Video není dostupné.
Omlouváme se.
Gas to Electric Conversion of a 1989 8hp Yamaha 2 stroke engine
Vložit
- čas přidán 17. 08. 2024
- NOTE: At 6:36, I meant to say 2 miles not 8 miles
Key points in the video
0:00 Start of the video
0:33 Why I did the project
1:52 Project breakdown (acquiring the parts that I need)
2:52 Project breakdown (getting ready to convert the motor)
3:27 Starting the Conversion Process
5:10 Testing Phase + Final Touches
6:28 Final thoughts + Price Breakdown
Excellent job Carlitos. Keep being curious and never be afraid to fail. I think you are in the right direction with this project.
Excellent work..
Looks pretty good. I built one exactly like this few months ago. 3d printed coupler will fail because of it is not aligned perfectly the harmonics will creat stress cracks.
Some tips:
One way to minimize is to mount motor with large rubber bushings or isolated pad.
You can also have that plastic coupler 3d orinted into metal for about 150$ online.
Also need to look at cooling that motor as heat builds up, efficiency will drop. I added a 48v fan on thermal switch. Comes on only when needed.
Install an inline amp meter about 10$ on jungle site to montior amp usage.
Looks good, the torque multiplication with gearbox should help. Remove the pump impellor it creates resistance
👍👍👍 nice job
Nice job young man. I see an engineer in the future. Glad my polarity video helped your project!
Nice