Cheap horsepower for your 7.3L Godzilla Ford!! And Mountain Biking!
Vložit
- čas přidán 2. 05. 2024
- This was a fun one! Mountain Bike riding in the morning then we head over to run my 2020 Ford F-350 on the dyno to see what kind of power the 7.3 Godzilla Gas engine puts down. Then, back to The Dirthead Shed for mods. I replace the stock resonator and muffler with parts from Flowmaster , Thrush, and Dynomax. Then it's back to the dyno shop to see if we made power, or lost power. Watch and see the results!
Chad’s Instagram
just_a_guy_...
Dynomax super turbo
www.dynomax.com/mufflers/supe...
Thrush glass pack
www.thrushexhaust.com/muffler...
Flowmaster y pipe
www.holley.com/products/exhau...
Keywords
Dirt head shed
Dirthead Dave
Ford superduty
Super duty
F150
F250
F350
Dynojet
Dynamometer
More power
Custom exhaust
Cat-back
Pushrod gas engine
Big block
Alumiduty
Dually
Tow rig
1 ton ford
+49 ft lbs for an afternoon of work and some random exhaust pieces kicking around is no joke, you'll be able to feel that while driving it around!
Right! Thats the best kind of mod
That's 100% butt dyno approved!
No you won't.
@@ShainAndrews you're a dog, what do you know?
Every weekend morning, I look for a Dave video to watch, to inspire me to get out into the garage.
Get to the garage. Weekend is almost over!
I love this channel is crossing over to dirtbikes and mountain biking. Exercise is important and everything with wheels is fun!
I agree with you
Resonators are the cheat code for a drone-free exhaust. My car has four resonators and no mufflers. She screams at WOT but I barely hear it on the highway.
They definitely keep some of the bad frequencies down
I'm 51 and (for me) the diet has been key. Staying active (exercise) also helps but the diet as you age can be a larger factor. But with that said everyone is different. You'll figure it out. Good stuff Dave, have a good weekend. Like button enabled and video watched in its entirety for the 100K milestone.
Thanks so much
I have to agree with the eating good, I'm 31 and trying to eat as clean as possible, in the day to day its small increments but noticeable after a while.
65. When you stop eating all the junk. Junk like all those delicious baked goods your wife makes and ice cream. That makes a huge difference.
Gave up the junk started walking. A little at a time. Two miles 3 or 4 times a week. Dropped 30 lbs in 4 months. No other exercise. Kept eating what I was eating already. Gave up the cakes,cookies,pies and ice cream.
So good on you for taking interest in your health.
I second or third the diet part, makes all the difference. Had a heart attack and wake up call last year, now it’s eating light, MT biking and indoor climbing gym. Haven’t been this trim since high school 30 years ago.
You can’t outrun a bad diet!,
It just goes to show, that junk will do the job when talent is added to the equation. Good job. Thanks for the video.
Thanks for watching
You're a Man after My own heart Dave...My neighbors love My constant exhaust modifications on every new vehicle I own
I’m sure they do
Just remember it takes time, keep at it and it will come. Get a goal and a plan to achieve that goal. And diet goes hand in hand with the exercise. If diet is crap you will look like crap. I came back after spending two months in a hospital bed, losing over 50lbs of muscle and have to learn how to walk again. But with heart and dedication I was able to compete in my very first bodybuilding show a year-to-date after getting shot. It goes the same with someone just trying to get back into shape. Keep at it buddy.
That’s is great! Sounds like all moves in the right direction
Those trails are awesome! Beautiful in the spring time
Very nice! Love the perfect amount of sound too!
Love to see you mixing it up, David! Keep it up, man.
That scenery is incredible. Trail looks fun too. Trails don't always need to be hard to be fun!
Bikes and HP. Sounds like a good day to me! 👍🏻
Not a bad day at all
That torque gain was totally not expected....congrats sir
I always learn a new trick i hadnt thought of watching your videos. Using the wrench to bell the exhaust is genius. I never have good luck with those tailpipe expander tools anyway.
Channel lock pliers work great for it
Dude sounds good 👍🏻. Keep up on the bike you will be back at it in no time! Rad video as always Dave 👊🏻👊🏻
Thanks so much
Dude!! Great video!!! Exhaust is always the funnest part of hot rodding!!! Nice job!!!✌️
I agree. Pretty instant gratification
Free upgrades that actually give you more horsepower heck yeah! That's rad!
Win win
Keep up the great work Dave! always enjoy watching all your adventures and projects! dont ignore your health and always stay active! oh and eat healthy to lol im 39 and have had 3 back surgerys from a work accident. i do my best to eat healthy and stay active so i can do all the things i enjoy! your a Rad dude! and it was awesome to meet you last year at EJS‼️🤘
Back injury doesn’t sound like a good time at all. Keep doing what you’re doing !
Thanks for another great vid! Truck sounds alot better without that restrictive exhaust and you got gains. Woohoo!!!!
Win win
That video stabilization made that downhill exhilarating!!! Keep the hits rolling!
GoPro is winning me back a little at a time
Great stuff Dave! 100k all the way.
We’re reeling it in
"I'm already out of breath and I just left the parking lot" 🤣🤣 Same my friend. Same! You could prob buy a drone to follow you on the trails to get vids of you riding!
That would be cool footage
Watching this video this morning and Dave says he wants to get in better shape.
I feel ya Dave, I do too. As I sit on the couch watching you exercise with a donut and cup of coffee ….
I’m going to get donuts this morning too
Nice sounding exhaust Dave! I was winded just watching you ride.....guess I should get my Haro mountain bike out and ride some too. You got good taste in cars, trucks, and bikes. Keep up the rad videos.
Thanks! Get the bike out
Dave, you are the man. I was on fence to do an exhaust on my Godzilla 250. After this it’s definitely happening. Keep up good work. Cheers brotha
Right on. Hope you dig it
Dang that’s a sweet gain for torque! I love the sound of my truck, and I don’t want it to be much louder than stock, but y’all are tempting me!
It didn’t get very loud..
That was fun to watch thanks for posting this up
Glad you liked it
That Flowmaster 250300Y is about the best y-pipe for the money. I used a 300400Y from the header collectors on my old pickup and used a 4" diesel exhaust system to finish off my small block k2500 truck.
Cool
Great work, man.
Sounds good from here
I’m just glad it’s not super loud
Awesome video Dave!!
Glad you liked it
Man, I needed this video today. Definitely need to get back on the bike too.
It’s good , relatively inexpensive fun
Great episode Dave!
Thanks. Glad you liked it
It was rad to see you mountain biking. I don't go 4 wheeling but I do mountain bike. 😁
Right on…. I just ordered up a new bike, excited to give it a rip. In a week
Really sounds good and I like how clean the pickup is
It’s pretty clean. Time to get under there and fluid film it again
A lot of good gains can be made with exhaust for pretty chap. Nicely done! I've learned how important headers and exhaust setup are a lot on Engine Masters.
That’s a great show
Great video Dave ,
Thank you
I gotta say Dave. You seem much more confident on your mountain bike than your DRZ. I know the DRZ is porky. But you really can it the corners and the brakes just as hard on that as your mountain bike. I love your channel. Keep up the great content. You are one hell of a fabricator. Thank you for being you and sharing it!
My goal is to have fun and try not to get hurt.. I’ll never be the fastest
Awesome video Dave
Thanks Mark
Stoked to see the mountain biking! Great "action" video, but ride it dont slide it! 🤣
Pro tip
Not gonna lie the intro gets me fucking hyped for the video every time. Beware of darkness ftw
Heck yeah!
Sweet video! Thanks Dave
Thanks for watching
Nice Torque gain. Should be able to feel that. ;-)
Excited to put some miles on it
Nice gain in HP and Torque on cat back mod. Not only that, you just used extra parts laying around in your shop👍. The gain is enough not to notice any decrease of gas mileage when you are using your A/C. Excellent overall outcome👍. Any form of exercise is good for anybody. Good for you. I don't ride bikes anymore (71 yrs old) because of health issue but when I was younger, I used to ride 150 miles a week on a road bike. Here in Las Vegas, there's no such thing as flat road so it's a work out. Anyway, all the best wishes on your exercise program and keep the vlog coming.
Oh man. Those had to be good days on the bike
"Hey, Superduty, you wanna make some more power for me?" "I can't do that Dave" 😂😂
Hahah
*heavy breathing* HAHA Loved it.
Love the content Dave!
Thank you
I play disc golf at Sekani all the time, bad ass bike trails out there!
Right on. There were a bunch of people out yesterday
Man, it's so beautiful where you live!😊
Really enjoyed your latest! Thanks for takin us along!
Thanks for watching!
That’s cool, it’s exhaust day. I literally just got done putting a flowmaster exhaust on my truck then I see your video today. 😂😂
Right on. Turn out nice?
@@thedirtheadshed it sounds good but I think I might do like yours and add a glass pack in front to mellow out the drone. Does yours drone on the highway?
No. It’s quiet
Just discovered your CZcams channel from the new roadkill garage episode! Been missing dirt everyday. Glad you mentioned your channel!
Right on. Welcome!
Thank you, glad you have a channel. I watch a whole lot of CZcams! I have been binge watching your episodes all day.👍😁
Much appreciated. Tell your buddies to subscribe too. I need to make this into a real gig
Will do!
Man, you are all over the place with this video and it’s great! I recently ditched the stock muffler on my f150 for a magnaflow and it sounds great. Not terribly loud but more rumble. I left the stock resonator on because I’ve made the mistake of removing them in the past and ended up with a horrible droning on the highway. Now after looking inside of the one on your truck, i wonder if i should lose the stock resonator and go with something less restrictive. I guess theres only one way to find out! I’m jealous of the great mountain bike trails you have too. I’m just trying to get out and hike more since we don’t have many bike trails.
Good work dave
Thanks!
Buddy ran 3 glasspacks on his truck. Sounded deep but pretty quiet all free flow.
I have done that before. Sounds good
My daily is a 03 f1504x4 with a 01 lighting motor. It’s a great truck. Super clean and holds a ton of mtb🎉 come hammer Colorado Dave. 😅 nice trail.
Right on. I need to get to Colorado more often
Nice work! I need one of those metal glue guns. :)
It's probably overkill but whenever combining pipes, I'll figure out the area of the two, then make the outlet as big or slightly bigger.
Two 2.5 is 9.1 square inches. Single 3 is 7 sq inches, single 3.5 is 9.6 sq inches.
Good gains!! Now to get an 87 octane tune and intake. Get rid of the speed limiter, manual lock it in 7th during the next dyno tune, you’ll be surprised how much more jam it will have!!
One thing at a time. I need to get my Nissan on the road
I love mountain biking!
Me too
Cool your mtbing too.
I’m into both.
Mountain biking, and playing with old trucks.
My observation is most folks are into one of the other. Not both so much.
That is true. It’s not a real big overlap
Nice ! Free hp and torque!
It worked out well!
I love that Hard-body
It’s a good one!
Good to know. I've got a 22 F250 7.3 with 4:30 gears and the 10 speed that I absolutely love. I'm ready to start modifying it and this video helped push me to do it.
From what I've seen out of the 7.3s with a 10 speed stock should be upper 340s to lower 360s on the horsepower.
I think that is crank hp. Not to the wheels.. but I could be wrong. Have not investigated mucb
Having the DRW likely saps some power from what others may post up with their respective dyno sheets. The transmission may be different as well. All 7.3's might have the same, but being a 350 DRW I wonder if they gave it the same internals as the 6.7 trans.
@@ALMX5DP they offer a detuned version in some models like the motorhomes. I'm not sure what else. All the others should have 430hp/475ft lbs at the crank.
@@jerryfoley8857 sure, I was just suggesting that being a 3500 DRW might show less power and torque making it to the rear wheels than others who post dynos up of a SRW 2500.
@@ALMX5DP This is probably right, especially on an inertial dyno. Another set of drive axle tires take more power to get up to speed.
Cool biking! You ride beacon much? My favorite run at Beacon is up on Carousel like you did then cut over to the top of the downhill course on upchuck and go down Stalingrab and back to the lot. Super fun. Love going over to Esmeralda and back too when I’m not feeling lazy 😂 Hope to see you on the trails some time, I’ll give you a beer!🤘🏻
Nice. The ride you mention is what I did yesterday
Love your vids man thanx
I would totally ride Slick Rock Bike trail with you in Moab, during EJS next year if your there again. Good times... I used to work at Spoke and Sport on Division years ago. I don't even know if it's there anymore. Haven't lived in Spokane in years.
I’ll bring the bike next time
Nice dyno pulls
Pretty cool getting to test the mods
If you ever think about selling spaghetti, I would be seriously interested. Great vid as always.
I’m thinking about selling Louis if you know anyone interested
Love this video
Glad you enjoyed!
Great video
Thank you
Dude, I use ride my bike everywhere when I was a kid. As an adult, trying to keep up with my kid now is like nothing before. My legs are always dead.
I know the feeling
Those MTB trails look amazing. I live in the northeast so all my riding is very chunky haha
I’m sure you have some rad trails
Should totally do a Tremor front bumper valance. Bolts right on and only costs a few bucks and makes the truck look so much better
Been on my list a while now
You should tune it. You’d love it!!! I’ve got a 21 E350 super duty cutaway with a KUV body on mine. Bought an Sct tuner and went to 5 Star Tuning for 2 different tunes. Josh Newman is the man!!! My truck runs soooo much better than factory!!! Got a 87 Daily tow and a 93 daily tow - big difference between the two. Love both but I get better mileage with the 87. Can return to factory if it needs to go back to the dealership. My horse power, torque and fuel mileage all increased drastically not to mention my speed limiter is gone😊. Food for thought.
I keep hearing the 5 star is where it’s at
Florence, SC
I second 5Star. I run an 87 performance tune daily on my Tremor since I rarely tow. Removed the accelerator delay, shifts through all 10 gears, and should’ve added about 36hp. Had the tune about 18000 miles no issues.
Mountain bikes are the best!
So good. More of that really soon
And now I have to do this to my tacoma..but I am a better grinder than welder...workin' on it.
You’ll figure it out
Decent gains from shop clutter.
That's why I don't get rid of stuff either. Cuz ya neva kno...
Tripping over horsepower
Just remember circle is a shape..I call myself a flab-o-lanch..but really 54 and down 15+ pounds really does help you breathe better. Who would have thought..Love the 7.3.
Yep. If I can lose 15 I’ll be stoked
RAD!!! time to get a Carli Suspension system for it.
That would be nice
I currently have a 2016 F150 5.0 Supercab 8’ bed and the heavy duty payload package. It’s been a great truck but I often find myself towing more than 10k pounds these days and a newer F350 SRW with the 7.3 Godzilla is my ideal choice. Diesel would be fun but too expensive to maintain in my opinion if it’s not making you money.
I agree. The diesel definitely has its place. But the cost is so high
..... the STEVES and David are all EFI crazy Engine Masters .. that 7.3 would make a great ENGINE MASTERS upgrade and a Roadkill Garage install .. you just have to reside in the fact Steve might have it on the farm for a couple of years .. lol
Haha. True. I think I’ll keep it at my shop
@@thedirtheadshed nice job on the 4 link with David ..those ready made brackets are sweet
That loop the loop at the end of the graph! Ha
i always tell people the best place to store a cutoff wheel is on the floor,because that,s where they end up, cool day ,thank you
That’s no lie
I really want to uncork my 5.0 a bit but I think F-150s have pretty straight through mufflers already. That and I don’t want too much sound when towing, especially for a sustained mountain grade. Kinda like the silent exhaust for that situation (or decel on the way down).
I totally get that
That Y pipe is the MVP here. You could just replace that first resonator and get great results, and it doesn't sound like a fart machine.
It’s easy to see. After the fact
@@thedirtheadshed Hind sight is 20/20
Anytime you want to check out Riverside State Park on the MTB, let me know - I've ridden there for years! 😉
I need to check it out
Have you seen the flexible extensions to put on the weld tip? Makes welding on the top of exhaust pipe more simple.
When I had an exhaust shop I had a profax flex head gun. It was kind of gimmicky. Didn’t use it very often
Love your videos Dave! How can a guy purchase one of those dirthead t-shirts?
Pretty soon. Working on a site and inventory now
You missed the obligatory straight pipe rev after you cut the resonator off. I like to start and rev it after welding each piece. . Y pipe.. mufflers.. and tailpipe.
This thing was so sketchy on the lift I just wanted to get it done
Does anybody else close their eyes when Dave strikes an arc?
I do
Those dynomax muffflers are so underrated, everyone wants a magaflow or flow master it seams like. I had an exhaust shop and would always recommend those. Did you get any droning with the new set up? Thanks for the great video.
They are good. They just don’t have a real pronounced sound like a flowmaster. I personally really like the sound of the really cheap thrush turbo mufflers
Get back in shape. It makes riding your dirtbike better too. Especially getting your core strong. I was wondering how long it would take before you started playing with the dually..lol.
I’m not gonna do much with it…
It definitely is not like. When we were in 7/8 grade riding at cactus park.
Phillip!! Wassup dude? Been a long time
You F ing rock!
You rock!
Nice! I wonder what kind of power this 7.3 with headers and programmer would bring to the table.
40 pound feet of torque only with better flow👍
I was blown away at that number
This mountain biking stuff looks like a rush I might have to go try something like this
It’s a blast
probably the way you rolled into it the first time
Yeah. Didn’t feel like the dyno was loaded before I hit speed limiter too
good job
Thanks. Fun , fast, and cheap
Dave, how did you not start and listen to the truck at every stage? Cut off, "resonator", then final.
FYI turbos make pretty good mufflers 😂
Haha. I thought about it for sure. But it was so sketch on the lift I didn’t want to chance it
Next time you’re out at Beacon let me know. That’s my home trail system and I can show you around.
Right on. Thanks
Great video btw!