One shaped board for the handle bar would be stronger. Also, a thick bit of rubber tire sticking up several inches nailed either before the back wheel or in that groove could be used as a break as well as protect the rider from accidental contact with the back wheel.
it works because they're not making the ball bearing system they're just popping it in. the ball bearing and axel system in a wheeled vehicle is the hard part. without that one part the bike would not be possible, and they're not making that part.
Is tecnik ki aaj bharat me bahot Zarurat hy kyon ki aaj petrol 110 rs Ho gaya hy aur hamare yahan bekar Log zada hy aur woh gadi ke bina nahi rah sakte to unki thodi si bachat Hogi aur desh ke petrol ki khapat kam hogi
So he can afford new screws and a drill and a grinder and a jigsaw and all the bits for those tools but you need to build that but of course yours is smaller and can not handle a work load because it is a 2x4. The real men there have just 1 sharp blade. I dare you to haul a full 2000 pound load on that piece of shit.
By looking at it that way you are limiting any sort of progress which is so much Needed,,,. By the way? Which would you Rather have, One that is made in the village Where tools are scarce, or One made in a Place where tools are available,,,. Have a Good day,,,. One Love,,,.
So he can afford new screws and a drill and a grinder and a jigsaw and all the bits for those tools but you need to build that but of course yours is smaller and can not handle a work load because it is a 2x4. The real men there have just 1 sharp blade. I dare you to haul a full 2000 pound load on that piece of shit.
You know what a dandyhorse is. What if a dandyhorse had a third wheel in the middle and the back wheel span freely like wheel on market cart. For this the wheel would need to be smaller then a wheel on a regular dandyhorse.
a happy friend is a good friend. Perfect. Stay away from those haters, even Nature knew youre better
Its nice that the wheels have ball bearings.
eco friendly transport great chukudu
What is reason behind continuous velocity of this chukudu?
What is logic behind non - stop running of this cart?
Pl anybody explain me
Slope
Free fall. Gravity. You've to push it up against gravity
That is a very nice chukudu scooter, nice work.👍(Rasel creations).
i was 7 when i started working on a similar wooden scooter and built a sturdier version than this.simpler too, with foot brake.
One shaped board for the handle bar would be stronger. Also, a thick bit of rubber tire sticking up several inches nailed either before the back wheel or in that groove could be used as a break as well as protect the rider from accidental contact with the back wheel.
There's always someone who can do it better ! Never fails. 🙄🙄
ha ha. love to see you from Bangladesh. sukudu the most popular transport in Kongo. I think it can be used in a rural area in bd also.
Wonderful.. 👌..
Super legal,valeu,vou fazer um😊👍👍👍👍
Chukudu from Africa, Goma
Digital India 😄
Who are all came after seeing GOSU parithabangal😉😉😉😉😉😉
Thank you for making this. I'm going to build one from some wood from a 1930 Organ I scraped for the wood.
Chukudu ആണ് താരം
ഇപ്പോൾ പോളി യേഷ് 😅🔥
Hopd
that rear wheel ball bearing means business. The front suspension blew my mind.
No joke with a chinsy wood axle😂
They normally using car or motorcycle springs and can carry 1000 KG
അങ്ങനെ ഇന്ത്യയും ചുക്കുടുവിലേക്ക് ...!
Need this in india for future petrol pirce too higher than other country
bicycle is better
@@gulshanchaurasia2233 your bicykles cant to care half tone of goods, and you cant to pedal up the clif with half tone of goods
I am still not understanding how it works but it's just mind blowing
it works because they're not making the ball bearing system they're just popping it in. the ball bearing and axel system in a wheeled vehicle is the hard part. without that one part the bike would not be possible, and they're not making that part.
Just imagine like a bicycle without pedal … its work mostly for down road …
I love a car made of solid wood.
ആഫ്രിക്കക്കാരുടെ വണ്ടി ആണോ ഉണ്ടാക്കുന്നത്
Ya😃
Yes
Wahh... Very creative once outdoors
A warm welcome from Indonesia, a healthy, ever-loving holiday
Is tecnik ki aaj bharat me bahot
Zarurat hy kyon ki aaj petrol 110 rs
Ho gaya hy aur hamare yahan bekar
Log zada hy aur woh gadi ke bina nahi rah sakte to unki thodi si bachat
Hogi aur desh ke petrol ki khapat kam hogi
Great work brother.
With huge respect and lots of love.
Ye instrument ham ko chaye .price kya Hai.greate mean.pata tona?
Wow 🤩🤩🤩🤩Very nice.🌹🌹🌹🌹
So he can afford new screws and a drill and a grinder and a jigsaw and all the bits for those tools but you need to build that but of course yours is smaller and can not handle a work load because it is a 2x4. The real men there have just 1 sharp blade. I dare you to haul a full 2000 pound load on that piece of shit.
Its 30% of real Chukudus👍
Yess😊
@@shakilkhan7149
Brother 👍
Wow
Ethine patiyulla news kandirunnu.
Vicharichapole pole simple alla
But great work bro👍👍👍👍
Nice video
One you use power-tools, that's no longer a chukudu. A chukudu is made with an axe and seldom a saw. Hand-saw while at that..
By looking at it that way you are limiting
any sort of progress which is so much
Needed,,,. By the way? Which would you
Rather have, One that is made in the village
Where tools are scarce, or One made in a
Place where tools are available,,,. Have a
Good day,,,. One Love,,,.
@@tneita3166 a modern one of course, that doesn’t make modern ones Chukudus though…
can't find a guide on the traditional method
@@markifi do you need this guide now?
Super 👌👌👌👌👌👌
Brake system is needed bro
No doubt that will come,,,.
Lovely bhai
WHERE THERE IS A WILL A WAY WILL BE FOUND,,,.
Gostei muito do seu trabalho incrível ademiro és um artista parabéns
Veri nice you are Grant for such thing
Very nice sharing frend..
Chukudu from Congo ! How breaks are applied?
I love chukkudu
Have you one? Show us
Why do you use springs? I don't understand what they do.
Wow hend work 👍
Nice Idea but breaks are missing 😂
foot-breaking
Wow super
Verry nice bro
Bravo!
Good idea 👏
Wow...... good
wow Super Good idea
কোন গাছের কাঠ ব্যবহার করলে সবচেয়ে ভালো হয়??
wow nice nepal ❤️
ഇനി മലയാളികൾക്ക് വേണമെങ്കിൽ ഇതിനെ ഒന്ന് മോഡൽ മാറ്റിയെടുക്കാം
തക്കുടു ആക്കി മാറ്റാം
Amezing idea friend. India
Great❤❤🚀
Ось для колеса нельзя было изготовить из металла? Деревянное вряд ли долго прослужит...
Wow amazing,shout out me
ചുക്കുടു 👍👍 ആണ് ഇപ്പോൾ താരം
Gjb yar....😲😊😲😊😲😊👍👍👍👍
You forget to add brake to this chukudu scooter
Very good!!!BRASIL-BH
So he can afford new screws and a drill and a grinder and a jigsaw and all the bits for those tools but you need to build that but of course yours is smaller and can not handle a work load because it is a 2x4. The real men there have just 1 sharp blade. I dare you to haul a full 2000 pound load on that piece of shit.
?????????@@nemo158
വലിയ ഇറക്കത്ത് എന്ത് ചെയ്യും, എടുത്ത് ചാടേണ്ടിവരും😀 കയറ്റത്തോ എടുത്ത് തലയിൽ ചുമക്കണം😀
Kk
ചുക്കുടു ഓടിച്ച് ഞാൻ വീട്ടിൽ എത്തുബോഴേക്കും ഞാൻ തക്കുടു ആയി
Very nice my god u r scientis
Very nice... 👍
Goodness gracious His bare toes are literally 10cm away from that angle grinder! (4min:30sec); otherwise amazing video, and great idea.
Пойду оторву пару штахет с забора , и тоже сделаю себе "чикуду"
അതു തന്നെ യ ഞാനും പറഞ്ഞത് 😊😊😊😊
Сделал уже?
ഇതിപ്പോൾ ഒരു സൈക്കിളിനെക്കാളും വിലയും വരും ഓട്ടത്തിനിടയിൽ ഒടിഞ്ഞും പോകും 😄
Petrol vandallo
Amazing
ভাই এইটা কি পা দিয়া ই ঠেইলা ঠেইলা চালাতে হয়? নাকি একা একা ও চলে??
Good job,thanks för sharing
Not mentioned that! Thanks to you for watching my videos.
085784448117
Good job but better use metal parts to make it durable
Right! However the chukulu is historically made all of wood, not using even wheel bearings but a wooden shaft thru the wheel greased with animal fat.
You know what a dandyhorse is. What if a dandyhorse had a third wheel in the middle and the back wheel span freely like wheel on market cart. For this the wheel would need to be smaller then a wheel on a regular dandyhorse.
Welcome to India
What is the price of It's cycle in india
А на падём как талькат крили забыли паставить эй
Thanks for sharing!👌🏻
Wow 😍😃😀😁😄😜
ഉണ്ടാക്കാൻ എത്ര ചിലവ് വരും
എക്കോണമി മോഡൽ 3500 /- ഡീലക്സ് മോഡൽ 125000/-
അങ്ങിനെ മലയാളികൾ ഒരു പോളി പൊളിക്കും
good item.
Where is the break
How it's running
Good work
Super
Res sir.
👍👏
ഉണ്ടാക്കി കൊടുക്കുമോ?
Nice
I think last they are drop down
Vai apnar bari kothai ?
Y no brakes??
খুব ভাল, কোথায় থাকো তুমি?
Supper brother
how much?I want to buy1, never see in my country.
I can get you one for free but you are in another country
Yaralam parithabagal parthutu inga varadu
No brakes
Made in drc
Good
Apik👍😍
nice
How much is it I want to buy
Spring ?????
Kreatif
ശെരിക്കും ഇതിന്റെ ഉറവിടം എവിടെയാണ് ചൈനയാണോ ആഫ്രിക്കയാണോ ഗയ്സ്...