are high quality the technique he used also made painting easier and effective.
U got that right, its amazing.
Really not 30
That's the point
Ads are getting smarter
@Amr shad topp
That's impressive - that roller holds an incredible amount of paint.
@@SullivanFamilyChaos Are you that confident with every uninformed assumption you give? He quite literally manually rolled. It's not mechanical you imbeciIe.
Like. LOL
@@SullivanFamilyChaos if you actually take a look at the handle instead of assume, you'd notice it is litterally a dark hollow tube
It's even more impressing how the paint doesn't drop all ovel the floor lmao
czcams.com/video/nCNJ1RAlPok/video.html .........
This was so fascinating to watch 🤩
He makes it look so easy. What he just did would have taken me all day.
Painting the big part is not that time consuming.
The little stuff, the prep is what takes all your time.
We call punting the edges cutting here in texas and that shit is the tedious part painting the wall is for the boss lmao
Yes! He already did the most time consuming part.
Yes let's see him do the cutting in the filling the making good. It's not that easy.
Right!!!!!
@@cyberbutter2686 everyone calls it cutting
Yee haw
How to paint a wall in 30 seconds... After you've painted the top, bottom, left and right, and around the electrical sockets, light switches and windows
Called cutting in, it’s the first step to enable to them paint wall in 30 sec
Ughh
When you were born after probably 9 months is that when your parents made you? You moron. Always looking for the smallest things to put down people. Get a grip
@@RiptidexRiltreks no he didn't
@@RiptidexRiltreks lol he totally did the same thing haha people be soooo weird when thinking they are better than other lol
Loaded roller twist at start was cool.
I need to try that. Good work.
👍 Wonderful wall painting work. Thank you very much for sharing.
The fact he knows how much pressure to put in order to keep enough paint in to finish the whole walls is an art.
Someone clearly never painted a damn thing 🤣 painting is easier than pissing 9/10 times
😂😂😂😂😂
@@slickrick364 Yeah, when you know what you’re doing. 🤨 Get a life, Mr. “I can do anything.”
@@laylax2672 you are born for a certain job, if you dunno what your doing, you probably shouldn’t be doing it ;)
@@slickrick364 Lol, incorrect. I didn’t know what I was doing when I first started drawing and now I’m good. Just because you have the ability to speak, doesn’t mean you should, Rick.
The hardest part about painting is honestly just moving furniture around imo. The painting itself is a really good mental detox
I make sure to breathe in as deep as possible so I can really detox.
Sure
Cutting in ain’t no bullshit
@@arthritisankle Cutting is the real work.
Lemme know when you're ready to mental detox the shit outta my crib homie!
Once all the cutting in is done, walls are fast and once all the tape is quickly put on the woodwork the painting fast too. I am a painter of quite a few years. Painting is a blast and the finished project looks great. There’s nothing like fresh clean paint and Voc free.
I took way too long for the boss's liking painting one of his slum apartments and he showed me how to do it. DO NOT REMOVE SWITCH or PLUG COVERS and CUTTING in doesn't need to be that ACCURATE. The next day I did a whole two bedroom apt without getting a brush wet! (And he was HAPPY!)
We all know the rolling is the easy and fun part that takes no time. It’s the trim you have to do before rolling that is so time consuming
Ummm no, this is not something ‘we all’ do. This man rocks
@@Sdetroye1 then you big noob
@@Sdetroye1 trims are really taxing on time time and extremely necessary for good paint jobs
It's all in the prep!
Not properly masked off
Me doing end of semester projects, the night before they’re due
🏆👩🏽🌾Sir, I needed this visual tutorial.🙌🙌✨️✨️
Ну и укрывистость у краски, супер
Валик охрененный
As pessoas falando do rolo kkkkkkk 😂😂😂 , tbm queria saber que tinta é essa ?
I am not amazed by his technique at all, I am amazed at the coverage ability of the paint!!
💯👍🤗
Yes same here.because after one to two time i need to dip roller into paint again😮
It will change when it dries.
Right!!
É verdade
Cool first layer of paint. Waiting for the second and third.
m.czcams.com/video/ggoJFaE71W8m/video.html.czcams.com/video/ggoJFaE71W8W/video.htmlelcome to Gboard clipboard, any text that you copy will be saved here.Welcome to Gboard clipboard, any text that you copy will be saved here.Welcome to Gboard clipboard, any text that you copy will be saved here.
@@newbd247 thanks for the info! Super useful
Why
Third?
Look at me I’m a dip shit mom
Красиво трудится! Здоровья и успехов желаю этому красивому человеку!
Next time put the drop sheet against the wall so you don't have to clean the floor 😂
That's all I could think of while watching - those bits of floor will have ended sprayed white.😮
He has paper down
No one's gonna talk about how satisfying the whole thing was??
I agree that wall was ready to paint still!!!
Even I fell so satisfy 😃
That's because you know nothing about painting.
It's satisfying until you've done it... literally every step up to this point is a total bitch 😒
@@zaymilo2761 yeah he already cut in on the edges and the outlet. But are you really going to say nothing of the fact that he painted an entire 25-30 foot wall without returning to the paint pan ONCE?! Come on.
Ikr
Painting with roller is easiest part, it took me 3 days just to clean out and prepare everything
Prep work is a slut
De acuerdo contigo. Sacar los muebles, cubrir otros, proteger el piso, colocar la cinta, pintar los extremos con brocha - subir, pintar, y bajar de la escalera, moverla de lugar, tantas veces como sea necesario - previamente comprar los insumos... claro que lo más fácil es pintar las paredes
Con todo eso, es muy satisfactorio el resultado 🤗
100% agree!!! Been there already
i have OCD and very controlling in my home. i have to renovate my whole living room (big room). i have uneven walls, so first before i can paint i have to even the walls ☹️ the materials are in my home since weeks, but my panik doesnt allow me to begin with the caos 😂 i know, stupid and first world problems. but i can‘t change that
@@Petra-R
Todo a su tiempo ⏱️🙂
kitni safai se kam ho rah ha mashallah Allah barkat de bhai k kam mai
I have been commercially painting homes for the past 10 years. Anyone who professionally paints knows the mess this makes lmao 🤣
Specks EVERYWHERE. Should have covered more of the floor. Baseboards and and window frame are gonna look crazy without a wipe.
You’re not as good as him obviously
@@cortezbarrett5826 You can literally see the paint splatter on the floor.
@@Chance57 don't mention the outlets and God forbid you get it on the ceiling..
@@joshryan9601 Aqui no Brasil tem desse rolo Josh? Obrigado
I've been painting for 70 years, since I was 3. This technique works well on new builds and other people's houses.... If it my own house. I use a 1 inch roller so it takes longer so I don't have to play with the kids.
😂
Good one mate
🤣🤣👍
70 plus years of paintings and you got kids at home ? I smell lie
@@jamesbond6351 Grandkids possibly
love to see these wall painting videos
Mega hultra economico com este rolo ,1 litro pinta uma mansão ! Mega parabéns para o rapaz excelente trabalho
Better to stick with either vertical or horizontal strokes. You'll probably notice a texture difference below the window.
I learned this in first grade coloring with crayons
I'll show you horizontal strokes
Not really, when it’s dry you’ll see nothin. Plus that’s only the first coat. It’ll need another one definitely. You can throw the first coat on like that providing your not leaving track marks in the paint and you’re laying it off properly.
@@marc7983 and this is probably just primer to start with also then there will probably be two coats of paint on top
@@beasthunter7480 the wall is already painted so needs no primer. He’s using a high opacity paint, a good trade roller and has a solid technique. One more coat will do it.
To be fair, he said, “paint a wall in 30 seconds” not paint a wall well in 30 seconds.
I'm stick of this stupid trend...
He never said how to paint a wall spot on and miss no dots in 30 seconds he just said how to paint a wall in 30 seconds
@@mc_squidy9037 why are you just repeating me in a less coherent manner?
es pura mamada no agen caso yo soy pintor pero cubrir una pared es mentira que una rodiaso cubre media pared es mamada
It was also 35 seconds.
This is extremely satisfying to watch
In France I do not know such an effective painter otherwise I hire him to repaint at home 😂😂
As an electrician, thank you for not just rolling over outlet boxes with some masking tape over the outlet. Destroys new receptacles faster than half the painters care to realize
How? As an electrician and a painter, a painter doesn't ever do that and an electrician wouldn't think it ruins an outlet
You might not want to watch my latest video..
@@stephenfresh1754 paint on terminal screws or inside the outlet is just plain bad for outlets and devices. What’s worse are the painters that paint over boxes and cover wires in paint. It’s just lazy and bad practice. Common sense honestly.
I uploaded a video showing how to properly paint around switch plates/boxes. I made it for you Vincent 👌
@@sizzlewok5453 respect man 👌 I’ll check it out
Mr. Beans approach still tops everything
Haha nice.
Oh my god😂i was about to comment it and found urs. We think the same way😏😌
Boom
And don't forget that friend who got painted😆
Looking for this comment 😀
I really impressed with this man idea of painting nice
Great job. Very smooth.
I’d be more impressed with a “prep a wall for paint in 30 seconds” video
This really does work, beautifully
That takes 60 minutes
It's all in the prep
Who tf trims that wide
@@kolbiehayes8092 a professional
Should be “how to FINISH painting a wall” prep is everything. He has it all taped drop clothed, and the edges are already done.
Exactly!!!!
Still, well done. For me when I do it the painting is the longest part.
Those edges are not done , he will have to cut that whole room in again
I mean he's not even finished, still only half done😅
True
O pintor está de parabéns!! ♥️👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽
Watching this is my happy place. Doing it myself = DOES NOT GO THIS FAST
The painting isn't the slow part, it's the preparation
What u said
Exactly. How long did it take him to paint the edges and tape up the outlet? Prep work probably took at least another 30 min no matter how good he is, if not more.
@@JOHN.hennry taping outlet? Why the fuck would you tape the outlet? You use a paintbrush to outline the outlet, Half a minute on each outlet and if you are a little careful around them when painting it, No need to tape it. Im a housepainter, and I only ever taped an outlet when I was an apprentice. I would much rather be concerned about the lack of paint being put on the walls.
@@Deehydrate you answered your own question. Way to try to sound smart buddy. You should go back to being an apprentice.
That's a different categorie.This is the pre prep catagory.
My Dad was a paint contractor. He’s gone now. I still love watching walls get painted after all these years. ♥️
Satisfying ain’t it
Awww im sorry for your loss🥲😖
@Stimpy ??
Double kill
Oh no ☹️ that's so sad😭
This is damn satisfying
This dude can paint! Woohoo!🎉
This is a great way to get tiny flecks of paint on literally everything in the room. That floor is ruined. Ceiling? Covered. Baseboards? Coated.
YES!!!
Exactly
Oh yea
You can literally see the paint droplets on the wood floor while he finished the last part
I was thinking the same thing. Why rush it??
If your a painter and your boss see you doing this, he will expect a 3 bed house painted & finished in 3 hours 😅
😂
Exactly. Gotta pace yourself! 😂
The most time consuming part of painting is prepping for paint.
@@jooly_garxia complete resurrection of the wall, yeah?! Drywall patching, picture mounts and fine cracks...earthquake repairs...and just the general cleaning required for paint to stick in that old, dirty wall. People expect magic from a can of latex 😂.
@@jooly_garxia yeah but its not like its super hard work, it can be tricky or if yer on a ladder and high up it can be dangerous and require some finess and stress yer back a bit but its not like back breaking tradesmen style work 😅 drywalling for example is way harder then painting lmao
You can hear the roller screaming for more paint 😂
Parabéns você é um grande pintor e muito inteligente❤❤❤❤❤❤❤❤
How else would you paint it?
Better than he did
Brush
Sprayer 😏
You don’t
Love how he already cut in. Rolling is not the time consuming portion lol
30 seconds worth of work..my bill is still $300 😂
@@karinagomez4583Because of his skill to paint so fast and efficiently.
Go ahead and try it for yourself. That's when you see why sometimes it's best to just pay someone else to do the job.
Amazing bro❤
بصراحه انت مبدع جدا❤😊
When you roll paint it tends to fling very small particles all over. He is only covering the floor for the first 3 feet, the rest of it is going to be absolutely covered in speckles
I'm guessing it'll be sweeped then mopped, which should clean up any specks
I don't know how far this applies but I've heard that higher quality paint (which this seems to be like wtf that coverage) spills way less.
Hand sanitizer takes it all off in seconds 😉
Ha u r right
look，it'sn18 inch roller. It cover 2X then the normal roller. Also it’s first cost
I'd be more impressed if he did the cutting and prepping in 30 minutes...
Same here. That takes forever
Prepping? These don't look like the prep type.
Me too! 😅😂🤣, it takes me 30 seconds to get the bucket open 🥴
عجب رنگیه یک دیوار کامل باهاش زد ایول👍👍👍👍👏👏👏
What kind and brand paint are you using to get such great fast coverage like that?
I’d be getting paint spilling all over the place at that speed
Exactly
Yeah they don't show that part.
You got to much paint on your roller
as a painter for more than 15 years I can accurately say that this man is painting
No foreal
Underrated comment LOL
czcams.com/users/shorts0YPe8bZQtG0?feature=share
10 years here and yes, I depict this man is painting. Poorly painting, but painting indeed lol
Haha Yes! And there's a difference between a painter and a good painter. (5yrs painting experience)
Wooooow you are profishinal painter 👍👍🥀🌹🏵️💮🌸
nice painting bro
I guarantee you that the way he’s rolling it’s going to overspray everywhere
I was thinking the same thing.
Just buy better product to work? :).
That baseboard is gonna get a lot of drips on it
I each thinking I could see nearly every layer and it didn't blend well at all. Guessing, hoping, that's a primer lol
Definitely gunna need another coat
Tip:never change directions with your roller
Yeah
I change and it became wall of prison
You can change directions with your roller on first coat cause you’re just trying to soak the wall. Second coat however you do want to keep the same direction, and smooth out any hard lines
@@brandontalbert8618 Great tips from all the Brandons.
@@AffectedArea we are here to serve 😂
Right then I’m sure that roller is very dry by the sound
Mashallha so nice wow beautiful❤❤❤
I like the unlimited flow of paint from the roller…..it will need a second coat for that brown to cover up
Painting is quality over quantity
Most apartment painting companies would beg to differ
Depends, if it’s newly built apartments with fresh dry wall they just want that shit sprayed quick and don’t care about a mess to an extent. If it’s residential then yes quality over quantity which will take a bit more time
Yep. The finish on that wall will have way too much texture because of the nap on the roller
How does that comment apply to this video? Seems to be quantity and quality.
That’s after he spent a couple of hours emptying the room, putting down all the drop cloths, removing plate covers, getting everything else ready and cutting in all the edges! Lol
Ii8
Ain't that the truth!
I know right!!! Plus 30 seconds had long gone 😂😂
Somebody asked to say something it’s not perfect for everybody
Exactly right, the preparation is the hardest part
A beast . I know that core is tight❤
Chocada 😮! Sou eu quem pinta as paredes da casa a muitos anos para economizar e por ser um tipo de terapia pois considero uma arte. Nem em mil anos conseguiria fazer isso, o que para mim seria o máximo se eu conseguisse🫣
Other people thinking: Wow that was really smooth!
Me thinking: How didn't he run out of paint???
Same 🧐
Same😄
Sameee
Wawwu you think differently you are so special you should be in special kids school
@Amr shad ?
Lol I remember in high school I joined a "crew" that paid me 6 dollars a wall. The edge guy made 10 dollars a wall. I never complained. Did 3 houses a day. Edges were already done by the time I got there, setup was 10 minutes, banged 11 walls out in like an hour and clean up was like 20 minutes. Drove to the next one.
Infinite money glitch
@Aurora.
@@darksamaneous7798 lmao
I can’t do math can someone tell me what this means
Does this mean you got almost 200$ every day and if so does that mean you got almost 1000$ a week
how does that roller hold 2 gallons of paint
Algorithm: This guy will watch any fuckin thing
He already painted above the window, the part where the wall and floor (and ceiling!) meet and around the electrical socket in advance. Those are the parts that take the most time.