Repair it Yourself With This EASY Drop in Kit // GTV VESC
Vložit
- čas přidán 27. 07. 2024
- With the right to repair act right around the corner for California, Floatwheel seems to be taking a proactive stance on the matter with their own drop in VESC kit for Onewheel GT. This drop in VESC kit makes it easy to repair the GT yourself in a few hours compared to sending your board all the way back to Future Motion for repair. How important is the right to repair for you? Do you see kits like this an important part of a growing ecosystem of self balancing tech? Lets have that conversation down in the comments!
CHAPTERS:
---------------------
0:00 - Intro
2:26 - Hardware install
4:58 - Software Summary
6:54 - Side by side with a stock GT
12:18 - Hill Climbs
18:06 - Closing Thoughts
Join this channel to get access to perks:
bit.ly/3g2piyc
Sign up for text alerts when videos drop!
tinyurl.com/tflalerts
Follow us on Social!
Instagram: @TheFloatLife
Facebook: @TheFloatLife
Reddit: U/TheFloatLife
OUR FILMING GEAR:
Microphones: tinyurl.com/DJI-Mics
Gimbal: tinyurl.com/DJI-RS3-Pro
Black Magic 6K Pro Camera: tinyurl.com/Black-Magic-6K-Pro
Cannon R5 Camera: tinyurl.com/Cannon-R5
GoPro Hero 10: tinyurl.com/GoPro-Hero-10
Insta 360 Go2: tinyurl.com/Insta360-Go-2
Atamos Shinobi Monitor: tinyurl.com/Atamos-Shinobi
Samsung T5 SSD: tinyurl.com/Samsung-T5-Harddrive
DJI 3 Mini Drone: tinyurl.com/DJI-3-Mini
Rode Mic: tinyurl.com/Rode-Video-Micro
Camera Cage: tinyurl.com/small-rig-camera-...
To learn more about Onewheel Accessories, make sure to visit our Onewheel Accessory Guide here: thefloatlife.com/pages/onewhe...
TFL Enduro Tire - GT: bit.ly/3CWVT1z
TFL Enduro Tire - XR: bit.ly/3TmcVv5
TFL Life Savers - GT: bit.ly/3Ti6UQb
TFL Life Savers - XR: bit.ly/3RSELy4
TFL Tire Sealant: bit.ly/3MuDlZJ
TFL Homebrew Rails: bit.ly/3rUOVna
TFL Onewheel Footpads: bit.ly/3RYmwqY
TFL Onewheel Grip Tape: bit.ly/3RYYtYU
TFL Onewheel Stand: bit.ly/3EFPKbc
TFL Onewheel Bearings: bit.ly/3CTO1h6
TFL Onewheel Sidekicks: bit.ly/3EFvM0m
TFL Onewheel Lock: bit.ly/3rPPKOj
TFL Lifestyle Clothing: bit.ly/3CsMXiV
#TheFloatLife #Onewheel #TFL #FloatSupply #Esk8 #PEVcommunity #ElectricRidables #OnewheelLifestyle #JeffMcCosker #NightRiding #WheelFunStuff #BodhiHarrison #ElijahSoto #FloatOnMyFriends #Onewheel #OnewheelXR #OnewheelPint #OnewheelRider #OnewheelGang #OnewheelPlusXR #OnewheelAccessories #OnewheelNation #OnewheelTricks #FloatPlates #TheAccessoryOG #Esk8 #PEV #Esk8Squad #Esk8Riders #Esk8r #Esk8ordie #Esk8Life #DestroyBoredom - Věda a technologie
11:50 the fake flywheel has me dying haha.
Bruh i didnt even notice 😂
This so exciting!Thank you guys for making this vid!the beta kit seems missing a Bluetooth attena during installation, my badn I didn't got time to send u guys an instruction😂 also the head lights are not included in the beta kits, but we have got them out today from the smt line. Stay tuned, it's literally 2 weeks😂
🙏🏾 Tony 🏆 84V max? but what's the highest battery config we can stuff into the GTV? 👀
What will be different from the GT-V kit and reusing the V1 electronics from ADV pro when v2 electronics released? I know you previously stated that the ADV/Pro v1 electronics could be repurposed to vesc GT. will I need BOTH the v2 electronics AND GTV kit to get my ADV pro and GT updated? thanks in advance. Getting my USDC ready :)
@@jaefrmbk2k the max input is 100V
@@drjaywhiz reusing the v1 esc is doable you are gonna need a Slim version of LCM which we will provide later otherwise it wont fit
TAKE MY MONEY
Dang, that is one impressive upgrade. Looking forward to seeing the Floatwheel VESC-XR in action.
Tony is opening up doors for people, we gotta respect that!
I have an unresponsive GT I'm trying to fix for a family member. I cant wait for this drop-in kit to come out!
It's pretty much out!
5:01 - Nico’s officially the Wembanyama of the TFL crew.
So STOKED for this drop in kit. 🤙🏼⚡️🛠️
Thanks. I'm interested in this, not because my GT is broken but because I don't want to hear haptic buzz on it anymore.
Man, so glad I didn’t go down the trade in route. This is where it’s at right here! Props to Tony and the crew for making this happen. With this and a couple more upgrades and my GT will be dialed in 🤙🏻 can’t wait!
The idea of having a vesc without the concerns of incompatibility with existing GT accessories is the true win. At much as I love the Floatwheel, I’ve put money into my GT accessories. This gives them new life.
I've been thinking the same thing. FINALLY a true solution
Please carry this when it’s out!! Would love to get my hands on one of these bad boys but not have to go through crypto…
5:02 need those TFL high heels they've got Nico beta testing
Im just like there’s no way this kid is that tall hes trolling
Awesome! Can you do a side-by-side comparison video against the GTS?
Damn, can't wait for the retail version. I don't need one right now, but I want to support this project and be prepared ahead of time for when I _do_ .
Tony's kits Just Might be the thing that prompts FM to release digital re-leveling 😂🤔👀
Yes they should be worried.
It'll be too little, too late...
Can't wait for retail version. So stoked! Thank you Tony!!
Here’s why you could climb without ATR. I bet Nico had torque tilt enabled, that will also raise your nose when climbing steep stuff - so it acts like a backstop when ATR isn’t there
This is correct, Torque Tilt was definitely key there. That's my bad, didn't know they were going to run no-ATR tests so I hadn't mentioned that Torque Tilt is also a factor. It was set to 0.10°/A with 15A start current threshold I believe, so not too major but definitely beneficial in keeping that nose off the ground
@@nicoaleman was any Field Weakening set on that GT-V? 👀
@@jaefrmbk2k 45A, 65% DC, 500ms Ramp Time
@@nicoaleman🤜🏻🤛🏾
@PrestigeWheelRide Ideally, you'd want the ramp time to be as low as possible without experiencing negative side effects, such as in low speed high load situations that cause DC spikes, or just in general when transitioning to Field Weakening at speed. I've never experienced any noticeable transitions or side effects with 500ms personally
nico got taller
been drinking milk
Nah Jeff actually just shrank
California sunshine does that
Being on vesc gives you height control too
Love this, definitely hoping yall make a range test video!
You're going to have to beg Julian. He hates making those 🤣
We definitely need a range test
Dude holy hell that 2:31 made me almost cry of laughter
BIG thank you to Float life, Floatwheel and Tony and Nico's "Fast Flow" tune! I ride a GTV now!!😀The setup was easy (a bit nervous though, as I've never done a Vesc board until now, nor opened up the controller or battery lids beforehand, hey never bought with crypto currency either!
The board rides like a dream and if the board would break down in the future im not feeling stressed out having to send it overseas living here in Europe! Cheers from Sweden!
As advertised, tomorrow is today~!~thanks team, Nico on a box, whoa~!~Keep 'em coming....~!~Right to repair is essential.
XR kit too! I have both let’s go!!
I absolutely love you guys! I have purchased just about everything you can from your shop for my GT and god for bit when the board goes, I’ll be purchasing that as well!!!!
What an awesome company!
Literally just got my first Onewheel like 2 weeks ago and am loving it will definitely be buying this to support tony and I’ll be ready for when my board breaks 👀
Haha I literally just recorded a hill-climb comparison between stock GT vs VESC Pint and found the same. I even got that "overcurrent" red light of doom, too!! 😅 I'm so pumped that people will have an easy option to VESC their GT now!! 🙌
Also, how did Nico grow 2 feet?? 😂 I need some of that myself hahaha
We need xr-v kit🤞
That already exsits
@@Grace_580 where to buy?
Search "Little focer complete box, " or " custom wheel complete box"
nope@@Grace_580
this is the future
Auden is the future
moo
@@notsure6070 sus
@@IkeTV. buh
@@auden_builds bruh
TFL, you should work with floatwheel to be the distributor in the US for gtv kit!
FM would sue them into the ground 😂
That kit is super dope!
When my gt craps out,I will definitely be getting one!
This is so good! THANK YOU, TONY! THANK YOU TFL!
Someone had to answer our call. Thank you guys. Hopefully this bleeds down to all the OW ever created. 🍺
The teleporting gets me everytime 😅. Yal make the best videos 👌 🔥. Great review...looking forward to the range test👍
That Cali sun is treating Nico well I see, he grew so much in just a month
The daily photosynthesis sesh is finally showing some results 😤💪
Awesome that you’d make something like this. Keep pushing boundaries!
So stoked for more people to get into Vesc with this kit! Also might be a good move to make the motor connector tighter since that’s a common failure point. Range wise if you ride it the same way you ride stock GT it’s gonna be same range due to energy conservation, but obviously when you’re on a VESC you push it harder!
With a motor retainer clip, either from 1WP, TFL or some custom one, it's not an issue right? I can't imagine it being. Combined with dielectric grease should be low possibility of failure on the motor connector.
@@garrymullins my motor connector blew even with a retention clip. IMHO at the rate these connectors are failing even with retention clips, it's safe to say the GT motor connector isn't even designed to handle the current stock GT delivers, let alone a vesc controller that can easily double that. for comparison, most DIY vescs are running 4mm bullets per phase. GT motor plug phase wire pin is around 2.5mm. Likely that connector will bottleneck performance quite a bit and running that on vescs might be pushing it too hard for it to fail even more frequently, but it's not something tony can fix with a drop-in kit because you'll have to mess with the motor side connector
This is awesome Jeff!! Keep up the great videos sir 🎥
We need this for the pint omg
I may have to buy a couple of these before my board breaks. Looking forward to the Pint drop-in first.
Hell yeah thank you for making this!
Can't wait for Tony to release the PintV drop in kits!
I live in New Zealand and have been hanging out for the this 🎉
Imagine if FM just gave the GT the GTS update and everybody didn’t have to go this route and they’d keep customers 🤯
1000 ‼️
If they didn't take away IMU re-level so folks could just run their damn aftermarket rails they would lose less customers and sell more boards 🤷♀️
@@TheFloatLife100 percent. So glad I didn’t update.
It doesn't change the future motion repair process and repair cost.
@@Kay0Bot True, it would be even better to have certifications for repair shops. Not everyone can send back this things to the US or repair them themselves
take my money. I'll buy it now!!!!! how, where, when can i get this! like lijah said, haptic buzz makes for such an unsatisfying ride and i want it gone. i really want to do a focer build on my XR, but in the mean time, i would LOVE LOVE LOVE to un-futuremotion my GT!!!!
please do this for the XR and I would jump it instantly!
My board is broken (dead BMS) and Future Motion support is non existent in Europe as it would cost a fortune to send it to repair with them. I would love to go VESC as easy as this kit
keaton packed my order from you guys, appreciate him heaps
2:30 always with the sick drops both tricks and products 🤙
For my GT with WTF rails at 1100 miles , it’s a no brained I will buy this once available
FM's not gonna like this one 😮
Well, FM created this market/solution due to their practices. If they have anybody to blame, they can blame themselves.
The optics is BAD. Very, very bad. FM need to the get community spin crew out there as soon as possible. Like 5 minutes from now.
@@Zetler I wouldn't be surprised if this vid gets deleted.
@PrestigeWheelRide If Tony makes it, FM will go after it. FM is shifting their focus onto him. I agree it doesnt violate patents. But that doesnt mean FM's investors wont try and stop it.
Stick your bluetooth antennae sticker on the plastic ledge piece of the cover that allows the GT status light LEDs to shine through. On a Floatwheel ADV board, the case isn't metal so you can stick it on the side no problem. GT case on GTV is metal and I suspect that sticking it directly on there can cause issues. Metal plates under custom footpads will also cause signal interference and that plastic ledge is also optimal for that as well since it appears to leak through it. Once I stuck my antennae on the plastic ledge my signal issues disappeared. Tony will be advising on similar soon. Tip: RT data values in VESC tool change rapidly and is a great indicator of signal strength because you can actually see the number change slow down as signal decreases and speed up as signal increases. If you have any doubts, do your testing that way and you will see exactly what I mean.
This is the future! It’s also what happens when FM tries to control repairs and limit the ability to allow digital tilt for aftermarket rails. I’m sure Julian and the folks at FM are fuming over this but it’s what happens when you continue to chastise your core community and throw lawsuits out every direction. We get so many people coming in to our store before ever owning a Onewheel and they’re all saying how much they dislike the company and how they don’t want to buy from a company that treats their customers this way. Many still end up buying but VESC is getting closer and closer to being consumer-friendly. Hopefully this helps FM loosen their restrictions going forward because their company was grown by the core community… even though they might not see it that way.
I will wait for the Pint X drop in kit :D
Been waiting on this since I saw the post yesterday!
Yall need to do a custom tune video for vesc. Jeff's always talking about His tune and I really want to know what it is.
🤫
My XR is waiting for the kit too 😍
Now that we’ve got the ability to unleash, the GT’s potential would be nice to see the heating results of the motor and if any additional accessories required to
cool down. The overcurrent warning on the stock GT hill attempts got me thinking.
think overheating is gonna be the biggest challenge. And it's probably gonna need additional solutions
🤘🤘 super excited
Anyone else keep watching that drag race moment over and over? So interested in the speed capabilities with duty cycle being available.
🤙 sounds awesome!
Going forward, I require Nico to be taller than the rest of the crew on film. And I request you make him a little taller with each video 🤣
Definitely need a drop in kit for the XR. Steering away from Future Motion is the way to go for me.
Wow, this is good stuff boys.
Can't wait!
this the one 👀👀
love how y'all framin it more like a board repair 🤓 🫡 meanwhile we tryna Upgrade/cut the cord/dive into that VESC life 😄🎉🤙🏾
please range test/delve into the thermals 👀 🙏🏾
this is literally the answer for gts speeds with gt range.
Very exciting…I probably need to read up on “duty cycle” for these VESC settings
VESC is Awesome guys. 🤘🔥😎
If future motion doesn’t wise up, soon we will only speak of them in past tense.
💯
This exciting. But imagine what a drop in kit could do for a PintX. Full Pocket Rocket
While can't wait until this is available so I can vesc my gt then u can set your own push back wow that's nice
I need this in my un-updated GT more than I need air
Really excited to be able to buy this upgrade. Great video. Was Nico standing on a chair next to you Jeff? 😆
Nah, Nico is actually 6'9" tall
Im ready
Yes
Nico your a total bad ass.
Very excited for this. Future motion could add so much more performance to the GT but they likely won’t because they want to upsell everyone the GTS. Hope they prove me wrong though!
Can’t wait you do the same for XR+battery pack! (Just for right to repair of course, not an upgrade 😉)
"Well fu.. Ah.. Well God damn.. 👀"
😄
Love it
Yes please!
Nico on a box 😂
Keaton your shirt is fire 🔥
I got more too. Stay tuned.
This is great news
Jeff for president
You think I want that responsibility?! 😅
@@TheFloatLifePresident of FM (I wish 🤷♂️)
Will you guys be getting them in as I don’t have bitcoin and will be keen to bye from you guys 🎉
Sold 🔥
Sick outro! Who did it?!
At last! It would be great to be able to buy modded GTs from the outset!👍🏾🙏🏾😎 🏴🇸🇪🇹🇹
wooo this is awesome!
I wonder if this will push future motion to give the GT, GT-S exclusive features like the gradient tracking?
This looks amazing. Please can you guys do a PintX vs PintV when that drops? 🙏
Lets get a ramge test sofar i can't wait for it to come out soon
Oh yeah!
With the ATV BMS, are our battery options now open as well?
will The Floatlife have a Link for there Vesc Preference setting that would be good because alot of people trust you guys and your recommendations.
Would love to see it compared to the S.
@nicoaleman just got the GTV kit from the float life. I have WTF rail. Do I need to calibrate its pitch? how do I set up when the heptic buzz kicks in? sry new to VESC and a lot of the videos gear towards older VESC versions?
Floatwheel offers good support for their products. if the board needs adjustment send them an email.
This is nice for those with GTs but what about some XR-V love? I've been dragging my feet getting my Lil focer installed but that's about to change.
PS. I love that the MTE 655 lowered the weight of my CBXR!
Hell yeah! I have a GT and will never buy from FM again and will scare everyone else away from them. They are horrible. I am gonna get the GTV!! I wonder what it will cost.
they say about $449-ish. pre-order cheaper
I like to see range test vs stock Gt and a full comparaison vs floatboard
Damn Nico! What TFL feeding you?
GTv vs ADV?