hey there ! thank you for the really nice video ! I would just like to add a small tip since you said it's one of your first machines for wood. I'm buying this machine as well and I'm not sure if it's included but even if not it would be very easy to make one with the machine itself : if you cut without holding the "off cut" (the right part) you should have something to create a space between the part and your fence (usually a small block between the fence and your material) to avoid the kickback and eventually getting the off cut thrown back at you (which can sometimes hurt !). also when your hand is closer than 4-5 cm from the blade use that black plastic to push it. you should have one for forward pressure and one for lateral pressure just in case ! thank you for the video !
Thank you very much for these words! It seems that the side part already comes with this I probably omitted to present, that it can be set depending on what we cut if it is long or short it can be moved and adjusted to your liking ... I will come back with a video in which I will present more this and other details that I am extremely excited about this machine that I use weekly for various projects.
Thank you very much for this message! I am delighted with the opinions of the followers! I will definitely make more videos about this cutting board because after using it I am more impressed! 😊
Thank you for the advice ! That's what I do now ... at first, for the first use, since it's my first cutting table, I didn't even know much about it. But today I can say that I am extremely satisfied and delighted with its quality.
At 20:00 you are doing a super dangerous cut. NEVER ever use the mitre gauge and fence at the same time. It is the most common cause of kick back.. Just a friendly advice.
Yes, thank you very much for your thoughtful message! I am a beginner and yes ... a little later I realized how dangerous it is to use the products without knowing how to do it correctly! So I'm still documenting myself and using CZcams instructors to educate myself to use in the future! I thank you for your time!
fantastic video , i have been looking at this machine myself. after seeing you use it straight out of the box like that i was impressed, off to the shops tomorrow and try to find one. thanks again
There doesn't seem to be a difference between them but I think the 2704N is an upgrade but I can't find the 2704 model in my country so I can compare them. I am extremely excited about this table more than I can expect considering that a 260mm blade can actually cut over 100mm!
Just got the same table saw I find a bit strange the way it star .. it's like the break is on. ?? Right one the start a millisecond...Is this Normal let me know thanks Mario
When I made that video, it was the first time in my life that I used this type of equipment. Thank you very much for this information, which is otherwise very useful and very helpful in this job that I practice with passion. Later, I noticed this and it is practically appropriate that the blade should not be too much higher than the cut wood.
Kad ugasis masinu testera pri stajanju deluje kao da nije u centru,to ne bi smelo da se desava,kosta skoro 2000 e.za te pare moze da se kupi vise nego pristojan profi cirkular cak i kombinovani.
Never use the fence and the sliding mitre at the same time
hey there ! thank you for the really nice video ! I would just like to add a small tip since you said it's one of your first machines for wood. I'm buying this machine as well and I'm not sure if it's included but even if not it would be very easy to make one with the machine itself : if you cut without holding the "off cut" (the right part) you should have something to create a space between the part and your fence (usually a small block between the fence and your material) to avoid the kickback and eventually getting the off cut thrown back at you (which can sometimes hurt !). also when your hand is closer than 4-5 cm from the blade use that black plastic to push it. you should have one for forward pressure and one for lateral pressure just in case ! thank you for the video !
Thank you very much for these words! It seems that the side part already comes with this I probably omitted to present, that it can be set depending on what we cut if it is long or short it can be moved and adjusted to your liking ... I will come back with a video in which I will present more this and other details that I am extremely excited about this machine that I use weekly for various projects.
Excellent video ,very helpful to me for sure thanks you
Hi I was impressed with your vid on the saw I have ordered myself the same saw . Keep up with your work I will be watching you in the future 😎👍Nick
Thank you very much for this message! I am delighted with the opinions of the followers! I will definitely make more videos about this cutting board because after using it I am more impressed! 😊
You should use the push stick that is supplied with the saw.😄😄😄
Thank you for the advice ! That's what I do now ... at first, for the first use, since it's my first cutting table, I didn't even know much about it. But today I can say that I am extremely satisfied and delighted with its quality.
Very helpful, thank you
At 20:00 you are doing a super dangerous cut.
NEVER ever use the mitre gauge and fence at the same time. It is the most common cause of kick back..
Just a friendly advice.
Yes, thank you very much for your thoughtful message! I am a beginner and yes ... a little later I realized how dangerous it is to use the products without knowing how to do it correctly! So I'm still documenting myself and using CZcams instructors to educate myself to use in the future! I thank you for your time!
What he said. Don't ask me how I know.
Your English is good and you’re video is great.👍
Thank you very much for these words! It matters a lot to me that I am at the beginning of the road without experience!
fantastic video , i have been looking at this machine myself.
after seeing you use it straight out of the box like that i was impressed, off to the shops tomorrow and try to find one.
thanks again
Thank you so much for this comment! The opinion of my followers helps me a lot!
Thanks for the vid!
Bravo. Ești tare
Multumesc mult ! 🤗
Makita 2704 and Makita 2704 n both are the same or have any change between the two thank you??
There doesn't seem to be a difference between them but I think the 2704N is an upgrade but I can't find the 2704 model in my country so I can compare them. I am extremely excited about this table more than I can expect considering that a 260mm blade can actually cut over 100mm!
Just got the same table saw
I find a bit strange the way it star .. it's like the break is on. ?? Right one the start a millisecond...Is this Normal let me know thanks Mario
I too have this saw (2 years now) and mine do the same. Not a problem so far 👍🏻
Soft start. It avoid to trip your electricity breaker
Lower the blade when cutting thinner wood.
When I made that video, it was the first time in my life that I used this type of equipment. Thank you very much for this information, which is otherwise very useful and very helpful in this job that I practice with passion. Later, I noticed this and it is practically appropriate that the blade should not be too much higher than the cut wood.
منشار أروع من رائع❤❤❤
Kad ugasis masinu testera pri stajanju deluje kao da nije u centru,to ne bi smelo da se desava,kosta skoro 2000 e.za te pare moze da se kupi vise nego pristojan profi cirkular cak i kombinovani.