Chain clean and lube, DIY

Hi, This video show how to clean chain, front and rear sprocket areas and lube them.
Tools used in this video:
1. 8mm socket.
2. 5mm allen key.
3. Grand Pitstop motojack.
4. chain cleaner spray from Rolon, lube from Grand pitstop and a brush.
To open the front sprocket inner cover. take a sharp edged tool a screw driver or any thin blade like thing and press the lock of the cable tie towards you and pull the cable out. its easy and doesnt damage the cable tie. i have done it multiple times. no issue. Just be extra careful while tightening the allen bolts of the inner cover. cauz the inner cover material is thin and tends to bend if more force is applied. Thank you.

[@nandyad]

Very good

[@tejasarun352]

great vid

[@djalmajoaquimdasilva450]

Verry good

[@justmalluhuman]

brother really amazing and satisfying job have done, i would suggest you to keep an on your camera angle, and sound it would be better if high definition audio comes along with it will make it an international standard video, great job so far brother. ❤❤

[@2wheeledcompanion]

thanks brother. at present nor do i have any video making skills or budget & equipment to make better videos. i know that my videos are not appealing, will try to improve.

[@gurucharanchundi]

Thank you so much! Just one doubt, what is the black zip tie looking thing that is holding the cable in place? How did you remove it and put it back? Just asking so that I don’t accidentally do something to damage it. Thank you for recording and uploading 😃

[@2wheeledcompanion]

with any sharp edged tool, u can remove the zip tie lock. try on some other ziptie if u have. its easy and it doesnt damage the ziptie also. i have already done this multiple times.
just place the screwdriver in between the lock and cable then pull the lock towards urself simultaneously pull the cable down.

[@gurucharanchundi]

@@2wheeledcompanion Thank you man!

[@pascal8278]

what tool do you use that replaces the center stand that is not standard on this bike and that you use to lift the rear wheel so that you can clean and grease the chain?

[@2wheeledcompanion]

it called moto jack from grandpitstop

[@gurucharanchundi]

Hi, is the Agaro tool kit of good quality? I am also looking at Stanley, Taparia, Bosch GSB 26, Bosch 46 bit screwdriver sets

[@2wheeledcompanion]

if u have the budget, then go for Bigger brands. i bought Agaro cauz i got it for 1300rs and its of quality.

[@gurucharanchundi]

@@2wheeledcompanion Thank you

[@sanjankashyap4113]

Bro which chain lube and cleaner have u used, and is it fine for x ring chain of speed400?

[@2wheeledcompanion]

i used Rolon & Grand pit stop, compatible with x ring

[@elvisbastian]

Any tips to keep exhaust pipes clean and shiny?

[@2wheeledcompanion]

i use a polish paste

[@elvisbastian]

Which one

[@2wheeledcompanion]

@@elvisbastian Autosol 1734 Stainless Steel Polish, 75 ml amzn.in/d/0fmCeAuE