DIY Greenhouse With ZERO Cuts Needed!
Vložit
- čas přidán 24. 06. 2024
- This DIY greenhouse build tutorial is all about how to build a greenhouse from start to finish. This greenhouse build tutorial shows the step by step process of assembling a greenhouse with zero cuts needed. Bring Your Own Tools (#BYOTools 173).
HUGE thank you to Homestead Supplier for sponsoring this week's video. Check out their amazing product line HERE: homesteadsupplier.com/product...
Interested in how we built the floor system. Full tutorial HERE: • How To Make A LEVEL Fl...
Material List:
-Homestead Supplier Floor System: homesteadsupplier.com/?aff=3
-Galvanized Nails: amzn.to/3tfRaCL
Tool List:
-Framing Hammer amzn.to/2XmNErF
-Drills amzn.to/2SbHzO1
-Palm Nailer amzn.to/2RvgW1A
-Air Compressor amzn.to/2IzBeEo
-Framing Nailer amzn.to/2VYLLQx
-Tape Measure goo.gl/nguoOO
-Speed Square amzn.to/2FrIuQK
-Contractor Square amzn.to/2TER2O5
-6' Level amzn.to/2J301Qo
-2' Level amzn.to/2RuPUHF
-Finishing Nailer amzn.to/2SxBuvA
-Paint Sprayer amzn.to/2Ux7Nv4
Apparel List:
-Georgia Boot (20% off with "BYOT"): bit.ly/395WxO6
-BYOT Shirt: bit.ly/36tsgE0
-Knee Pads: amzn.to/3y2T0XT
MUSIC:
0:00 - Venice Beach: Topher Mohr & Alex Elena
19:02 - Pata Pata: Miriam Makeba (Matt Cherne Remix) www.chernebeats.com
#byot #diy #howto - Jak na to + styl
Your drip edge should be held off of the fascia by 1/4" to break the hydrostatic pressure. The water is going to run down the side and not kick off as intended.
that was't a real drip edge, it was flashing, the kit should have provided that.
I am fully impressed! It's just a complete czcams.com/users/postUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 plan with the best resources and step by step instructions . These shed plans are so satisfying as if the sheds build themselves on their own. Worthy work Ryan!
It's nice looking. Nice job with the install.
I'm concerned about using OSB in the decking. It wont last long.
A professional tip for your next video. Level, is horizontal. Plumb, is vertical.
I love this greenhouse. You make it look so easy. The way it goes together makes it possible for anyone to build one themselves.
My thoughts exactly Mitch. Thanks so much for watching and great to have you on the livestream today.
This is a buy and assemble....
I can't believe you have an OSB floor which is going to get wet from watering plants. It's also going to get extremely cold under the floor. The least they could have done is paint the floor with a mixture of oil based paint and linseed oil both beneath the floor and inside, including edges, and put an inch of insulation board under the OSB to help keep it warm. Oh well, only time will tell how long it lasts. I also suggest painting the inside walls and studs to protect it and make it last. Other than that, it's a nice job and structure.
He also totally skipped that part of the build... I'm sure it took lots of "cuts."
Louisiana Pacific agrees with you per their Warranty. Para iii
Installation/Maintenance
(i) Product Application and Site Preparation must be completed as per LP’s Application Instruction and per the
Shed Manufacturer’s Application Instructions.
(ii) The structure on which the Product is used must be in compliance with all applicable shed requirements.
(iii) TheProductcannothavebeenusedinanexteriorexposure or in an interior space that creates an exterior environment. The Product may not be in direct contact with the ground or used in any application which allows for the accumulation of condensation or other free water or which subjects the Product to a repetitive wetting condition at any time during the warranty period other than normal rain conditions expe- rienced during construction or installation of the Product.
The floor/foundation was a separate video and not part of the kit.
@@nhinja The floor set up is in a different video.
Cover it with Red Guard & Forget about it
Greenhouse LOOKS great and quality beyond most kits. Imho needs to be on footers with an open floor for drainage, and needs some sort of temperature management as an option. If those sliding windows were tilt out, simple wax-filled automatic openers could be used on them. As pictured that greenhouse is going to have a constantly wet floor and get too hot unless you can attend to it full time.
The build quality and attention to detail look phenomenal! Adding this to my list for when I'm ready. Probably a few years off still, but man, that's impressive!
I really enjoy all the content in this channel. This deserves at least a million subscriber. Let’s give this guys a like for all his great works!
That is one beautiful greenhouse. Great job explaining how it all goes together.
Thanks so much for watching and all your support ;)
I applaud you young man for sharing your project. Never mind all these negative comments.
This is beautiful, congratulations! I hope it brings years of happiness
The finished result looks so good! Love this style of greenhouse. Great job!
Thanks so much BT and this project turned out amazing that’s to your help along the way.
That was really enjoyable to watch you build that greenhouse. I need to build 3 greenhouses on my property and I think this looks beautiful and very functional as well. I am not a builder by trade so I would feel much better if I pat someone to do it for me. Thanks for the awesome presentation.
it really looks lovely...the color is perfect.
Great to hear and thanks so much for watching Amber.
Wow great greenhouse, thanks for sharing.
That’s a killer kit. Impressive.
My thoughts exactly TJ. Thanks so much for watching.
That's a really nice kit, turned out great 👍
Thank you for sharing! Excellent video!
Beautiful end result
Thanks so much Amrit. Great to hear.
Wow! That looks like a great greenhouse.
Great video great view. Woodworking. Great work great job. Green house. 👍
Thanks so much Peter. Truly appreciate the kind words and support.
Great video as always, keep it up
Wow, who knew the solution to not making cuts is to spend 5x more on lumber than you would normally pay! What a steal!
Well for this price you get a few Windows too
OSB floor in a greenhouse?? LOL good luck
Dang that is a nice greenhouse. Nice work Brent!
My thoughts exactly James and thanks so much for watching.
👏 👏 👏 Fantastic job my friend. 👍
I wonder if I this would be viable to have power and water run, insulation, and make a standalone laundry room. Our set up at home is kind of a nightmare and I wouldn't mind simplifying, even if it is technically outside of the main house.
Great build and super educational for us DIY'ers. The kit looks really put together well with good materials. My only concern is the particle board floor getting wet, it's a greenhouse. I guess you could lay lino or upgrade to concrete board & tile and that would solve that problem. Great video, thanks 🙂
As a 21 year old now working in construction I loved this kit build. I did gymnastics for 14 years and got badly beat up and ended gymnastics at age 18. I then didn't have gymnastics scholarship for college and ended up in community college when pandemic closed my school down. That led me to a funk and excessively exercising but then to working for Menards in the buildings department. From there I got hired to a construction company and fell in love with construction. I'm learning a lot. Just found your videos. Love the product quality a lot. I'm now a new subscriber.
I’m sorry to hear about the derailment in your plans. But good to hear you love construction, I heard there is a shortage of craftsman out there.
I’m sure you’ve discovered Matt Risinger channel also. If not, you should check it out!
Wish you all the best!
@@angellas.1314 Thanks. Plans do change and that's a fact of life. Yeah I know Matt's channel and it's great. I also like the Perkins Brothers Builders channel a lot. Makes me want to move to their state.
GREAT JOB
Awesomeness
Love it!
Thanks for watching Daniel.
nice kit
Sweet!
Great to hear and thanks so much Lisa.
Drip edge is suppose to be installed with a finger width gap to the fascia
Using pressure treated materials would be a good idea, also a drawing that lists the cut dimensions for someone who wants to cut his own lumber.
It’s a kit, so you aren’t going to get that. But there are lots and lots of free plans for greenhouses and chicken coops and sheds online that you can download with all the materials and cut lists you could ask for. The Googoracle is (mostly) all knowing.
Alright! Alright! Ill buy a damn palm nailer! 😊
Love this build! Was wondering if these greenhouses would serve their purpose in NJ. Normal greenhouses wouldn't be insulated enough to withstand the cold Jersey winters and I'd have to bring the plants inside. However, this greenhouse seems to be top of the line and well insulated/has provisions for insulation as well. Looking for your thoughts on implementing this structure into a Jersey landscape...
greenhouse is high humidity and water, is a particle board floor really the best option?
Very beautiful green house 🏡
Is the reason you had to cut and swing in place the door panel because you decided to put on the last piece second to form that strong corner initially? Or would you still have had to cut a piece?
Whats the cost difference between building something like this from scratch vs a kit? Because with the looks of it this was a well put together kit so I imagine the mark up for that is quite high.
On their website, this 10x12 is around $7,300
It can be cheaper to buy kits as the company can bulk buy materials and pass that on. But if you are not counting your time (labour) in making it and you do a lot of searching/research and you have all the tools, you could do it cheaper but it will take a lot longer.
These would make lovely private shelters for the homeless too.
Great question and the kits them selves are at a high price but that’s because they are American made and they are extremely high quality. I’m sure you could save 1000 or two if you built it all yourself but think of the amount of time you’re saving with a kit that comes assembled like this. It would’ve taken me weeks to build something like this from scratch versus just a couple of days.
Cheaper to build it yourself. 🏡
great
Thanks for watching as always.
I agree OSB is horrible for the floor and the siding on these panels is t11 pressboard which will get wet expand and not last a year in wet weather garbage
wood floor is going to get bad fast you need to seal it and make some kind of drainage
The roof rafters look to be chiefly sitting on the T111 put in place for your soffit. This does not seem very strong for snowload or wind pressure.
Aww man I done spent all my money on the Aux box 😄
What kind of quick clamp is that? I don't recall ever seeing one like that in hardware stores. Thanks!
The building package looks good. the base of the structure should be tore down and rebuilt properly!
Please add where and what squeeze clamp your using in this video. Thank you
You make it look so easy. Nice! I want to build a storage shed and share a wall with a green house. Could you steer me towards info/builds?
There doesn't seem to be a link to the clamp that you mention at 4:22 - any chance you can tell us more about that clamp?
Two questions on this one (I am building a DIY greenhouse similar in size myself but on a gravel base). (1) Someone else asked about the drainage issues on a wood floor so was curious how you would address that in this system? (2) would you put chicken wire or something similar to keep animals and such out from underneath the platform? I also built a floating deck and have a shed in the works, both of which are up above ground level and I feel I need to have some sort of material to block animals from getting underneath.
Does the kit come with the floor?
Question, why does your greenhouse have a wooden floor? Shouldn't it be open to drain water?
Hurricane clips would have been a nice add.
For $7,000.00 you could build 3 of these greenhouses. I'm also not sure if that price includes shipping!
I was once inside a wendy house (garden shed) when a pine cone fell onto the roof. What a shocking sound effect. What type of trees do you have above the greenhouse?
>the panels come fully assembled
Aka expensive as fuck.
It definitely won’t last long with untreated lumber😳
Thank you for this video and the pata pata song.
Looks really easy and straightforward. Unfortunately I think that $10k for the kit is cost prohibitive for the average DIYer.
What’s the blue paint color?
พูดเก่งจังครับ
Perhaps a concrete screed to cover that wooden floor would be an adjunct for longevity of said floor in terms of water run off within a greenhouse.
Great option Gwen and we are considering a few things with the floor. Need to do something with the moisture :)
Nice job!
your floor joist are laid down flat?
Just started watching. It's exactly what I want, just need muscle to move the panels/walls. First problem they can easily fix is if they're meant to go in order 1 through...then why are they not stacked on the pallet in that order? It requires you to sort through pallet & restock in order. When you're old falling apart woman with falling apart daughter kind of would be HUGE help if not need to do more moving, lifting, etc. I'll keep watching... Thanks for bringing this product to our attention. 😉
Just finished watching...FANTASTIC video. You showed EVERY step, pointed out tools used, etc. I'm so excited I hope I can get one of these built. I'm going to check out their website, show your vid to my kid. And I have to check out your floor video too.
You used OSB for a greenhouse floor???
hi, what is the name of your black clamp what you using?
It’s a Viking arm! It’s amazing :)
Nice kit - but I did a wood shed once, and once was all I needed to learn my lesson -- go plastic!!!
The prices on them seems cheap.
If you built it yourself, minus labor and the concrete pad. How much would it have cost?
Hi, does anyone have any info on. What the siding panels are called that are used in this kit?
I live in the UK and can't find any sort of finished siding panels like these.
Any help would be great.
It appears to be a product called T1 11 it's a siding which usually is sold as siding and is a 4 by 8 panel
What was the cost of the kit?
What about watering?
I’d rather have the one you tore down. Guessing this one will last about as long (maybe) as that one. This system might be ok for a storage shed, but not a greenhouse.
how much is the kit???
What do you do about water inside? I can see things rotting out very quickly.
I’m assuming you’re worried about the moisture from watering the plants coming down and hitting the floor. There will be some mats down to collect the majority of the moisture and most likely we will also be painting the floor system for a protective coating. Thanks for watching and asking.
Amazing instructional videos. everything is amazing (direction, voiceover, installation process etc..) but this repetitive music is annoying. Request if you can change the music.. 🙏
Thanks so much for the kind words and the constructive criticism. I’m always looking to improve the channel and I know music can play a big part in that. In the future it will be something that changes but I can’t tell you when as of yet. Just know that it’s on my mind and thanks for watching.
Easy set up.
But I'd be surprised if those materials last a year.
👏👍💪🔥
Cost?
Love this greenhouse!
My only concern is the wood floor, and nowhere for the water to go.
Do you, or the manufacturer have any suggestions for protecting the wood, and providing drainage?
Thanks for sharing another great video.
❤️🌵☀️⛈️🌈☮️🐎
There should be no water getting it there.
@Saul Goodman unless you're using it as a greenhouse, right? Plants, shrubs, and seedlings need water. Each plant is not going to be moved out and then back in for watering. Alas, the concern about a wood floor and water that has no drainage scenario.
@@Eric.Mercado You are soaking it. Why would water get on the ground?
@Saul Goodman What am I missing here? If you water a plant that is in a container with drainage holes the water drains out the containers....ONTO THE FLOOR. How do you water your plants housed in a greenhouse?
@@Eric.Mercado Why would there be drainage holes in a plant? There should be something under that.
It sill only be a few splashes.
People must be growing gold bearing plants to buy a $7,000+ shed with some transparent panels on it. Build it, it’ll be 10 times cheaper to grow 40 cent tomatoes
R the windows glass or?
They are glass :) thanks for asking.
Do they want to donate another kit to me? I'll do a video as well
Safety dictates one steps no higher than the third step from the top of a step-ladder.
doge at 19:14 walked up like: wtf you been doin all day n where's my food?
won't last long as fresh water (via humidity and condensation) is very bad for unprotected wood
bit confused you didn´t open the video with "hello there"!
Good catch haha! Didn't think anyone would notice :) I'm going to be trying a couple different intro's over the next couple of months. To see if it makes a difference with retention. Thanks for noticing.
Level or plumb walls…..
Content great......voice - over.... not good, cringe. Love the look. Regarding the timber floor-there will be constant watering, so where does this water flow, surely not onto the floor and what's to stop the cold air and creepy crawlies coming in.
Please build me one??
literally all shadows
This is how they should sell chicken coops
Hmmm. With that floor this is a shed not really a greenhouse. It needs to be on the ground with a gravel floor. Actually the more I watch this it's a cute, but very poor design for moisture. A greenhouse is hot and damp. I'm not understanding the interior being wood that absorbs moisture...🤔
I agree. That is not appropriate flooring
I'm always amazed at the high number of positive comments on such a bad build, and in this case, a bad product as well. This no-cut "greenhouse" kit is a joke, right? Lets see, there's the "floor joists" laying horizontal, the OSB subfloor, (understandably not part of the kit), then the entire kit using untreated wood, the rafters sitting atop the soffit material, the "vent" being blocked by a 2x4 on the interior, the old school corrugated roof panels, no support under the shelving, no insulation properties......I could go on and on. this is not even close to being able to function as a greenhouse. The only thing that makes it look nice is the paint job and the windows. This is just a really sunny shed, sitting under a bunch of trees, that will be rotten and fall apart in a few years. I don't even give it that long if it will be used as a greenhouse. I feel sorry for the plants. They'll either bake or freeze in this thing.
Forceful "love taps" arr the BEST kind of love taps. 😈
"Zero Cuts" - Um... because somebody else already made ALL the Cuts!
This is Not DIY.
It is a kit.
A contractor would prolly be willing to build this for about 12k$ less than self assembly. Be worth asking anyways.