How to fix Hoverboard charging problems FIXED WORKS, 4K UHD
Vložit
- čas přidán 1. 01. 2018
- Thank you for watching! Please like and share if you enjoy.
If you like this video, please visit our channel to view our other videos and subscribe for updates. - Jak na to + styl
Just buy-it and I figured was something wrong with charging... so I look on you tube and I found your video. My boy is happy now for his birthday.Thanks man. The battery was different but I sorted how to fix-it. You’re the man.
Can you please say me how u short circuit ed it, bcoz mine is different too. Its says -B and -P. I'm confused 😕
Best video on battery advice on the hole of CZcams, I have not be able to charge my battery and have been up the fucking wall because I paid good money for these batteries, you have just fixed my problem in 5 minutes, thankyou very much you cleaver man , jfk over and out
Very good video!!!
You explain in details a simple trouble.
Many thanks!
It work after even 2 years of not using it thanks a lot buddy !
You re amazing!
I wonder what label name on pad at the opposite side ? B- or B+ or …?
Great explain....
Thank you very much
Cheers from Denmark 🇩🇰
My battery is different, but work's.
Thank you!😱
I don't know if i was searching correctly but after 3 long months I finally found the fix for the same issue here on your video. Thank you very much.
Same
Thank you so much for helping me
Had exactly the same problem. Same battery. Fixed it as shown in your video. Thank you.
Could have explained that you were connecting the negative to the spot marked B- on the board, for those that have a different one, but thanks a million, saved my step daughters hover board! Or at least saved me $60+ buying another battery.
I did this and my battery is now gone forever
@@jacobr5465 Had a different problem, or you did it backwards.
@@jacobr5465 sounds like you shorted the wrong pins
@@realracerx my battery is different so I don't know which one to jump
DUDE!!!! thank you!!!! mine looked little different but i short circuited the black wire with other pads and now its charging!!! cheers brother
Mine is different too and I tried charging in several pads but didnt keep it very long in each pad. Is there any issue if I kept that in each pad for too long? My battery wasnt charged for many months and might have lost the voltage completely. Any tip will be helpful.
نفس المشكلة لاكنني لم اعرف الحل هل بإمكاك الشرح لي ؟؟
Would have never thought of it.....when I excited the battery........STARTED CHARGING...THANK YOU SIR!!!!
لم اعرف الحل هل بإمكانك الشرح لي
Thanks so much bro u helped me a lot i lost my charger and i wassnt able to use my hoverboard then when i got my charge so i look up yt and found u
Great video. Good information! Thank you!
Thankss!!My battery is different but you help me a looot!!!
It worked for me! Faulty BMS! Thank you
I wonder what label name on pad at the opposite side ? B- or B+ or …?
Save Money and Don't Keep Buying Battery. This was a Excellent Video... Thank You. Best Hoverboard Charging Problem Video on CZcams!!!!!
I wonder what label name on pad at the opposite side ? B- or B+ or …?
can't believe it worked!! thanks master
Worked 100%!!! Thank you!
I wonder what label name at the opposite side ? B- or B+ or …?
Thanks man, this helped me, it's working
Thank you this really worked my son is really happy now
I wonder what label name on pad at the opposite side ? B- or B+ or …?
You're genius, I have 10 units new never been used but all of them have this problem, your trick worked in all of them thanks man
Great, you are a Genius!! Many thx man!!
Works also for me . Thanks from Italy
Thank you, your video helped me a lot man.👌👌👌
I wonder what label name at the opposite side ? B- or B+ or …?
Thank you, this worked good so my son & I are pleased. Thanks again 👍🏻
i guess Im kinda off topic but do anybody know of a good website to stream new movies online ?
Thanks, I signed up and it seems to work :) I appreciate it!
I wonder what label name at the opposite side ? B- or B+ or …?
Deu certo aqui no Brasil, Thanks!!!!!!
Thanks for the big help .... nice video
Good this works, thanks for the information, I changed two of the batteries because they had corroded but still wouldn't charge all problems solved now and link removed.
Thank you. Helps a lot.
Thank you my friend.
My battery is different inside and on voltage. My cable sparked some few times but after many tries it worked.
Hi F R...am sure my battery is jst like yours how did you proceed ?
Me too, have same case w/ u n after tries 3 time it worked again
Did you have the battery plugged into the hover board whilst carrying out the procedure?
I wonder what label name at the opposite side ? B- or B+ or …?
Thank you so much.......it worked..!!!👍🏻
It works really well!!! Thanks
thank you i fix my daughter hover 1 👍👍👍
Can i know the indicated power does Singapore sell as i might want learn your style fix my problem
Many thanks, worked brilliantly!!!
I wonder what label name at the opposite side ? B- or B+ or …?
100% works. Thank you buddy, i love you!!!
thanks, subscribe me and share ;)
deiviskns Of course, peace and love again.😚
Excellent hack, worked for me, thanks!
Thanks, i did like in the video and it started charging.
No problems more videos in 2 weeks
you are a life saver. I think I ended up shorting several different spots on my board before it worked, but in the end... IT worked!!! Thank you So much!! Dunno if you still make videos or not, but you got a subscribe from me for saving me $100. Thanks again!
I wonder what label name on pad at the opposite side ? B- or B+ or …?
Just wanted to say thanks it worked
Muito bom ,sou brasileiro e através de sua colaboração resolvi o problema do brinquedo da minha filha ,ela está muito feliz obrigado amigo.
Showww!!iam brazil.
Thanks
Thank you very much brother
Good video, thanks for the trick
Thank you for you help 👍
very usefull, thank you (y)
Damn this really worked. Started charging again. Thanks.
What model is urs Samsung??
Never mind. Son used it for 1 week. Then caught on fire. SERIOUS. Do not charge in house. Repeat. Do not charge in your house.
Ohh Sugar! Has anyone else had this happen ?
I wonder what label name on pad at the opposite side ? B- or B+ or …?
my battery is diferent but i i looked for the place where are almost 10 volts (two big black wires) and... IT WORKS!!!! thanks a lot
You ran current from black wire to black wire
@@jessicasanders9610 LOOOOOL
Thank you very much
THIS WORKS!! For anybody that does not understand tell me and I will help you!
Please help mee
Mines the same as on the video but when i do as said on the video it still doesn’t charge
I luv dis guy it works man thank u I don't know how to thank u man
thanks ;)
@@deivisknsYou only reply to positive feedback but ignore the questions, not kind.
Nice one !!! Thankyou :)
Thank bro my battery also working thanks alot
I know it's been 4 years but I recently just got this issue with my hoverboard and after watching several videos your video was the most helpful and simple way to fix👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽 thank you after jumping it its now charging 😁✌🏽👍🏽
👀👀👀Brazil!!thanks
thanks dude..it was grate
The best, thanks!!!!!!
What should i do my board i switch on charge e board during charge is flashing amber and power is indicate red light but within 3hr power indicate light turn green but board still amber flash for about 2~3hrs... auto shut down. After i plug out switch 🔛 everything connect well on green light but when I wanna ride another side flash red with peep sounds i try it few times but charge within 3hrs done yet after 1st time charge i can't even used already
Nice one and thanks.. Had a different setup but just shorted out the 2 negatives and off she went! 👌👍
How you know which ones are the two negatives
Thankyou for taking the time, after 3 months of no use my 'zinc smart gt' only has lights on the board if i have charger plugged in, it will recalibrate but still no movement in board, i take ''green light' charger out and everything dead again, no lights no beeps. So hopefully i can kick start the battery from inside or verify that its dead forever. I have multimeter but have never used one. Now i will open board up & try. My boy would be so happy. ....
EDIT.....My battery pack is different, is he putting one wire on negative and other end to a positive? or neg to neg? wire sparks and heats up but no change, BATTERY reading at 12, charger still green light. Charger isn't faulty.
Thanks mate, fixed mine with the same fault.
كيف لم افهم شرحه
I have Same problem, thanx .
Thank u so much 😄👍
My brand new hoverboard run time is around 25 minutes then it cut off power of board. At full charge it was around 41.5 V and after 25 minutes the battery voltage was only 37.8 V for cut off. Why is the voltage still so high and already there was a cut off the power?
At wat voltage should the board switch off? Any suggestions?
My battery wouldn't charge because it was just a litter undervoltage. Battery light red and only beeping. But here is a tip: when you remove the gyro cable (next to the led cable) on one side the battery charges. When it gets to 36v then the gyro cable can be attached again. That only works if no cell has failed, but you can try it (just be around the first charges, in case anything goes wrong).
Your the man brother got mine charging thank you for the video 🙂
Thanks 😍
Nu, berods padėjo, Ačiū. (looks like working, Thanks)
Prasom
Muy buen bien lo acabo de hacer igual y ahora funciona
Good job broo thx you somuch
How big is one cell in an ampere, and can I double the number equal to 10 ampere?
What cable can I use to short it? Would a cut phone cable work?
Thank you
thanks ur the best
thank you bro i love you
hello thank you very much for uploading information i need a summary of your solution in spanish por favor ya que no hablo inglés.
Necesitaa ayuda?
Can this work with a razor and a segway minilite?
Thanks, very much, work perfectly, you save me
gta mods qc1qq
Thank you so much for saving my battery!
I wonder what label name at the opposite side ? B- or B+ or …?
your a genius!!
How's that?
Hi, My battery is showing 41.2v but hoverboard still won't work. Does that mean the BMS is at fault? Is there a way to fix the bms or do I have to buy a battery? thanks
My battery is different. But when i try this method i just big sparks. Its a different layout. Have you got social media i can contact you and forward a picture
Merci beaucoup
Thanks
Very well..... But I'm little bit confused ... After that if battery consumed and low warning show than we have to do that same work again or we have to do it once??? Please tell me
Yeh reply man is this a one time fix.
Just as I was getting annoyed that this was not working for me, and just kept seeing sparks which was a bit concerning. After 4th attempt the red light on my charger appeared solid after flashing for around 10 seconds. Once the charger light turned green, I checked with a multimeter and battery only outputs 25volts, should be 36-40?? Hoverboard still not powering up. 😕
@deiviskn When I make connection it shows red, but when I let go it goes green again, can i fix the link ?
Thangssssss Good Work
Merci 👍👍👍
thanks broo
Bro i don’t have the voltmeter? Is it that i have tk connect the wire with voltmeter and then with the black wire or we just have to get a wire and connect it with the black wire? Plz reply i’m rly confused
thank you so much.my charger is warm and the light is red. waiting for full charge.
I wonder what label name on pad at the opposite side ? B- or B+ or …?
Grazie, funziona!!!
With charger plugged in mine lights up when I press power button without the battery. My battery is slightly different from yours. I get 18 amps from charger board.
Tnks .
Acabei de fazer seu procedimento e deu tudo certo muito obrigado
God bless you bro
What if the 36v battery at 1.34v can that be revived